Professional Documents
Culture Documents
Versaedge Technical Info-New
Versaedge Technical Info-New
8132
Fax: 252.430.8801
860 Commerce Drive, Henderson, NC 27537
Email: orders@versatrim.com
3/32
29/32
VersaEdge Applications
Lock-Down Installations
Floating Installations
Laminate
Adhesive Tape
(Remove Backing
to Apply)
Laminate
Flooring
Adhesive
Adhesive Tape
DO NOT REMOVE
BACKING!
0.375
Flooring
Adhesive
Sub Floor
Stair Riser
1 Piece of Flooring
Sub Floor
Nailed & Glued Down
Stair Riser
Vinyl
Hard Wood
Vinyl
1.866.200.8132
Step 1
Stair Riser
Install the riser flush to the stair. Clean flooring and molding
with a damp cloth (water only) to remove all dust and
residue. Let dry before applying adhesive.
Sub Floor
Step 2
Turn Stair Nose over and gently peel the release paper all
the way off the adhesive tape.
Release Paper
Adhesive
Adhesive Tape
Step 3
Next, apply a generous bead of a Premium Polyurethane
Construction Adhesive along the entire inside corner.
Be sure to overlap the tape with the adhesive.
Caulk Gun
Adhesive
Adhesive Tape
Underside of molding
generously covered
with adhesive
Step 4
Bottom of
Stair Nose
Stair Riser
Adhesive Tape
Flooring
Adhesive
Step 5
Sub Floor
Stair Riser
For Low Traffic, let the LOCTITE PL* Adhesive cure for at
least 1 hour before walking on it. For Heavy Traffic, wait
24 to 48 hours.
NOTE: Complete cure takes 48 hours.