Professional Documents
Culture Documents
Coatings Word February 2016
Coatings Word February 2016
PRESIDENT
Rodman J. Zilenziger, Jr. rzilenziger@rodmanmedia.com
EXECUTIVEVICEPRESIDENT
Matthew J. Montgomery mmontgomery@rodmanmedia.com
GROUPPUBLISHER / ADVERTISINGSALES
Dale Pritchett dpritchett@rodmanmedia.com
ADVERTISING SALES (U.S.)
Kim Clement Rafferty krafferty@rodmanmedia.com
Donna Campbell dcampbell@rodmanmedia.com
ADVERTISING SALES (Europe)
Ria Van den Bogaert, BVBA Vandenbo
Karmelietenstraat 24 C, Box 56, 1000, Brussels, Belgium
Tel.: +32 2 569 8905 Fax: +32 2 569 8906
Mobile: +32 497 05 0754 ria@rodmanmedia.com
ADVERTISING SALES (Hong Kong, Taiwan & China)
Ringier Trade Publishing Ltd
401-405 4/F New Victory House
93-103 Wing Lok Street, Sheung Wan, Hong Kong
(852) 2369 8788 Fax:(852) 2869 5919
mchhay@ringier.com.hk
CLASSIFIEDADVERTISING SALES
Patty Ivanov 631-642-2048; Fax 631-473-5694
pivanov@rodmanmedia.com
PRODUCTIONMANAGER
Patricia Hilla philla@rodmanmedia.com
AUDIENCE DEVELOPMENT MANAGER
Joe DiMaulo jdimaulo@rodmanmedia.com
CIRCULATION MANAGER
Richard DeVoto rdevoto@rodmanmedia.com
ONLINE DIRECTOR
Paul Simansky psimansky@rodmanmedia.com
Coatings World (ISSN 152-711-29) is published monthly by Rodman Media Corp., 70 Hilltop Road, Ramsey, NJ 07446 USA. Phone: (201) 825-2552; Fax (201) 825-0553.
Periodical postage paid at Ramsey, NJ 07446 USA and additional mailing offices. Publications Mail Agreement No: 40028970. Return Undeliverable Canadian Addresses to
Circulation Dept. PO Box 1051, Fort Erie, On L2A 6C7, circulation@rodmanmedia.com. POSTMASTER: Send address changes to: Coatings World, 70
Hilltop Rd. Ramsey, NJ 07446. Free subscriptions to Coatings World are available to qualified individuals. Others are as follows: U.S. one year $75; two
years $120. Outside U.S. and overseas: one year $95 (U.S.), two years $160 (U.S.), foreign airmail: one year $195 (U.S.). 5% GST required on Canadian orders.
GST #131559148. The publisher reserves the right to determine qualification of free subscriptions. Printed in the USA. Coatings World is used under license from Whitford
Worldwide. Coatings Worlds circulation is audited by BPA International.
Company Capabilities 2016 www.coatingsworld.com
Coatings World | 3
Specialty dispersions:
Any of our standard dispersions can be modified, or new ones
developed, to meet the unique needs of our customers.
Al-Acrylic Dispersions:
Acrylic resin-based dispersions for use in water based coatings.
W Series dispersions:
These dispersions are resin-free, low-VOC dispersions designed for compliant inks and coatings.
WZ Dispersions:
Our newest development, these surfactant based dispersions
are APE Free with zero VOCs.
Products Scope
Alex Color Company supplies its dispersions to the water-based
ink and coatings industries, artist supply manufacturers, as well
as producers of landscape mulches and concrete additives. Our
customers range from small to very large, and our wide variety of
products enable us to supply virtually any requirement for aqueous dispersions.
Technologies
Among Alex Color Companys unique qualities is the companys
ability to manufacture custom aqueous dispersions in batch sizes
from 500 grams to 2,500 pounds, utilizing the customers choice
of pigment, resin, surfactant, etc.
Technical Capabilities
Technical service is promptly available by calling our toll-free
number at (888) ALEX COLOR. Since Alex Color serves a variety of industries, our technical expertise is extensive and broadbased.
NO FREE LUNCH.
NO BASEBALL TICKETS.
