Professional Documents
Culture Documents
Chiksan Weco
Chiksan Weco
Flowline Products
ufacturi
Quality
n
g
an
ISO-9001
C
Systems
er
tificatio
Contents
Chiksan Swivel Joints .................................................................. 1
Recommended service
Hydraulic control lines, mud lines, rotary line
connections, BOP lines, test lines, water lines,
offshore wellhead connections, transfer lines,
temporary flow lines, discharge lines,
auxiliary flow lines, acidizing, test lines,
cementing and circulating hoses, choke-andkill lines, and other general-service oilfield
applications.
Chiksan High-Pressure
Swivel Joint
Chiksan Swivel Joint Styles
No. 6
No. 3
Style 20
Style 30
No.4
No. 4
No. 5
Style 40
Style 50
No. 3
No. 1
No.3
No. 1
No. 5
Style 60
Style 70
No. 3
No.1
No. 2
No. 3
Style 80
Three swivels with three elbows
No.5
Style 10
Three swivels with two elbows
No.3
Low-Pressure
Swivel Joints
High-Pressure
Swivel Joints
Extra High-Pressure
Swivel Joints
Longsweep
Swivel Joints
Longsweep TripleStep
Swivel Joints
Color Code
Cold Working
Pressure, psi
Material
End
Connections
Dark Green
175
Ductile Iron
Flanged
Blue
275
Carbon Steel
Flanged
Dark Green
600
Ductile Iron
NPT
Blue
1,000
Carbon Steel
Sizes, in.
8
212
Notes
3
2,3
3
Beveled for
welding
6,000
Carbon Steel
Weco figure
602 union
Silver
6,000
Carbon Steel
Female line
pipe threads
Black
10,000
Carbon Steel
Female line
pipe threads
Olive Green
(Sour Gas)
7,500
Alloy Steel
Weco figure
1002 union
Olive Green
(Sour Gas)
10,000
Alloy Steel
Weco figure
1502 union
Olive Green
(Sour Gas)
15,000
Alloy Steel
Weco figure
2202 union
Black
10,000
Alloy Steel
Female line
pipe threads
Red
15,000
Alloy Steel
Weco figure
1502 union
Light Blue
20,000
Alloy Steel
Weco figure
2002 union
Alloy Steel
Weco figure
1502 union
15,000
1 2
1
NPT
Olive Green
(Sour Gas)
Red
1 4
1
CF
Notes
All body materials meet ASTM or AISI standards.
Consult factory for special sizes, styles, end connections, or packing units.
1.
2.
3.
4.
5.
6.
Flanged ends faced and drilled to 150 lb flange specifications unless otherwise noted.
Not available in Styles 80 or 10.
3/8- to 4-inch sizes furnished with nitrile packing and brass or stainless steel anti-extrusion ring.
6- to 12-inch sizes furnished with nitrile packing and stainless steel anti-extrusion ring.
2- and 3-inch sizes available in Styles 30 and 40. 6- to 12-inch sizes available in all Styles except Style 20.
Furnished with fluoroelastomer packing and stainless steel anti-extrusion ring. FMC does not warrant the
performance of any elastomer seal for sour gas service.
7. Power make up must be used for line pipe threaded connections to achieve rated cold working pressure.
8. 3- and 4-inch size rated at 10,000 psi cold working pressure with integral Weco 1002 union ends only.
9. 5-inch size available with threaded or beveled ends; limited to 3,000 psi cold working pressure.
10
12
1,2,3
CF
CF
CF
CF
CF
CF
CF
CF
1,3,4
3,4,5
3,9
3,7
6
6
7,8
Chiksan Models
High-Pressure Hose
One Weco union and two Style 50 or Style 10
Chiksan swivel joints with threaded ends
Recommended Service
High-pressure discharge lines, water lines,
temporary flow lines, well testing lines, and
cementing and circulating lines, and other
high-pressure applications.
Longsweep
Swivel Joints
Longsweep TripleStep
Swivel Joints
Color Code
Method of Construction
Threaded
NPS
Integral
Welded
Cold Working
Pressure, psi
Sizes, in.
1
112
Weco
fig. no.
