CDT 90 en 0711

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Dehumidification

CDT 90
Function
The CDT 90 works in accordance with the condensation principle. A fan
draws the humid air into the dehumidifier and through an evaporator coil.
When passing through the evaporator the air is cooled down to below its
dew point temperature, and its content of water vapour is condensed into
water, which falls into the drip tray and then is led to the drain. The cold,
dry air is then passed over the condenser coil where it is re-heated, before
leaving the unit at a temperature which is approx. 5C higher than at the
inlet.
Features
Light, mobile dehumidifier with a good weight distribution
Cabinet fabricated from hot dipped galvanized sheet steel coated
with enamel powder paint
250 mm wheels ensure easy transporting up and down stairs
Two handles for easy transportation and lifting
A hygrostat can be connected to the dehumidifier (accessory)
Plastic bumpers protect doors and panels from unnecessary knocks
Rotary compressor
SERVICE/Handling
Water drain
Fitted with a drain outlet for connection to a water hose
Filter
Easily removable for cleaning by opening the front grille
Control Board
1. On-off switch
2. Hours run meter
3. Indicator for normal operation (green lamp)
4. Indicator for fault (red lamp)

02.2011 - With reservation for changes and misprints.

Control board

Defrosting
Active, demand-controlled defrosting which is activated through a tem
perature sensor on the evaporator. Defrosting is done by means of hot
refrigerant being fed through the evaporator.

8.13

Dehumidification

Technical data
Operating range humidity
Operating range temperature
Air volume
Power supply
Max. ampere consumption
Max. power consumption
Refrigerant
Sound level (at 1 metre)
Weight
Colour - wheel cap
Colour - front grille
Colour - control board and bumpers
Protection class
Size of wheel
Filter

CDT 90
40 - 100
3 - 30
1000
230
7,2
1,65
R 407c
62
62
7015
7044
9005
IP X4
250
PPI 15

% RH
C
m/h
V/50 Hz
A
kW
dB(A)
kg
RAL
RAL
RAL
mm

MaterialS
Wheel
Wheel cap
Bumpers
Control board

PP
PP
PP
ABS

Capacity Curves
C
30

40% RH

60% RH

80% RH

25

20

15

10

l/h

0
0

0,50

1,00

1,50

2,00

2,50

3,00

3,50

4,00

4,50

l/hour

984

Specific energy consumption


0,42 kWh/l at 30C & 80% RH
0,71 kWh/l at 20C & 60% RH
Dimensions
Accessories
Hygrostat
Dual voltage kit
(see separate data sheet for accessories
page 8.15)

610

All dimensions are in mm.

650
650

8.14

02.2011 - With reservation for changes and misprints.

900

900

984

984

650

You might also like