NO BALLOONS.
NO HOT AIR.
JUST QUALITY AQUEOUS
DISPERSIONS AT VERY
COMPETITIVE PRICES.
888-ALEX COLOR
www.alexcolor.com
COLOR IS OUR MIDDLE NAME
Global Capabilities
Americas
Arkema Coating Resins
410 Gregson Dr.
Cary, NC 27511
CELOCOR Opaque Polymers voided latex materials that impart hiding and function as a partial replacement for titanium dioxide.
Europe/Middle East/Africa
Arkema Coating Resins EMEA
420 Rue dEstienne dOrves
92705 Colombes
NEOCAR
Asia Pacific
Arkema (China) Investment Co., Ltd. - Shanghai
6/F, Block 1, Life Hub@Daning
1868 Gonghexin Road
200072 Shanghai, China
| Coatings
Company
XX
Capabilities
World
2016 www.coatingsworld.com
| 7
Company
Coatings
Capabilities
World2016
Technical Services
Azelis Americas-CASE has Technical Centers located in Wisconsin and Georgia. Coatings and Graphic Arts laboratories are
housed in our Wisconsin Technical Center. The Georgia Technical Center handles Construction and CASE projects. Both are
equipped to perform extensive applications testing and staffed
with market experts who provide formulation recommendations
to our customers and suppliers.
Major Products
We offer resins, epoxies, epoxy curing agents, silanes, pigments,
fillers, intermediates, isocyanates, polyols, polymeric MDI/TDI,
specialty additives, dispersants, rheology modifiers, defoamers,
biocides/fungicides, stabilizers, plasticizers, surfactants, waxes,
amines, antioxidants.
Global Capabilities
Azelis has dedicated sales specialists and offices supporting the
CASE (Coatings, Adhesives, Sealants and Elastomers) market
in nearly 30 countries around the globe. We have 2 technical
centers servicing the CASE market.
Contacts
Europe
Michel Dumusois
International Business Director
23 Rue des Ardennes
75940 Paris cedex 19
France
+33 (0) 1 44 73 10 00
+33 (0) 1 43 46 85 92
coatings@azelis.com
China
Conrad Bucheleres
Managing Director China
+86 21 68 55 97 79
We create chemistry
wherever you look.
In close collaboration with our customers and their value chain networks, we search for solutions to
meet the market needs today and the challenges of tomorrow. Our technical experts provide advice on
coating guidelines to develop the best solutions leading to faster curing rates, good adhesion to a wide
range of substrates, increased productivity and lower production costs. At BASF, we create chemistry.
basf.us/dpsolutions
BASF Corporation
We create chemistry.
Company Description:
As the worlds leading chemical company, BASF
helps formulators of architectural, industrial and
transportation coatings deliver sustainable, innovative solutions that meet or exceed performance
requirements.
Technologies:
We innovate to help you gain competitive advantages and meet societys needs. You benefit from
the broadest product portfolio in the industry to
achieve your formulating goals. Among our priorities is a focus on sustainable solutions e.g. low
and zero VOC products, APEO-free and formaldehyde-free materials, low energy curing and
replacement of latex with minimal environmental
impact.
Technical Services:
BASF provides a breadth of technologies and
cross-functional teams with expertise in chemistry, applications and formulations. We offer local
support capabilities from sites in Charlotte, NC
and Southfield, MI.
Product Areas:
We provide the raw materials, product range,
industry experience and technical knowledge to
help enhance the quality, appearance, heat management and durability of all exterior and interior coatings. In your challenging environmental
conditions, our resins provide adhesion, maintain
gloss and prevent corrosion. And you can preserve your applications color with our light stabilizers that prevent degradation and color change
as a result of UV exposure.
Headquarters:
11051 Steele Creek Road
Charlotte, NC 28273 USA
Tel: 800-962-7829
Email: dpsolutions@basf.com
Fax: 800-971-1123
Website: www.basf.us/dpsolutions
Distributors of BASF Products:
Brenntag
MF Cachat
Chidley & Peto
PT Hutchins
Chemroy
Ribelin
EW Kaufmann
SCS
HEADQUARTERS
750 National Court, Suite 100
Richmond, CA 94804
Tel.: +1-415-771-4757
Fax #: +1-415-789-4150
E-mail: info@fluorescentcolor.com
Web: www.fluorescentcolor.com
Company Description:
Brilliant was founded to serve the needs of industrial users of
fluorescent pigment around the globe. We offer a world-class
range of fluorescent pigments, soluble toners, and paint and
ink concentrates.