6,000
602
Silver
6,000
602
Black
10,000
1502
7,500
1002
10,000
1502
15,000
2202
Black
10,000
1502
Black
10,000
1002
Red
15,000
1502
Light Blue
20,000
2002
Red
15,000
1502
Specially compounded
proprietary Teflon seal handles
sour gas, sour crude, and a wide
range of other corrosives
Straight-bore
Teflon seal is
mechanically and
pressure-energized
Recommended Service
Temporary and permanent flow lines, choke
and kill lines, well test lines, and other critical
service applications where flexible piping is
required to facilitate line layout and thermal
expansion.
Dynetor
Connector
2-9/16
5,000
20K201
30K251
10,000
21K20
26K251
31K301
22K20
27K25
32K301
32K25
15,000
20,000
End
Max. Working
Connection Pressure, psi
Weco
Union
6,000
Fig. 602
Fig. 602
10,000
Fig. 1502
Fig. 1502
Note: Standard Swing Joints are suitable for sour gas service.
*Teflon is a registered trademark of Dupont.
3-1/16
Dynetor Connectors
D
Recommended Service
Permanent flow lines, temporary flow lines,
well injection lines, well test lines, Xmas tree/
wellhead outlets, utility lines, manifold and
valve connections, choke and kill lines,
blowout preventer lines, offshore and marine
environments, and other non-suspension
piping applications where flanges and clamptype connectors may be used. Available in a
wide range of materials to meet application
specific demands (see Dynetor Connector
Trim Chart, page 7).
Makes up quickly
and easily with
ordinary pipe or
spanner wrenches.
Reusable, pressure-energized
metal seal (SBMS) or Teflon seal
(SBTS).
Pipe Schedule
2-1/2
40
Single-Nut
and
Double-Nut
80
160
XXS
Notes: Dynetor Connectors are rated at or above corresponding pipe ratings per ASME Section VIII, Division 2 and ANSI/ASME B31.3. Dynetor Connectors are also
available in Schedule 120 pipe in the four and six inch sizes.
Model
2-1/16
2-9/16
2,000
3,000
Single-Nut
and
Double-Nut
5,000
10,000
15,000
20,000
3-1/16
3-1/8
4-1/16
5-1/8
Note: Working pressure ratings and internal diameters correspond to those of API Specification 6A.
Material1
ASTM A36
Hub
Seal
Applications
Low-pressure, non-corrosive services
2, 5
Teflon 2, 3
Inconel 625
Nut
1
3
All applications
Dynetor Connectors are available in other materials to meet specific requirements; consult factory. 2 Standard material unless otherwise specified.
Teflon is a registered trademark of Dupont. 4 2 to 3-inch 5,000 psi models. 5 Seal pockets are nickel plated.
Figure 100
1,000 psi (69 bar) cold working pressure
Recommended service
Manifold and line connections
Features
Makes up pressure-tight with hammer
Economical, low-pressure union
Figure 200
2,000 psi (138 bar) cold working pressure
Recommended service
General-service manifolds and lines
Features
Economical, general-purpose union
Figure 206
Figure 207
Blanking union
2,000 psi (138 bar) cold working pressure
Recommended service
To seal manifold connections and protect union threads
Features
Parts interchange with Figs. 200 and 206
O-ring on blanking cap assures leak-tight seal
Can be tapped for pressure guage
Nonpressure Seal
Connection
The nonpressure seal option is especially
designed for abrasive, high-pressure services
where welded connections are undesirable.
This design provides strong, permanent end
connections without butt welding. The union
ends are shop assembled to pipe or tubing. An
epoxy thread-locking compound is used to
secure the connection. All threads are isolated
from the line fluid, and the smooth bore
assures minimum turbulence, decreases
washouts, and reduces chemical, acid, sand, or
cement build-up around the pipe ends.
Connecting threads are API round tubing
threads for extra strength. Available in
Figures 602, 1002, and 1502.
