Professional Documents
Culture Documents
DP-1515 PM
DP-1515 PM
DP-1515P
[ Version 1.2 ]
Please file and use this supplement manual together with the DP-1520P/1820P/1820E Parts Manual, Order
No. MGCS050606CO.
WARNING
This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
General Annotations
1. Panasonic Digital Document Company and other Panasonic Sales Companies reserve
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3.
4. In New Parts column, "N" indicates part is used only in DP-1515P model, "C" indicates
part is used in previous models.
5. In Remarks column, "PM" indicates Preventive Maintenance Part".
6. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependant on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This Unit" which includes other itemized parts is provided as Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a
mark following
the PCB part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 F (30 - 40 C) higher. Please use a soldering iron with temperature
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
Pb free solder will tend to splash when heated too high (about 1100 F/600 C).
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL: http://www.senju-m.co.jp) is recommended when repairing PbF PCBs.
General Annotations
9. Important Notice
(especially in those countries belonging to the European Union):
This product is fully compliant with the national laws transposed from the EU Directive
on the restriction of the use of certain hazardous substances (RoHS) in electrical and
electronic equipment, effective 1st July 2006 in the EU countries.
In order for the product to comply with the RoHS Directive, the six particular substances
(lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and
polybrominated diphenyl ethers) have been either totally eliminated or limited to the
concentration level below maximum allowed. Consequently spare parts have been
changed to RoHS-compliant parts where applicable.
Due to spare parts application of RoHS legislation, non-compliant spare parts cannot be
used to repair compliant products put on the EU market on or after 1st July 2006.
Please therefore make sure to order and use RoHS-compliant spare parts listed in this
manual.
The contents of this Parts Manual and the Specifications are subject to change
without notice. Panasonic Communications Co., Ltd. reserves the right to make
improvements in the product design without reservation and without notice.
Published in Japan.
Precautions
For Your Safety
To prevent severe injury and loss of life, read this section carefully before servicing the Panasonic
machine to ensure proper, and safe operation of your machine.
Please ensure that the machine is installed near a wall outlet, and is easily accessible.
This section explains the Warnings and Cautions used in the machine and/or this manual.
WARNING: Denotes a potential hazard that could result in serious injury or death.
CAUTION: Denotes hazards that could result in minor injury or damage to the machine.
This section also explains the Warnings and Cautions used in the machine and/or this manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
WARNING
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and eventually
cause fire if left unattended over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord is
required, always use a properly rated cord.
120 V/15 A or AC 220 - 240V/10 A
If you use a cord with an unspecified current rating, it may be underrated, and the machine,
or plug may emit smoke, orbecome hot to the touch.
Do not attempt to repair, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is damaged, or insulated wires are exposed, contact the authorized
Panasonic dealer for a replacement. Using a damaged cord can cause fire or electric
shocks.
Stop operation immediately if your machine emits smoke, excessive heat, unusual noise, or
abnormal smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact the authorized Panasonic
.
dealer.
Do not disconnect or reconnect the machine while the power switch is in the On position.
Disconnecting a live connector can cause arcing, consequently deforming the plug and
cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire, or an electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insulation
can cause electric shocks, current leakage or fire.
Be sure to switch Off, and unplug the machine before accessing the interior of the machine
for cleaning, maintenance or fault clearance. Access to a live machine's interior can cause
an electric shock.
Once a month, unplug the machine and check the power cord for the following. If you notice any unusual
condition, contact your authorized Panasonic
.
dealer
The power cord is plugged firmly into the receptacle.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause
severe burns.
Do not place any liquid container such as a vase, or coffee cup on the machine. Spilt water can cause fire or
shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the
machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine immediately.
Operating a debris-contaminated machine can cause fire or electric shock.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification can cause
smoke or fire.
Consumable Safeguards
Never dispose of toner, toner cartridge, or a waste toner container into an open flame. Toner remaining in the
cartridge/bottle can cause an explosion, burns and/or injuries.
Keep button batteries/stamp out of the reach of children to prevent chocking or poisoning. If a button
battery/verification stamp is swallowed accidentally, get medical treatment immediately.
CAUTION
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that
may catch fire.
Do not place the machine in a hot, humid, dusty, or poorly ventilated environment. Prolonged exposure to
these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand the weight of the machine.
Refer to the Specifications section for the weight of the machine.
If tilted, the machine may tip-over and cause injuries.
When relocating the machine, remove the toner and/or developer, and pack the machine
e with proper
packing materials for shipping.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the
power cord attached, it can cause damage to the cord which could result in fire or electric shock.
CAUTION
Do not place a magnet near the safety switch of the machine. A magnet can activate the
machine accidentally resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick document, do not use excessive force to press it against the
document glass. The glass may break and cause injuries.
Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet
of paper is wrapped around the heat roller, do not try to remove it when it is hot, to avoid
injuries or burns. Switch Off the machine immediately, and wait until it cools down.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When
a paper jam occurs, they can cause a short circuit and fire.
Do not place any heavy object on the machine. An off-balance machine can tip-over or
the heavy object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to
minimize the ozone density in the air.
When copying with the document cover open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue or damage.
Pull out paper trays slowly to prevent injuries.
When removing jammed paper, make sure that no pieces of torn paper are left in the
machine. A piece of paper remaining in the machine can cause fire. If a sheet of paper is
wrapped around the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can cause injuries or
burns. Switch Off the machine immediately, and wait until it cools down.
If accessing the inner components of the machine to clear misfed paper, etc., exercise
care not to touch heated areas, or you may get burned.
Consumable Safeguards
WARNING
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge can
cause an explosion and you can get burnt.
Never throw toner, a waste toner container, or a toner cartridge into an open flame. It
can cause an explosion and you can get burnt.
Keep button batteries out of the reach of children. If a button battery is swallowed
accidentally, get medical treatment immediately.
CAUTION
Never heat the OPC Drum, or scratch its surface. A heated, or scratched drum can be
hazardous to your health.
Do not mix new and old batteries at the same time, or batteries can burst or leak,
causing fire or injuries.
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
Table of Contents
Exploded View & Parts List .................... 9
1.1.
1.2.
Cover Assembly......................................10
1.3.
1.4.
1.5.
Electrical Parts........................................18
1.6.
Hopper Unit.............................................20
1.7.
Drum Unit................................................22
1.8.
1.9.
PC Boards/Harnesses ............................26
memo
DP-1515P
Destination Codes
Code
Destination
PB, PB2 Kuwait; Egypt; Bahrain; Oman
PBE
UK
PK
China
Code
PME
PP, PP2
PU, PU2
PY, PY2
PPE
PS
Destination
Italy
Russia; Ukraina; Moldova
Mexico
Saudi Arabia; UAE; Jordan
East Euro
Turky
9
Ver. 1.2
SEPT 2006
1.2.
Safety
Mark
DP-1515P
Cover Assembly
Ref.
No.
107
Part Number
DZJE001281
Part Name
Plate, Rear Document
New
Parts
N
PJZNF3060PB
109
Remarks
Destination
All
PB, PM, PP, PY,
PS, PB2, PBE,
PM2, PME, PP2,
PY2, PPE
PK
PU, PU2
10
Ver. 1.2
SEPT 2006
DP-1515P
A
107
X2
103
106
1
110
116
109
Y3
117
105
X2
132
2832
104
W9
X2
Y3
2
S6
114
X8
113
Y3
112
102
S6
101
Y3
129
Q8
125
2841
133
128
126
Y3
127
124
2910
X8
2841
Q8
131
123
122
120
121
X8
11
Ver. 1.2
SEPT 2006
DP-1515P
Safety
Mark
Ref.
No.
201
240
Part Number
DZMA004795
PJKPC0043Z
Part Name
Cover, Front Door
Sheet Cover LAN I/F
New
Parts
N
N
Remarks
Destination
All
All
12
Ver. 1.2
SEPT 2006
DP-1515P
A
238
Y3
Y11
Y2
236
237
Y2
239
217
216
240
220
Q8
224
S6
952
3
233
S6
226
218
232
Y3
938
219
211
227
Y3
214
215
X8
229
228
Y1
213
204
208
207
206
210
209
6
203
Y3
X8
205
7
202
201
13
Ver. 1.2
SEPT 2006
1.3.
Safety
Mark
DP-1515P
Scanner Unit
Ref.
No.
427
Part Number
DZHP010628R
PJZNF3100PK
Part Name
CCD Unit
New
Parts
N
Remarks
Destination
All
14
Ver. 1.2
SEPT 2006
DP-1515P
A
Y3
420
423
421
411
Y3
420
420
Y3
J6
Y3
426
412
421
422
308
X8
419
413
Y3
420
407
Y3
408
410
412
408
X8
418
417
415
414
408
308
J6
409
408
416
2811
X4
427
409
2829
Y3
404
425
406
410
Y2
2830
424
Y3
Y3
429
403
405
430
428
6
Y3
402
425
404
424
2834
401
15
Ver. 1.2
SEPT 2006
1.4.