BSR: solvent resistant grade for nail polish, aerosol paints, etc.
BMS: non-migrating pigment for vinyl plastisol and to eliminate
plateout in masterbatch
BNF: completely non-formaldehyde pigment for masterbatch
and crayons
BSTS: solvent soluble toner for solvent flexo and UV flexo
BSTW: water soluble toner for water flexo
BFE: water-based emulsions for water flexo, textile printing, etc.
Markets Served:
Brilliant Fluorescent Pigments are used in a wide range of applications:
Paints/Coatings: Aerosol Paints, Aircraft Finish, Clay Target
Coatings, Craft Paints, Industrial Coatings, Nail Polish, Paper
Coatings, Powder Coatings, etc.
Inks: Flexo, Gravure, Litho, Screen, UV, Industrial Ink Jet, etc.
Plastics: Masterbatch, Liquid Color, Rotomolding and Casting applications for Olefins, PVC, EVA, Polyurethanes, etc.
Miscellaneous: Crayons, Paint Balls, Seed Coatings
Technologies:
Our team is steeped in fluorescent pigment technology. We
create specialty polymeric pigments that give the brightest fluorescence while also performing in a vast array of applications,
whether it be standing up to strong solvents, minimizing swelling and thixotropy, or eliminating plateout. Its what our key
employees have been doing since the 1980s.
Technical Services:
Our team is comprised of technical experts, each with over
twenty years experience in the world of fluorescent pigments.
Our capabilities range from developing fluorescent pigments for
all manner of printing inks: flexo, gravure, and screen inks; to
EMImills
Engineered Mills, Inc.
sales@EMImills.com
Logo
EMImills
Technologies:
Bead mills for laboratory research, quality control and technical service applications have been advanced to allow the
development of Nano dispersions. The results help users to scale
products to the full scale production mills that it manufactures
or any other mill in the industry.
HEADQUARTERS
888 E. Belvidere Road U-214
Grayslake, Illinois 60030 USA
Tel.: +1+847-548-0044
Fax: +1+847-548-0099
E-mail: Sales@EMImills.com
Web: www.EMImills.com
Technical Services:
Over 70 years of experience in wet milling and dispersion technology is available to assist customers with their dispersion
processing. Knowledgeable sales and technical support staff
are available as well as the corporate based R&D laboratory to
process and evaluate customer dispersion samples to see what
process might work best for their applications.
Date founded
Originally founded in 1979 as Eiger
Machinery, Inc. the name was
changed to EMImills - Engineered
Mills, Inc. in 2012 to better define
its product expertise and expand
its technology.
Company Description:
EMImills - Engineered Mills, Inc.,
Grayslake, Illinois, USA manufactures laboratory and production
bead mills for wet milling, fine grinding and dispersing of liquid and paste products. EMI has addressed the need for reliable laboratory bead mills for product research, quality control
and technical service applications giving researchers tools that
provide realistic results. In addition we manufacture laboratory
and pilot scale mixers, dispersers, and homogenizers and supply support equipment such chillers and grinding media. Testing laboratory and demonstration equipment are available at
its USA site.
Made in America sold throughout the world.
Markets Served:
EMI started in the paint, ink,
colorant and coating industries
providing bead mills for the production of high quality products.
The same technology was then
sold into other industries that
benefited from the fine grinding
technology. These have included
dyes, catalysts, conductive coatings, fuel cell, agrochemicals, food
products, cosmetics, pharmaceuticals and advanced Nano disperCompany Capabilities 2016
Major Products:
Laboratory Mini Mills for product research using
minimum amounts of raw materials
Pilot Scale Mill for small batch production and to assist in
scale up to production
Horizontal Bead Mills for full scale production
Microtron Mill for Nano processing high energy milling
using fine media
Laboratory and Pilot Scale dispersers and mixers
Laboratory Stirrers
Laboratory and Pilot Plant Chillers
Grinding Media quality beads as well as technical support
Global Capabilities:
Corporate headquarters is located
in Grayslake, Illinois USA which is
close to Chicago OHare International airport.
