Professional Documents
Culture Documents
Design of A Pascal Press
Design of A Pascal Press
The project is an energy transfer process from a steam generator to form electricity.
For the project, we will build a metal steam generator, which will be heated to
produce water steam at some pressure that will be measured with a manometer
and controlled with valves. This steam will be transferred to a rotating wheel
with a hose to produce rotational kinetic energy, which it then will move to a
DC motor 6 to 12 volts. This will generate movement inside it to eventually
transfer electric energy to a LED (necesarilly it not has to be one LED, it willl
be many LEDs or maybe a much bigger source of light).
In a more general aspect, our interest in this project is to comprise that this
type of system can be very useful on a large scale only with the generation
of steam pressure to produce electrical, mechanical energy and other types of
1
Figure 1: The system: consisting on the wheel that will move with rotational
kinetic energy, at the middle we have the 9V - 12V DC motor and nally it is
conected to a led.