Safety
Mark
DP-1515P
Part Number
PJGPC0046Y
PJGPC0046Z
DZJE001276
502
DZJE001274
503 DZJE001275
510 DZKB000948
515 DZNA001142
537 DZJE001273
PJYPF3060PU
538
PJYPF3060PK
2904 DZEC103987R
2905 DZEC103988R
2906 DZEC103989R
501
Part Name
New
Parts
Window, Panel
Cover, Panel
Holder, Battery
Keys, Numerical
Lamp, Active
Cover, Aperture
N
N
N
N
PC Board, PNL1
PC Board, PNL2
PC Board, PNL3
N
N
N
Remarks
Destination
PK
Except PK
PK
Except PK
All
All
All
All
Except PK
PK
All
All
All
16
Ver. 1.2
SEPT 2006
DP-1515P
A
501
1
537
538
539
507
2
502
S6
509
510
2916
515
2917
521
Q8
522
516
503
X8
2923
2924
518
681
517
519
2906
2905
520
X8
681
2904
6
X8
681
7
529
530
17
Ver. 1.2
SEPT 2006
1.5.
Safety
Mark
DP-1515P
Electrical Parts
Ref.
No.
Part Number
Part Name
New
Parts
Remarks
LPA3612F-R
829
LSU Unit
LPA3612F-BR
Depends on
Destination
2802 DZEC104001R
2801
Destination
PC Board, SC
PC Board, SPC
All
18
Ver. 1.2
SEPT 2006
DP-1515P
A
A
B
B
C
C
D
D
E
E
X3
X3
11
801
801
Y3
Y3
680
680
2901
2901
Y3
Y3
802
802
830
830
940
940
X3
X3
22
937
937
Y3
Y3
819
819
939
939
941
941
810
810
Y4
Y4
825
825
820
820
3128
3128
828
828
815
815
33
Y3
Y3
X4
816
816 X4
2804
2804
Y3
Y3
Y6
Y6
826
826
823
823
Y3
Y3
809
809
824
824
X3
X3
44
Y4
Y4
681
681
803
803
X3
X3
829
829
3116
3116
2801
2801
806
806
Y3
Y3
Y3
Y3
55
814
814
Y3
Y3
808
808
813
813
Y3
Y3
Y3
Y3
806
806
807
807
812
812
818
818
Y3
Y3
Y3
Y3
Y3
Y3
66
3116
3116
681
681
2802
2802
77
817
817
Y3
Y3
680
680
681
681
2806
2806
88
19
Ver. 1.2
SEPT 2006
1.6.
Safety
Mark
DP-1515P
Hopper Unit
Ref.
No.
Part Number
Part Name
DZJE001180
1208
New
Parts
Remarks
C
Holder, Rear Bottle
DZJE001280
DQ-TU10J-PB
1216
DZJA001422
1217
Hopper Unit
PJZYF2122PK
PM
(Available as
Sales Item)
Destination
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
Note:
Common Part as DP-1820E/1820P/1520P.
20
Ver. 1.2
SEPT 2006
DP-1515P
A
1216
2
1208
X6
1209
X9
1213
1212
1203
1202
1217
1201
21
Ver. 1.2
SEPT 2006
1.7.
Safety
Mark
DP-1515P
Drum Unit
Ref.
No.
Part Number
Part Name
DQ-H60J-PU
1403
New
Parts
C
Drum, OPC
DQ-HJ60K-PK
1448 PJZYF212H00
1449 PJZYF212G00
1452 PJMZC0003Z
Remarks
N
Assembly, OPC Frame
Assembly, Process Unit
Sheet
N
N
N
PM
(Available as
Sales Item)
Destination
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
All
All
All
Note:
Common Part as DP-1820E/1820P/1520P.
22
Ver. 1.2
SEPT 2006
DP-1515P
A
1448
1436
1
1440
1437
1438
1441
1433
1429
1440
1444
1439 1455
1443
1401
1428
1419
1418
1431
1432
1430
1454
1417
1434
1419
2837
1418
1451 1427
1435
1447
1416
1420
2807
1442
1404
1402
2836
1405
5
1450
1452
1421
1426
1409
1425
X9
1412
1445
6
1403
1415
1414
1424
1407
X3
1411
1422
1408
1410
1412
1414
1413
X3
1449
8
23
Ver. 1.2
SEPT 2006
1.8.
Safety
Mark
DP-1515P
Drive Unit
Ref.
No.
Part Number
Part Name
DZLN000007
1535
New
Parts
C
Joint, OPC
PJDIC0014Z
DZTY000311
1540
Remarks
Destination
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
PBE, PME, PS
(See Note)
PB, PK, PM, PP,
PU, PY, PPE,
PB2, PK, PM2,
PP2, PU2, PY2
Note:
Common Part as DP-1820E/1820P/1520P.