Sales and Technical Contacts:
Technical Sales:
Dave L. Peterson
1-847-548-0044
Dave.Peterson@EMImills.com
Engineering Support:
Robert Radcliff
847-548-0055
Bob.Radcliff@EMImills.com
www.coatingsworld.com
Coatings World | 13
www.chromaflo.com
Industrial Market
Chromaflo Technologies is the leading supplier of additives and
pigment dispersions for the industrial coatings market, offering
a wide range of high-performance colorants in liquid resin based
100% solids, solvent borne, waterborne, plasticizers and chip
dispersions. Products are made with sophisticated equipment for
batch-to-batch consistency. To ensure the highest quality possible, products are also rigorously tested in our state-of-the-art
laboratory to meet each customers unique specifications.
Leading industrial brand names are:
UCD
CHROMACHEM
TEMACOLOR
SPARTACRYL
MAESTRO
Detailed Chemistries
Low VOC
Amine-dispersed acrylic
APE-free
Thermosetting polyol
IR-reflective systems
Thermoplastic acrylic
Monomer
Polysiloxane
Polyurea
Unsaturated polyester
Polyaspartic
Cellulose acetate butyrate
Epoxy
Alkyd (long oil, medium oil)
Plasticizer (phthalate-free, phthalate-containing)
Americas Region
Ashtabula, Ohio, USA (Corporate Office)
Sao Paulo, Brazil
+(440) 997-5137
+55 11 2078 0700
+613 9703-8888
+86 21 2416 9200
+31 46 4570100
+27 (0) 11 839 3695
10 2013
Discover life
Elementis Specialties
Elementis Specialties
469 Old Trenton Road
East Windsor, NJ 08512 USA
Tel: 609-443-2000
E-mail: contactus.web@elementis.com
www.elementis.com
Date Founded
In 2000, Elementis plc joined the former businesses of Rheox
(then the innovative market leader in rheological additives with
products such as BENTONE, BENTONE GEL, THIXCIN,
THIXATROL, M-P-A, RHEOLATE and Daniel Products
into one entity, resulting in the creation of Elementis Specialties.
Company Description
Elementis Specialties provides high value functional additives to
the architectural and industrial coatings, adhesive, sealants, and
inks. These additives improve the flow characteristics and performance of our customers products or production processes.
We offer a comprehensive product portfolio that includes rheology modifiers for aqueous and solvent systems, defoamers, dispersing and wetting agents, colorants, adhesion promoters, waxes
and surface active additives.
Our major products are BENTONE organoclays, RHEOLATE
rheological additives, THIXATROL rheology additives, M-P-A
anti-settling agents, DAPRO specialty additives, NUOSPERSE
wetting and dispersing agents, NALZIN corrosion and rust inhibitors, SLIP-AYD waxes and slip additives and TINT-AYD
colorants. These enhance the feel, flow and finish of everyday
products including surface coatings, adhesives and sealants, and
construction products.
We continue to bring new technologies and products to the markets we serve and to work collaboratively with our customers.
This focus allows us to nurture our partnerships and to build on
our technical expertise and commitment to the ongoing improvement of our industries.
Markets Served
Adhesives & Sealants Asphalt & Bitumen Construction
Personal Care Decorative Paints and Coatings Inks
Industrial Paints and Coatings Lubrication Oilfield
Plastics Refractory & Ceramics Water Treatment
Technologies
RHEOLATE HX products (6008, 6010, & 6050) are a series of ICI builders that are typically 25 to 50% more efficient
than standard rheology modifiers. Less is really more with
these thickeners, as they improve the application properties with
uniform film build and improved hiding while also offering improved color properties and block resistance. All of the products are zero VOC and APEO free and have been designed to
work across the latest zero VOC latex systems.
RHEOLATE CVS 15 is the next generation mid-shear NiSAT
for low VOC decorative paints. RHEOLATE CVS 15 is highly
efficient compared to typical thickeners currently in the market
and offers improved viscosity stability after tinting.