Tubing or pipe
Male sub
Seal ring
Wing nut
Female sub
Figure 211
Insulating union
2,000 psi (138 bar) cold working pressure
Recommended service
For production systems with electrolytic corrosion
problems
Features
Replaceable, laminated insulating rings eliminate
all metal-to-metal contact, provide 35 million
ohms resistance
Figure 400
4,000 psi (276 bar) cold working pressure through
4-inch sizes; 2,500 psi (172 bar) cold working
pressure, 5-inch through 12-inch sizes
Recommended service
Manifold and line connections, pump suction and
mud service
Features
2-1/2- through 12-inch sizes have O-rings for
primary seal
Available for sour gas service (see Quick
Reference Chart, page 10, for details)
Figure 1003
Misaligning union
10,000 psi (690 bar) cold working pressure through
3-inch sizes; 7,500 psi (517 bar) cold working
pressure, 4- and 5-inch sizes
Recommended service
For high pressure connections where lines cannot
be aligned
Features
Ball seat provides positive seal with up to 7-1/2
misalignment; 2-inch model up to 4
Available with threaded or butt weld ends
Available for sour gas service (see Quick
Reference Chart, page 10, for details)
Figure 1502
15,000 psi (1034 bar) cold working pressure
Recommended service
Cementing, fracturing, acidizing, testing, and
choke-and-kill lines
Features
Replaceable, lip-type seal
Available for sour gas service: 10,000 psi
(690 bar) cold working pressure
Figure 600
6,000 psi (414 bar) cold working pressure
Recommended service
Steam service, boiler connections, manifold
and line connections for production, drilling,
and well servicing
Features
Bronze seat provides primary seal; will
not rust in water services
Figure 2002
20,000 psi (1380 bar) cold working pressure
Recommended service
Cementing, fracturing, acidizing, testing, and
choke-and-kill lines
Features
Replaceable, lip-type seal
2- and 3-inch line sizes
Butt weld configurations only
Figure 602
6,000 psi (414 bar) cold working pressure
Recommended service
Manifold and line connections, and mud
service
Features
Available in detachable nut design
Replaceable, lip-type seal
Available for sour gas service (see Quick
Reference Chart, page 10, for details)
Figure 1002
10,000 psi (690 bar) cold working pressure
through 4-inch sizes; 7,500 psi (517 bar) cold
working pressure, 5- and 6-inch sizes
Recommended service
Cementing, fracturing, acidizing, testing, and
choke-and-kill lines
Features
Replaceable, lip-type seal; 5- and 6-inch
sizes have O-ring seal
Available in detachable nut design
Available for sour gas service (see Quick
Reference Chart, page 10, for details)
Figure 2202
15,000 psi (1034 bar) cold working pressure
Recommended service
Especially designed for sour gas service
Features
Meets National Association of Corrosion
Engineers Standard MR-01-75 and
American Petroleum Institute RP-14E
Heat-treated components 100 percent tested
for hardness
Fluoroelastomer seal rings
Air-O-Union
150 psi (10 bar) maximum line pressure
Recommended Service
Mud suction and return lines, low-pressure
fluid lines
Features
Inflates with rig air (200 psi maximum)
No nuts, bolts, or wrenches required
4, 6, 8, 10, 12, 13, and 16-inch sizes
Assembly
Color Key
Standard Service
1
25
114
32
112
40
2
50
212
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
Notes
Cold Working
Test
Cold Working
Test
100
1,000
1,500
NA
NA
200
2,000
3,000
NA
NA
206
2,000
3,000
NA
NA
207
2,000
3,000
NA
NA
211
2,000
3,000
NA
NA
400
2,500
3,750
2,500
3,750
400
4,000
6,000
4,000
6,000
600
6,000
9,000
NA
NA
602
6,000
9,000
6,000
9,000
1002
10,000
15,000
7,500
11,250
1003
10,000
15,000
7,500
11,250
1502
15,000
22,500
10,000
15,000
2002
20,000
30,000
NA
NA
2202
NA
NA
15,000
22,500
1,2
10
Notes: NA - Not Available
All end connections are line pipe threads unless
otherwise noted.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
1,5,6
Figure 1502 in 4-inch size available for 3 1/2-inch ID tubing, buttweld or nonpressure seal configuration only.
Figure 2002 in 3-inch size available for 3-inch ID tubing.
Figure 1003 in 5-inch size available with butt-weld ends only.
Available with butt weld ends only.
All unions for sour gas service are painted olive green, stamped
SOUR GAS or NACE MR-01-75 and have specially modified
material properties.
5- and 6-inch sizes rated at 7,500 psi CWP and 11,250 psi test;
5- and 6-inch unions for sour gas service rated at 5,000 psi CWP
and 7,500 psi test.
4- and 5-inch sizes rated at 7,500 psi CWP and 11,250 psi test;
4- and 5-inch unions for sour gas service rated at 5,000 psi CWP
and 7,500 psi test.