24
Ver. 1.2
SEPT 2006
DP-1515P
A
131
2822
1540
1511
1503
1509
1518
1544
1506
1507
Y3
X8
2822
1505
1504
X8
1508
1501
Y9
1517
1539
1522
1506
1510
2822
1523
1502
3
1503
1555
1524
1528
1525
1514
1548
1538
Y3
1529
1553
1525
1524
J8
1549
1534
1551
1533
1537
1552 K5
1536
1530
1527
1515
1526
1519
1546
1535
1547
1531
1532
1550
1516
1521
1520
X8
5
Y3
1542
680
681
680
1545
7
Y3
Y3
1513
1541
Y3
934
1554
8
25
Ver. 1.2
SEPT 2006
1.9.
Safety
Mark
DP-1515P
PC Boards/Harnesses
Ref.
No.
Part Number
Part Name
New
Parts
PJWPF3060PU
DZEC103997R
PJWPF3060PB
DZEC103998R
PJWPF3060PP
2801 DZEC103999R
PJWPF3060PK
DZEC104000R
PJWPF3060PM
DZEC104010R
PJWPF3060PS
2802 DZEC104001R
PC Board, SPC
2814 DZFP002105
Harness, LSU 2
2826 DZFP002104
Harness, LSU 1
Remarks
Destination
PU, PU2
PB, PY, PB2,
PBE, PY2
PC Board, SC
26
Ver. 1.2
SEPT 2006
DP-1515P
A
2811
2810
SC ( 2801 )
CN52
CN55
ADF (2846)
CN53
2816
2848
2827
CN51
CN66
CN22
CN57
CN21
2815
CN30
CN25
CN28
2849
CN29 CN27
2843 2814
2851
SPC ( 2802 )
2849
4
2817
2829
CN656
2828
2850
CN657
CN721
2818
CN720
2819
RLB (2804)
CN655
2831
CN173
2827
2861
2815
CN726
CN703
2816
CN717
2826
CN701
CN709
2820
CN723
2818
CN712
2821
CN715
2821
CN722
CN706
CN172
2830
CN171
2833
2822
CN727
CN707
CN719
CN650
2820
CN702 CN708
2825
3138
2815
2823
27
Ver. 1.2
SEPT 2006
DP-1515P
Safety
Mark
Ref.
Part Number
No.
2904 DZEC103987R
2905 DZEC103988R
2906 DZEC103989R
New
Parts
N
N
N
Part Name
PC Board, PNL1
PC Board, PNL2
PC Board, PNL3
Remarks
Destination
All
All
All
28
Ver. 1.2
SEPT 2006
DP-1515P
A
PS (2901)
2911
2912
1
CN502 CN504
2912
CN501
2815
CN500
2
CN11
2815
CN12
CN10
2815
CN1
CN5
CN2
2815
3
2913
2833
CN3
2914
4
2925
PNL2 ( 2905 )
2923
PNL1 ( 2904 )
2810
2916
2924
519
CN220
CN232
CN233
2917
CN223
CN234
CN230
CN231
2923
2924
2917
CN253
PNL3 ( 2906 )
2916
7
CN252
29
Ver. 1.2
SEPT 2006
DP-1515P
Ref.
Part Number
No.
3405 PJPGC0392Z
3409 PJQRC0111Z
Box
Installation Instructions
3418 PJQMC0475Z
Operating Instructions
PK
3422 PJQXC0069Z
Sheet, Appendix
PK
Part Name
New
Parts
N
N
Remarks
Destination
PK
PK
30
Ver. 1.2
SEPT 2006
DP-1515P
A
3405
3417
3421
3402
3
3409
3420
3418
3411
3411
3422
3406
3411
3411
3419
5
3412
3419
3413
3414
31
Ver. 1.2
SEPT 2006
DP-1515P
Ref.
No.
3405
Part Number
PJPGC0391Z
Part Name
New
Parts
Box
3409 PJQRC0112Z
Installation Instructions
3410 PJQQC0050Z
Quick Guide
3418 PJQMC0474Z
PJQMC0476Z
PJQMC0688Z
PJQMC0689Z
Operating Instructions
3422 PJQXC0069Z
Sheet, Appendix
PJPGC0393Z
PJQMC0473Z
Remarks
Destination
PB, PM, PP, PY,
PS, PB2, PBE,
PM2, PME, PP2,
PY2, PPE
PU, PU2
PB, PM, PP, PU,
PY, PS, PB2,
PBE, PM2, PME,
PP2, PU2, PY2,
PPE
PB, PY, PB2,
PY2
PB, PM, PY,
PB2, PBE, PM2,
PY2, PPE
PU, PU2
PP, PP2
PME
PS
PB, PM, PP, PU,
PY, PS, PB2,
PBE, PM2, PME,
PP2, PU2, PY2,
PPE
32
Ver. 1.2
SEPT 2006
DP-1515P
A
3417
3421
3409
3410
3420
3418
3411
3422
3405
4
3406
3411
5
3411
3412
3411
3413
3414
33
Ver. 1.2
SEPT 2006
DZZSM00319