RHEOLATE 465 is a strongly hydrophobically modified alkali
swellable acrylic thickener which has both ionic and associative
thickening mechanisms. It provides both mid and high shear
rate viscosity with balanced performance for superior packaging and application properties. RHEOLATE 465 is especially
suitable for waterborne architectural high PVC, high gloss and
semi-gloss architectural paints and industrial coatings.
NUOSPERSE FX 665 is a hydrphobic copolymer dispersants
with outstanding water resistance for waterbased industrial and
high performance decorative paints. NUOSPERSE FX 665
is highly efficient and offers excellent compatibility with most
binder systems and RHEOLATE Thickeners.
NUOSPERSE FX 631 is a general purpose copolymer dispersant for coatings and inorganic pigment dispersions. This
product is highly efficient and presents excellent application and
superior color properties.
Major Products
Our major products are BENTONE organoclays, RHEOLATE
rheological additives, DAPRO specialty additives, M-P-A antisettling agents, NALZIN corrosion and rust inhibitors, THIXATROL
rheology additives, NUOSPERSE wetting and dispersing agents,
TINT-AYD colorants, SLIP-AYD waxes and slip additives.
We also offer SERDOX polyglycol ethers, SERDOLAMIDE
alkanolamides, and SERVOXYL phosphate esters
Global Capabilities/Technical Services
The United States, Livingston Scotland, Taiwan,
The Netherlands, Sao Paulo, Brazil, China
East Windsor, NJ 800-866-6800
Cologne, Germany 49-221-2923-2000
Contacts
USA Sales and Technical: Dave Brown
Europe Sales: Holger Heidelman, Technical: Carlos Freito Fraile
Asia Sales: Mark Su, Technical: Cheehon Lew
HEADQUARTERS
1400 N. State Street
Marengo, IL 60152 USA
Tel.: +1-800-654-4242
Fax: +1-815-568-4145
E-mail: info@eps-materials.com
Website: www.eps-materials.com
Company Description
EPS/CCA is a leading supplier of coating resins and colorants to serve
the Architectural, Industrial, Construction, Adhesives and Sealants markets. With more than 20 years in the industry, EPS/CCA continues to
deliver products backed by unmatched technical and customer support.
Headquartered in Marengo, IL, USA, EPS/CCA maintains operations in
the US, Europe and China providing quality products with exceptional
R&D resources.
Technical Mission
With decades of experience, we are committed to understanding the needs of our customers and helping them succeed with
innovative technology and superior service. With a personalized
approach, innovative technology and exceptional technical service we make doing business easy.
Markets Served
EPS/CCA offers a comprehensive selection of innovative emulsion technologies, conventional resins and colorants to serve the
Architectural, Industrial, Construction, Adhesives, and Wood
markets.
Technologies
EPS acrylic and styrene acrylic emulsions utilize proprietary adhesion technology with value-added features, including superior
adhesion to multiple substrates, early water resistance, block
resistance and abrasion resistance.
The exterior exposure test fence program ensures that durability properties such as grain-crack resistance, chalk adhesion and
dirt pickup resistance are achieved.
Additional resin choices include alkyds, water dispersible alkyds,
PUDs, polyesters and solution acrylics.
Major Products
EPS acrylic and styrene acrylic emulsions offer superior performance properties at very low VOC and are designed for direct
application to challenging substrates such as concrete, chalky
surfaces, glossy surfaces, and ferrous and non-ferrous metals.
CCA Colorants product lines NovoColor IP, NovoColor SF,
ExacTint, Universal Colorants, OptiColor IP, OptiColor
PE, and OptiColor XP provide a full colorant offering for
water based and solvent based applications.
