Professional Documents
Culture Documents
AutoCAD 2010 Gamtek 1
AutoCAD 2010 Gamtek 1
Regenerating model.
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: Zero length line created at (114184.0284,
53286.5240, 0.0000)
Command:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (114334.0284,
53286.5240, 0.0000)
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (114184.0261,
51343.6289, 0.0000)
Command: _chprop
8 found
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command: _chprop
1 found
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: _chprop
1 found
Command: *Cancel*
Command:
Command: _chprop
1 found
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: _u
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Command:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: '_.-LAYER
/Unlock/stAte/Description/rEconcile]: _COLOR
Command: *Cancel*
Command: *Cancel*
Command: LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: _u
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: Zero length line created at (113749.5458,
58033.5232, 0.0000)
Command: _u LINE
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 420
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u DIMLINEAR
Command: dimlinerar
Unknown command "DIMLINERAR". Press F1 for help.
Command: dimlinear
Command:
Command:
Pick a point in the drawing: <Ortho off>
Command: _u INTELLIZOOM
Command: _u PPGETACADINPUT
Command: Specify opposite corner:
Command: <Osnap off>
Command:
Pick a point in the drawing:
Command:
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Pick a point in the drawing:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: *Cancel*
Command: dimlinear
Command:
Command:
Pick a point in the drawing:
Command: *Cancel*
Command: offset
Command:
Command: *Cancel*
Command: 0ffset
Unknown command "0FFSET". Press F1 for help.
Command: offset
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command: Specify opposite corner:
Command: _.erase 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Automatic save to C:\Users\YUDI\appdata\local\temp\YESSS_1_1_8467.sv$ ...
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: Specify opposite corner:
Command: <Osnap off>
Command: <Ortho on>
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: <Osnap on>
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: <Osnap off>
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: dimlinear
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command:
Command:
Command: _qsave
Command:
Command: Specify opposite corner:
Command: _.erase 6 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command: _u ERASE
Command: Specify opposite corner:
Command: _.erase 5 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command: offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <260.0000>: 8740
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command:
Command: _qsave
Command:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _chprop
15 found
Command: *Cancel*
Command:
Command:
Command:
Command: _copyclip 1 found
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _qsave
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
*Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: *Cancel*
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Command: Specify opposite corner:
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command: *Cancel*
Command: offset
Command: offset
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
Command:
Command:
Command:
Command: _qsave
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command: _u INTELLIZOOM
Command: _u QSAVE GROUP Regenerating model.
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u
Command: _u INTELLIZOOM
Command: _u Grip Edit
Command:
Command: Specify opposite corner: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command: *Cancel*
Command:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
Command: _properties
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command: BHATCH
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]:
Command: Specify opposite corner:
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command: *Cancel*
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _bhatch
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command: _.erase 907 found
4 were on a locked layer.
Command: offset
Command: offset
Command: offset
Dimension disassociated.
Command: Specify opposite corner:
Command: _.erase 212 found
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _mtext Current text style: "Standard" Text height: 2.5 Annotative:
No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command:
Command:
Command:
Command: *Cancel*
Command:
Command:
Command: _mtext Current text style: "Standard" Text height: 2.5 Annotative:
No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _ai_selall Selecting objects...done.
Command: regen
Regenerating model.
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 2313.53
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Pick a point in the drawing:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Pick a point in the drawing:
Command: <Ortho off>
Command:
Pick a point in the drawing:
Command: *Cancel*
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
Command: _pasteclip Duplicate definition of block _ArchTick ignored.
Specify insertion point:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _mtedit
Command: _u MTEDIT GROUP
Command: _u Grip Edit
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
** STRETCH **
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: _u INTELLIZOOM
Command: Specify opposite corner:
Command:
Command: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command: Specify opposite corner:
Command: _.erase 2 found
Command: _u ERASE
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: _u ERASE
Command:
Command: *Cancel*
Command:
Command:
Command: _.erase 1 found
Command:
Command: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.erase 2 found
Command:
Automatic save to C:\Users\YUDI\appdata\local\temp\YESSS_1_1_1923.sv$ ...
Command:
Command: Specify opposite corner:
Command: _.erase 2 found
Command: *Cancel*
Command: OFFSET
Command: OFFSET
Command: OFFSET
Command: OFFSET
Command: *Cancel*
Command: OFFSET
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Hatch boundary associativity removed.
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u INTELLIZOOM
Command: _u Grip Edit
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: OFFSET
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _bhatch
Pick internal point or [Select objects/remove Boundaries]: Selecting
everything...
Selecting everything visible...
Analyzing the selected data...
Command:
Command:
Command: _qsave
Command: XLINE
Specify a point or [Hor/Ver/Ang/Bisect/Offset]:
Command:
Command:
Command: _u
Command: _u
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u DROPGEOM GROUP
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=Extend
Select cutting edges ...
Select objects or <select all>: 1 found
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: _.MSPACE
Command: Specify opposite corner:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: Specify opposite corner:
Command: _.erase 1 found
Command: *Cancel*
Command: OFFSET
Command:
Command:
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command:
Command:
Command: _qsave
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: _.PSPACE
Command: Specify opposite corner:
Command: _.erase 2 found
2 were on a locked layer.
Command: *Cancel*
Command: *Cancel*
Command: _u INTELLIZOOM
Command: _u VPMAX Regenerating layout.
Regenerating model - caching viewports.
Command: '_.-LAYER
Command: '_.-LAYER
Command: '_.-LAYER
[?/Make/Set/New/Rename/ON/OFF/Color/Ltype/LWeight/MATerial/Plot/Freeze/Thaw/
LOck
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Command: '_.-LAYER
/Unlock/stAte/Description/rEconcile]:
Command: '_.-LAYER
Command: '_.-LAYER
Command: '_.-LAYER
Command: '_.-LAYER
Command:
Command: _.erase 1 found
Command: L
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: CP
COPY 1 found
Invalid point.
Specify second point or <use first point as displacement>: 100
Command: VPORTS
Regenerating model.
Command: *Cancel*
Command:
Command: CP
COPY 1 found
Command: VPORTS
Command: _.MSPACE
Command: _.PSPACE
Command: _.MSPACE
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:100">: 1:100
Command: _SCALELISTEDIT
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:100">: 1:150
Command:
Command:
Command: _qsave
Command: _CANNOSCALE
Enter new value for CANNOSCALE, or . for none <"1:150">: 1:150
Command: '_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.