Origami - 3-D Hexagon Ornament Diagrams

You might also like

Download as pdf
Download as pdf
You are on page 1of 3
Lev Hexahedron Ornament A variation on Molly Kahn's Hexahedron. thy Mogan Hicks (USA), Several folders have discovered this variation; | first loarnodit from Megan Hicks. Intermediate @ © 1, White side up, fold « jhalf in both directio jonally in Fold upword on the existing creawe Hd Oeningaini and unfold Ahexagon is a 2-dimensional form with six edges; a hexahedron is 3-dimensional and has six faces. This easy modular is made from three squares, each approximately 3 inches, ~ 2, Fold the bottom earner to the center, A, Turn over ay Arn 6, Foldin half, and unfold. 6. Fold the bottom corners up to the top comer. (x3) 7. Half unfold the triangular flaps 8. This js the completed unit—fold formed at step 6, and reinforce three units the central Valley Fold. Nn 9. Assembly; Orient two units as 10. Insert the points on unit 2 into shown, Insert the points on unit 1 the pockets on unit 3. into the pockets on unit 2. Slide them in halfway for now. Ornagami 65 Hexahedron Ornament (continued) M. Shaping the model 3-dimensionally, 12. Before closing the model, insert insert the points on unit 3 into the a decorative cord either at a wide pockets on unit 1, or narrow point, The card should have a knot or bead on the end that is larger than the opening after the madel is closed 18. Close the Hexahedron by sliding 14. The hanging Hexahedron all of the points as deeply into the Ornament. @ pockets as possible, Af Variations Use duo-colored paper, and make Folded from 2-inch squares, this the fold at step 2a Mountain Fold, model makes lovely origami earring, This will give you a 6-colar model, 66 Ornagami

You might also like