Professional Documents
Culture Documents
Iec61850 Eng
Iec61850 Eng
SICES IEC 61850 CONVERTER is an Intelligent Electronic Device (IED) compliant with this
new protocol particularly used in smart grids substations.
The device supports different protocols like IEC 61850 and Modbus.
These protocols can run over TCP/IP networks or substation LANs using high speed
switched Ethernet to obtain the necessary response times below four milliseconds for
protective relaying.
Using the IEC 61850 CONVERTER, the conversion available is from Modbus RTU / TCP to
IEC 61850
SICES IEC 61850 CONVERTER can be connected to any device supporting the Modbus
protocol.
The connection with SICES controllers is through RS485. It is possible to connect the
device to the controller using the RS232 port, by means of a proper RS232/485 converter.
SICES IEC 61850 CONVERTER allows to share the main info available in the controller:
Measures
Status
Alarms
Shutdowns
SPECIFICATIONS:
System protocol
TCP/IP
Approvals
Interfaces
TTL/GPIO/ETHERNET/I2C/SPI
IEC 61850
Modbus RTU
800
3000
110bps - 115.2kbps
LED indications
Power supply
832 VDC
Consumption
2.5 W
Operating temperature
-40 to 85C
Rel. Humidity
5% - 95% RH non-condensing
Dimensions
118x53x120 (HxLxD) mm
Weight
290g
Assembling