Professional Documents
Culture Documents
3form Supports
3form Supports
Project Profile:
Cascade Periodontics
Client: Kathleen Reuter
w w w . c o l l a b r i s h . c o m
Miriah ODair MiriahODair@Gmail.com 541.788.3841
Project Address:
19797 Village Office Ct.
Bend, Oregon
Project Architect:
Steel and Associates
Jeff Wellman
Project Contractor:
Chris Harmening
Harmony Contracting
Phone: (503) 487-7476
Email:
Harmonycontracting@gmail.com
1.
COUNTERSINK HEAD OF KNOB
SCREW INTO 1X1 WITH THE SCREW
HEAD ON THE WALL SIDE OF THE 1X1.
ADD RUBBER WASHER TO THE KNOB
SIDE OF THE SCREW. REPEAT FOR ALL
KNOB PLACEMENTS.
WALL
WALL
KNOB SCREW
KNOB HARDWARE
AS 3FORM
ATTACHMENT
3FORM
MATERIAL
MOUNTED
TO 1X1
WALL
WALL
MOUNTING
SCREW
WALL
KNOB
RUBBER WASHERS
h1p://www.myknobs.com/lew19400.html
Wall
Wall
knob
3 form
post
Wall
Cut Edge
All of the cut panels were leV with
rough cut edges. This is ne in the
cabinet panel where the edges are
hidden but not where the edges are
hanging exposed.
Please use the material fabricaQon
instrucQons and sand the cut edges
to match the factory edges.
Also in the tradi>on of quality
craCsmanship all of the support
connec>ons as a form of wood trim
should be caulked to the wall to
eliminate gaps between the wall and
trim. The trim and the sealed gaps
should be painted to match the wall.
Factory Edge