1,2,3,
7,13
1,3,10,
14
1,2,3,
8
9,11
11
FMC
Recommended Service
High-pressure discharge lines, auxiliary flow
lines, temporary flow lines, well testing lines,
water lines, choke-and-kill lines, and abrasive
applications.
Type of Service
Cold Working
Pressure, psi
Standard
15,000
1.75
.313
Sour Gas
10,000
1.75
.313
Standard
15,000
2.62
.438
Sour Gas
10,000
2.62
.438
FMC
Tee
connector
Block
connector
Long radius
connector
Recommended Service
High-pressure discharge lines, auxiliary flow
lines, temporary flow lines, well testing lines,
cementing and circulating lines, and other
high-pressure applications.
Streamlined disc
Triple seal: O-ring,
undersized stem
holes in seat,
corresponding flats on
seat and disc hubs
Recommended Service
Trims and materials available for any application where one-quarter turn, low-pressure
valves can be used. Models are available for
high-pressure and abrasive-service applications.
Resilient seat
Two-piece phenolic
back-up
Weco Model 12
Butterfly Valve
Weco Model 22
Butterfly Valve
12
Weco Vane-type
Pneumatic Actuators
Mounts directly to Weco butterfly
valves; 2- through 6-inch sizes
Simple construction; the vane is the
only moving part
Does not require field lubrication
Simple to repair with off-the-shelf seals
Available with special surface coatings
on request
Body Style
Neck Length
Sizes, in.
2
212
10
12
14
16
Model 12
Wafer
Short
Model 12N
Notched
Short
Model 22
Wafer
Long
Model 22L
Lug
Long
18
20
Notes
1,2,3,4
Notes:
Weco butterfly valves are equipped with nitrile seats which have an operating temperature range of 20F to 200 F. For information on other trims and
applications send for Weco butterfly valve catalog and materials selection guide.
Weco butterfly valves can be ordered with either standard or throttling handles, gear operators, chain-wheel operators, pneumatic actuators, or vane-type actuators.
Stem extensions are available in lengths to 12 feet.
1. Standard and throttling handles are not recommended for 8-inch or larger valves.
2. Standard and throttling handles are not available for 14-inch and larger sizes.
3. 14- to 24-inch sizes limited to 150 psi (10 bar) working pressure, available with gear or chain-wheel operators only.
4. 14- and 16-inch sizes are available in long neck configurations only.
24
1,3
Plug cap
Detent spring
Body cap
Recommended Service
Model DR 50
Model DR 100
Model DR 100
Model DR 150 (sour gas)
Model DR 150
Model DR 150
Model ULT 150
Model ULT 150 (sour gas)
Model DR 200 (sour gas)
Model DR 200
Cold Working
Pressure
5,000 psi
(345 bar)
10,000 psi
(690 bar)
10,000 psi
(690 bar)
10,000 psi
(690 bar)
15,000 psi
(1034 bar)
15,000 psi
(1034 bar)
15,000 psi
(1034 bar)
10,000 psi
(690 bar)
15,000 psi
(1034 bar)
20,000 psi
(1380 bar)
Sizes, (in./mm)
End Connections
1
25
Threaded or EUE
1x2
25 x 50
112
40
Threaded
Integral Weco unions
Figure 1502
Integral Weco unions
Figure 1502
2
50
212
65
3
80
Threaded
NOTE: Valves for sour gas service meet National Association of Corrosion Engineers Standard MR-01-75 and
API Standard RP-14E. Body Material: Alloy Steel
14
4
100
Chiksan Nonspin
Mud Mixing Guns
2,000 psi (138 bar) cold working pressure;
2-inch size.
Chiksan Spinner
Mud Mixing Guns
2,000 psi (138 bar) cold working pressure;
2-inch size.
Chiksan Bottom-Type
Mud Mixing Guns
2,000 psi (138 bar) cold working pressure;
2-inch size (consult factory for other sizes
and pressures).
Bottom-type, 2-in.
Spinner-type
Nonspin-type
Bottom-type, 3-in.
Forged body
Recommended Service
High-pressure well servicing lines, fracturing
lines, testing lines, cementing and circulating
lines, and other well service and stimulation
applications.
Stainless steel
angled seat
Abrasion-resistant
coated flapper
Weco wing union end
connection
FMC Manifolds
FMC
Recommended Service
High-pressure flowback, choke-and-kill, well
testing, production, and well servicing
applications.
Recommended Service
High-pressure well servicing lines, fracturing
lines, cementing and circulating lines, and
other well service and stimulation applications.
