Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Dolly Test

    Uploaded by

    mahesh
    A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    You might also like

    Dolly Test

    Uploaded by

    mahesh
    100 views1 page
    A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

    Original Description:

    Format gives you direction for making of pull of test result/dolly test.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    100 views1 page

    Dolly Test

    Uploaded by

    mahesh
    A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    PULL OFF TEST

    PROJECT:

    ID:

    SECTION

    DATE

    TIME

    PERFORMED BY

    STANDARD

    S2

    30.03.2014

    05.20.PM

    Sagar Chalake

    ISO 4624

    AIR TEMP.

    REL. HUMIDITY %

    EQUIPMENT

    28C

    53%

    POSITEST-AT-M
    (Manual Adhesion Tester)

    COUPONS SIZE

    ADHESIVE USED

    COATING SYSTEM

    ABBREVIATION

    (5X75X150)mm

    Aralditwe
    Std. Epoxy Adhesive)

    BARRIER 80+
    PENGUARD MIDCOAT+
    HARDTOP XP

    A=Substrate, B=1st layer,


    C=2nd layer, D=3rd layer,
    Y=adhesive & Z=dolly

    VALUE (Mpa)

    COHESIVE
    FAILURES

    ADHESIVE FAILURES

    RESULT

    DOLLY - 1

    7.88 MPa

    NO

    100% - C

    FOUND SATISFACTORY

    DOLLY - 2

    11.54 Mpa

    NO

    100% - C

    FOUND SATISFACTORY

    DOLLY - 3

    8.14 Mpa

    NO

    100% - C

    FOUND SATISFACTORY

    LOCATION OF TEST

    BEFORE

    AFTER

    Customers Inspector:

    You might also like