Professional Documents
Culture Documents
Design and Construction of Steel Chimney - Code of Practice: (First Revision)
Design and Construction of Steel Chimney - Code of Practice: (First Revision)
MECHANICAL ASPECT
( First Revision)
1 SCOPE
4 TERMINOLOGY
4.0 For the purpose of this standard termlno10BY as defined in 4.1 to 4.21 shall apply. For
definitions not covered in this part, a reference
shall be made to Part 2 of the standard.
are
4.1 ActualDraft
The suction produced at the base of a chimney
minus the drop in draft due to frictional resistanee in ftue gas passages.
Title
lS 4041 : 1987
Glossary of terms relating The speed of discharge of gases from the top
to refractory materials (first of the chimney.
revision )
4.7 Flux GISTemperature
IS 8829 : 1978 Guidelines for micrometeorological techniques in air Temperature of flue gas at the chimney outlet.
pollution studies
4.8 Forced Dr.ft
3 STATUTORY PROVISIONS
System which maintains the products of
3.1 Compliance with this code does not relieve combustion, when flown to or through it, at a
anyone from the responsibility of observing pressure above atmospheric.
provisions as may have been promulgated by 4.9 Ground Leyel CODceDtratloD
any statutory bodies and/or observing provincial
building by-laws and the civil aviation require- Concentration of air pollutant in ma/ m l in the
meats pertaining to such structures.
breathing zone.
I