16
can not anticipate all of the situations a user may encounter while installing and using FMC products. Therefore, the user of
FMC products MUST know and follow all applicable industry specifications on the safe installation and use of these products. Refer to FMC
product catalogs, product brochures and installation, operating and maintenance manuals for additional product safety information or contact
FMC at 800/772-8582.
WARNINGS
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH!
1.
Do not mix or assemble components, parts or end connections with different pressure ratings.
Mismatched parts may fail under pressure.
2.
Do not use or substitute non FMC components or parts in FMC products and assemblies.
3.
4.
5.
Complete and proper make-up of components and connections is required to attain rated working pressure.
6.
Do not use severely worn, eroded or corroded products. Contact FMC for more information on how to
identify the limits of erosion and corrosion.
7.
Follow safe practices when using products in overhead applications. Products not properly secured
could fall.
8.
Select only appropriate product and materials for the intended service:
Do not expose standard service products to sour gas fluids. (Refer to NACE MR-0175.)
Do not interchange sour gas components with standard service components.
Use appropriate safety precautions when working with ferrous products in below freezing temperatures.
Freezing temperatures lower the impact strength of ferrous materials.
9.
Follow manufacturers instructions and Material Safety Data Sheet directions when using solvents.
10. Make certain that personnel and facilities are protected from residual hazardous fluids before disassembly
of any product.
11. If any leakage is detected from FMC products, take them from service immediately to prevent potential
damage and personal injury.
SAFETY INSTRUCTIONS
The applications of FMC products are in working environments where general personnel safety procedures and policies MUST be
followed. Always use appropriate protective equipment in high pressure, extreme temperature or severe service applications.
FMC Corporation
Fluid Control Division
Fluid Control Headquarters
FMC Fluid Control Division
6677 North Gessner Road
Houston, Texas 77040
Phone: 713/510-6800
Fax: 713/510-6803
E-mail: fluid_control@fmc.com
http://www.fmc.com/Eteg/
Manufacturing Facility
FMC Fluid Control Division
2825 West Washington
P.O. Box 1377
Stephenville, Texas 76401
Phone: 254/968-2181
Toll Free: 1-800-772-8582 (U.S.A.)
Fax: 254/968-5020
Louisiana
FMC Fluid Control Division
130 St. Nazaire Road
Box 51709
Broussard, Louisiana 70518
Phone: 318/837-9263
Fax: 318/837-5844
Rocky Mountains
FMC Fluid Control Division
1675 Broadway, Suite 1800
Denver, Colorado 80202
Phone: 303/623-4622
Fax: 303/623-7347
Alaska
FMC Fluid Control Division
700 W. International Airport Road
Building A-1
Anchorage, Alaska 99518
Phone: 907/563-3990
Fax: 907/563-5810
Scotland
FMC Corporation (U.K.) Ltd.
Wellington Circle
Aberdeen AB12 3JG
Scotland
Phone: (44) 1224/898-555
Fax: (44) 1224/249-460
The Netherlands
FMC Fluid Control (Nederland) B.V.
Europalaan 16
Box 757
2400 AT, Alphen a/d Rijn
The Netherlands
Phone: (31) 172/470-024
Fax: (31) 172/470-026
France
FMC Europe S.A.
Z.I. Molina LaChazotte
810 Rue George Sand
42350 La Talaudiere, France
Phone: (33) 4/7747-5015
Fax: (33) 4/7747-5014
Singapore
FMC Southeast Asia Pte. Ltd.
149 Gul Circle
Singapore 629605
Phone: (65) 862-3659
Fax: (65) 861-8251
United Arab Emirates
FMC International S.A.
Al Moosa Tower, 17th Floor
Box 3228
Dubai, United Arab Emirates
Phone: (971) 4/310-948
Fax: (971) 4/310-950
Venezuela
FMC Fluid Control de Venezuela, S.A.
Avenida Intercomunal
Frente Carretera L
Los Morochas, Etado Zulia
Venezuela
Phone: (58) 65/26901
Fax: (58) 65/23406
To:
From:
NAME
TITLE
STREET
CITY
STATE
ZIP
COUNTRY
PHONE
FAX
This 43rd(1998-99) Edition of COMPOSITE CATALOG is published by World Oil A Gulf Publishing Company Publication P. O. Box 2608, Houston TX, 77252-2608, U.S.A.