Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 2

Picture of task/equipment:

Task:
Name Of
Dept:
Job Title(s):
Prepared by:

Date:

OPERATING A 12-INCH
CHOP SAW
Sheetmetal; Electrical; etc.
Various
Mohammad Farooq

10 Feb 2014

Required PPE:
1. Safety glasses
2. Face shield
Required/Recommended Trainings:
1. Operation of chop saw
TASK
1. Check saw blade for
sharpness, obstructions,
properly functioning guard

HAZARDS
Loose, obstructed, or
dull blades or guards
create pinching hazards

2. Align materials flat on table


and flush to the back of table
3. Start and operate saw.

Pinching fingers or hand

Prepare By:

Cutting fingers and


hands
Flying sawdust

CONTROLS
Adjust and tighten blades and
guards.
Avoid contact with blade
teeth.
Keep fingers and hands away
from pinch points.
Keep fingers and hands away
from blade.
Wear safety glasses and/or
face shield.

Approved By:

Injury & Illness Prevention Program


Job Safety Analysis
Ras Al KhairPower Plant,Dammam

Prepare By:

Approved By:

You might also like