Professional Documents
Culture Documents
Bearing Stress Review
Bearing Stress Review
Bearing Stress Review
The lap joint shown in Fig. P-126 is fastened by four -in.-diameter rivets. Calculate
the maximum safe load P that can be applied if the shearing stress in the rivets is
limited to 14 ksi and the bearing stress in the plates is limited to 18 ksi. Assume the
applied load is uniformly distributed among the four rivets.
Safe load P,
answer
Problem 128
A W18 86 beam is riveted to a W24 117 girder by a
connection similar to that in Fig. 1-13. The diameter of the
rivets is 7/8 in., and the angles are each L4 3-1/2 3/8 in..
For each rivet, assume that the allowable stresses are = 15
ksi and b = 32 ksi. Find the allowable load on the connection.
Required:
Allowable load on the connection
Relevant data from the table (Appendix B of textbook): Properties of Wide-Flange
Sections (W shapes): U.S. Customary Units
Designation
Web thickness
W18 86
0.480 in
W24 117
0.550 in
Problem 131 Repeat Problem 130 if the rivet diameter is 22 mm and all other data
remain unchanged. - See more at: http://www.mathalino.com/reviewer/mechanicsand-strength-of-materials/solution-to-problem-131-bearingstress#sthash.UaNyjj30.dpuf
say 4 rivets
say 6 rivets
answer
Tensile stress:
answer
say 4 rivets
say 2 rivets
Compressive stress:
answer
answer