Professional Documents
Culture Documents
Adash A4900 Vibrio MP
Adash A4900 Vibrio MP
t detection
on site; basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and
lubrication assessment and alarm setting in accordance with ISO 10816-3 for machine condition monitoring.
Measured vibration overall values are optionally displayed either in metric or imperial mode - velocity (RMS & Peak),
acceleration (RMS & Peak) and displacement (RMS, Peak, Peak-Peak).
Basic vibro-diagnostics measurements can be viewed with FFT spectrum, time signal and frequency bands. Other built-in
features includes the IR non-contact temperature sensor, LED stroboscope, stethoscope and LED torchlight.
The Vibrio M is equipped with 4MB of memory for data storage. Data memory allows you to perform off-route and route
measurements. The professional software DDS 2014 for Vibrio M can be downloaded from the Adash website free of
charge. The instrument has additional option for measuring from proximity sensor.
The instrument is supplied in professional carrying case includes accelerometer, flat-type magnet, coiled cable, measuring
tip/probe, professional headphone, leather shoulder case, USB cable, binder to BNC cable, 2 AA batteries, CD manual and
calibration certificate.
A4900 VIBRIO MP
VIBRATION METER, DATA ANALYSER, DATA
COLLECTOR
ISO alarms
ISO standard
Adash standard
True Peak
Displacement
Misalignment
Bearing faults
Machine OK
Unbalance
Looseness
Alert Messages
Sensor connection
Offline
measurement
Route
measurement
Proximity Option for proximity sensor
Prox mode
DC offset
View
measurement
Time waveform
Value overload
Input overload
FFT spectrum
Time signal
Frequency bands
SIMPLE TO USE
Additional Features
ISO 10816-3 chart
Professional transport
case
IR non-contact
temperature
LED torchlight
LED stroboscope
Units selection
Stethoscope
Code: ARS-4900MP-P
INDUSTRIAL DESIGN
Heavy duty aluminium case
2AA rechargeable or AA
alkaline batteries
8 hours of operation
Pub: ARS-Nov-2015