We are going to attach clear tubes to an arrowhead jug. We will then use a pull tab in order to release some of the contents into the tube. The tube will have small holes in it to show the liquid absorbing into the rest of the body (sponges) All of these pieces will be attach to a board in order to support it.
We are going to attach clear tubes to an arrowhead jug. We will then use a pull tab in order to release some of the contents into the tube. The tube will have small holes in it to show the liquid absorbing into the rest of the body (sponges) All of these pieces will be attach to a board in order to support it.
We are going to attach clear tubes to an arrowhead jug. We will then use a pull tab in order to release some of the contents into the tube. The tube will have small holes in it to show the liquid absorbing into the rest of the body (sponges) All of these pieces will be attach to a board in order to support it.
We are going to attach clear tubes to an arrowhead jug.
We are going to put blended up food
into our jug which will already contain hydrochloric acid, the acid used in the stomach to digest food. We will then use a pull tab in order to release some of the contents into the tube. The tube will have small holes in it to show the liquid absorbing into the rest of the body (sponges). Most of the liquid will be filtered out until just the solid remains and it drops into the bowl that is waiting at the bottom. All of these pieces will be attach to a board in order to support it. Materials 3 feet of 1.5 inch diameter clear tubing I liter plastic water jug duct tape foam/sponges blender food hydrochloric acid Plastic Wrap 4ft x 2ft wooden board funnel 1 ft. in length, 6 in. in width, and 1 inch in depth piece of wood pins to support curves in the tubes