Global Capabilities
EPS Headquarters
1400 N. State St.
Marengo, Illinois 60152
info@eps-materials.com
Sales: 800-654-4242
Technical Service: 800-601-8111
CCA Colorants
1630 West Hill Street
Louisville, Kentucky 40210
info@ccofa.com
Sales: 800-654-4242
Technical Service: 800-729-3311
UNITED STATES
Manufacturing Locations
Los Angeles, California
Rockford, Illinois
Marengo, Illinois
Kankakee, Illinois
Louisville, Kentucky
Williamsport, Maryland
Garland, Texas
EUROPE
Nijverheidsweg 35
3341 LJ H.I. Ambacht
The Netherlands
info@eps-materials.com
Sales: +31 78 683 3250
Technical service: +31 78 683 3250
CHINA
Lot 3 Xintang
District Dalinshan
Dongguan Guangdong 523822
www.epscca.com 1-800-654-4242
Hockmeyer
TECHNICAL MISSION:
Hockmeyer offers an array of technologies in which to produce
quality, competitive products. It is Hockmeyers goal to continue to lead the way in the development of new technology for
the mixing and milling industry.
HEADQUARTERS
610 Supor Blvd., Harrison, NJ 07029
Tel: 973-482-0225
Fax: 973-484-6114
Manufacturing and Parts & Service
6 Kitty Hawk Lane, Elizabeth City, NC 27909
Tel: 252-338-4705
Fax: 252-338-6540
CONTACTS:
Tim Mizell, Vice President of Sales & Marketing
Sales Contact: Shawnacy McManus, Market Manager
Technical Contact: Mike Villardi, VP of Production
and Customer Service
UNIQUE PRODUCTS:
Hockmeyers HCPS Immersion Mill is able to process products
up to 2 million centipoise. This revolution in media milling technology can drastically reduce grind time and increase product
quality.
R&D CAPABILITIES:
HOCKMEYERs North Carolina location not only houses our
manufacturing facility but also includes our on-site, state of the
art Customer Testing Facility. Potential customers, as well as
long time customers are welcome to visit our laboratory or send
in product samples so that we can determine the best equipment
for your needs. This allows you to achieve the highest product
standards possible. Call to set up a free lab trial today!
COMPANY DESCRIPTION:
Hockmeyer Equipment Corporation has been providing process
solutions for over 70 years. It is a leader in the wet grinding and
dispersion industry and offers custom designed process equipment for mixing, blending, dispersing, and particle size reduction. The Hockmeyer Team is dedicated to producing processing
equipment that is of the highest quality available.
PRODUCTS SCOPE:
Hockmeyers broad range of products can provide process solutions to the Paint, Ink, Coatings, Adhesives, Ceramics, Agricultural, Pharmaceutical, Cosmetic and Food Industries.
MAJOR PRODUCTS:
HCP Series Immersion Mills: The HCP Series, including HCP
(micro grinding) HCPS (high viscosity grinding) and HCPN
(Nano grinding) provide excellent particle distributions and
high quality products.
Dispersers: Mechanical and inverter drives with horse power
ranges from 2 to 400 hp.
High Viscosity Mixing Systems: Multi-Shaft, Double Planetary
and Horizontal Units.
Presses: Portable, Lift to Discharge and Platform Presses.
HEADQUARTERS
P.O. Box 218
2170 Julia Simpkins Rd.
Hiwassee, VA 24347
Tel.: (540) 980-7233
Fax #: (540) 980-8781
E-mail: hoover@hoovercolor.com
Web: www.hoovercolor.com
Company Description
Hoover Color was established and incorporated in 1923 in New
York. Now located in the heart of the Blue Ridge Mountains
of Virginia, Hoover Color is adjacent to two major interstate
highwaysI-77 and I-81putting it within a one-day drive of
the majority of the U.S. population. Hoover Color also has easy
access to the ports of Norfolk and Richmond, Virginia, and
Charleston, SC.
The company owns 3,000 acres of land in and around
Hiwassee, where it maintains its production facilities, laboratories and corporate offices. The main complex comprises 66,000
sq. ft. of production and warehouse facilities, 4,000 sq. ft. of
lab space, and 3,600 sq. ft. of office area. The original plant was
built on this site in the early 1920s, with the last major renovation and expansion completed in 2006.
Color also acquired mineral deposits, which made it fully integrated in the mining and manufacturing of Siennas, Umbers, and
Ochres. These rich earth tones are the hallmark products for
Hoover Color, especially Raw and Burnt Siennas. Our product
range includes Natural and Synthetic Iron Oxides, Blended Iron
Oxides, Chromium Green Oxides, Van Dyke Browns, Tuscan
Blends and Complex Inorganic Pigments.
