Professional Documents
Culture Documents
Reglare Faruri Ford Sau Alte Masini
Reglare Faruri Ford Sau Alte Masini
Reglare Faruri Ford Sau Alte Masini
Report An Error
General Procedures
General Equipment
Headlamp beam setting equipment
1. Park the vehicle on a level surface.
2. Ensure that the tire pressures are to specification and
that the vehicle is not overloaded.
3. Switch on the dipped beam.
4. Repeatedly actuate the headlamp levelling switch and
then set it to "0".
5. Set the measuring screen of the headlamp beam setting
equipment to the correct headlamp alignment setting.
6. Adjust the dipped beam so that the light/dark boundary
touches the horizontal line.
1 of 2
22-Aug-09 08:05
http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1110&proc-uid...
2 of 2
22-Aug-09 08:05