Professional Documents
Culture Documents
ME202 Tut 2016 01
ME202 Tut 2016 01
ME202 Tut 2016 01
Wall thickness = 6 mm
2t
A
3. Calculate the angle of twist per unit length, shear stress in the outer walls and
shear stress in the segment CA of the thin-walled section shown. Ellipse dimensions
(measured along the centerline of the outer wall): Major axis=2a and minor axis=2b.
Applied torque=T. Use G as modulus of rigidity.
4. If a stiffener DE of thickness t is added
in the above segmented elliptic section
(Prob. 3) find the change in the
highest shear stress and the
D
torque capacity.
2t
A