Distribution of Pigments (under the manufacturers label and manufactured to Hoover Colors Specification in toll production agreements) - In
order to offer our customers a wider range of colors, Hoover Color has
reached agreements to distribute certain pigments and has contracted the
toll manufacturing of others. Various Synthetic and Natural Iron Oxide
pigments, Mixed Metal Oxides and Van Dyke Brown pigments are all
distributed in order to give our customers a complete range of inorganic
colored pigments.
Pigments for Colored Concrete Products - Hoover Color provides oxides of iron to produce yellows, reds, blacks and browns;
chromium oxides to produce greens and titanium dioxides
produce whites. Oxides of cobalt and/or copper can produce
various greens and blues. All of these pigments are produced
by Hoover Color and comply with ASTM test method C979,
Pigments for Integrally Colored Concrete. Hoover Color uses
a computerized color measuring system to measure these color
variations and publishes this information to its customers in a
Certificate of Analysis. This helps to ensure that the color
variation is within previously stated specifications.
Manufacture & Sale of the Hoover Automatic Muller - Since
the 1940s, Hoover Color has always been in the forefront of
color control, developing the Hoover Automatic Muller. The
Hoover Muller has since become the standard piece of testing
equipment for the pigment industry. It is also widely used in
the ink and cosmetic industries. The Hoover Muller has been
recognized by ASTM and ISO as an approved way to prepare
samples for color evaluations.
HEADQUARTERS
8F.-2, No.51, Hengyang Rd., Zhongzheng Dist,
Taipei City 100, Taiwan (R.O.C.)
Tel: +886-2-2313-1000
Fax: +886-2-2313-1555, +886-2-2313-1556
E-mail: Keeneyes@keeneyes.com.tw
developing_1@keeneyes.com.tw
South Africa Branch
Palazzo Towers West, Montecasino, WIlliam Nicol Drive, Fourways,
Johannesburg, South Africa
Tel: +27-11-510-0340
Fax: +27-11-510-0001
E-mail: southafrica@keeneyes.com.tw
Rex_hsu@keeneyes.com.tw
www.keeneyes.com.tw
Company Description
Keeneyes Industrial Corp. Limited was founded by Y.C. Liao
in 1974 in Taiwan. We are a reputable independent chemical distribution company with customers around the world.
The company is headquartered in Taipei with multiple offices
throughout China and a network of associates around the
world.
We are known for proving professional services to our customers based on our business principles of service excellence and
the best quality products with reasonable and stable prices.
Over the years, we worked with customers to identify and
source products for specific applications a service Keeneyes
is always pleased to discuss with customers and potential customers.
Keeneyes is poised for further growth to service customers
throughout the global market. With our continuing investment in high caliber professionals and technology, we look
forward to building closer relationships between suppliers and
customers.
Coatings World | 25
Lonza
HEADQUARTERS
1200 Bluegrass Lakes Parkway
Alpharetta GA 30004
Tel.: 678 624 5800
E-mail: materialsprotection@lonza.com
Web: www.lonza.com
Founded in 1897 in the Swiss Alps, Lonza today is a well-respected global company with more than 40 major manufacturing and R&D facilities and approximately 9,800 full-time
employees worldwide. The company generated sales of about
CHF 3.64 billion in 2014 and is organized into two marketfocused segments: Pharma&Biotech and Specialty Ingredients.
Company Description
Lonza is the global leader in microbial control with the broadest portfolio of active ingredients and registered formulated products. We have
market-leadership positions in water treatment, materials protection,
hygiene, personal care and wood treatment with strong offerings in
performance products. We offer unmatched expertise in navigating the
complex global regulatory environments.
Innovation
Lonza is committed to investing in innovative solutions that
meet our customers current and future needs. Our global network of R&D resources includes a 65,000 sq. ft. innovation
and Technology center in Alpharetta, GA, USA - an unmatched
investment which will provide solutions to our customers today,
and for years to come.
Additional technology and customer support facilities are located in the U.S., Brazil, the EU, Japan, Singapore, China, South
Africa, Australia, India and New Zealand.
We offer global formulations capabilities which are tailored for
our customers unique local market needs.
Sustainability
Lonza is committed to being a good corporate citizen and to
operating in a safe and environmentally sound manner.
About Lonza
Lonza is one of the worlds leading and most-trusted suppliers
to the pharmaceutical, biotech and specialty ingredients markets. We harness science and technology to create products that
support safer and healthier living and that enhance the overall
quality of life.
Not only are we a custom manufacturer and developer, Lonza
also offers services and products ranging from active pharmaceutical ingredients and stem-cell therapies to drinking water
sanitizers, from the vitamin B compounds and organic personal
care ingredients to agricultural products, and from industrial
preservatives to microbial control solutions that combat dangerous viruses, bacteria and other pathogens.
Materials Performance
& Protection
www.lonza.com
Technical Services
We offer an extensive machine program for process-engineering;
providing solutions for wet and dry grinding, mixing, dispersing,
de-aeration and classifying. Our strength lies in our ability to
build and maintain strong relationships with customers before,
during and after a purchase.
Major Products
Some of our most renowned wet grinding mills include:
Alpha
Omega
DeltaVita
Circulation Mill Type LMZ
Horizontal Disk Mill Type LME
Some of our most well-known dry grinding machines are:
CGS Fluidized Bed Jet Mill
S-Jet Steam Jet Mill
ConJet High-Density Bed Jet Mill
Condux Universal Mill
Cellulose Cutting Machine
Global Capabilities
United States, Germany, Brazil, China, Russia
Contacts
Sales:
Stephen Miranda
Stephen.miranda@netzsch.com
Technical:
Paul Trefny
Paul.trefny@netzsch.com
Technologies
NETZSCH Premier Technologies, LLC specializes in advanced
technologies for every application. Our state-of-the-art technical
center is designed for pilot product production and testing on a
diverse range of wet and dry grinding mills. Our most notable
technologies are in high speed dispersion and mixing, horizontal
media mills, bench-size, pilot plant and production-size mills,
and particle analysis.
r
ct o ur
u
d
o
fo
.
r pr one o nters
u
o
ce
in
ty
Tes ation rt test more!
-a
lic
rn
app of-the to lea
w
testa all no
C
New!
Economic Dispersionizer
OMEGA
Contacts
President & COO: Michael Rossomando
Marketing: Frank Magdits
Sales: Frank Magdits, Michael Rossomando
Technical: Joe Viso, Regi Williams
Northeast States
Ray Hodde
(800) 722-3507
panne.ma.ultranet@rcn.com
Distributors and Agents
Midwest States
BoehIe Chemicals
2850 Commerce Dr.
Rochester Hills, MI 48309
(800) 349-8434 Fax: (586) 710-6870
www.boehlechem.com
Southeast and Southern States
McCullough & Associates
1746 Northeast Expy NE
Atlanta, GA 30329
(800) 969-1606 Fax: (404) 329-0208
www.mccullough.com
Pacific Coast and Mountain States
Pacific Coast Chemicals
2424 Fourth St.
Berkley, CA 94710
(510) 549-3535 Fax: (510) 549-0890
www.pcchem.com
Canada
A.S. Paterson Company Limited
1110 Sheppard Ave. East. Suite 404
Toronto, Ontario, Canada M2K 2W2
(416) 222-3333 Fax: (416) 222-5034
www.aspaterson.com
The Products
The Ystral Jetstream Mixer - meets all requirements to
achieve a complete and homogenous mixture in a vessel. The
turbulences provided by the mixing head and strong vertical
circulation allow optimal mixing of the tank or vessels entire
contents without any incorporation of air by a vortex or along
the mixing shaft. Even materials with high viscosities, are fully
influenced. Unlike standard propeller mixers, the medium does
not rotate in the tank and baffles are not required. Even heavy
sediments are fully suspended.
The Ystral Dispermix similar in operation to the Jetstream,
but with a serrated stator. Dispermix causes intensive mixing in
both the micro and macro range of the product. It simultaneously disperses and mixes in one single operation and negates
the need for a second step with a high shear mixer.
Ystral Conti TDS provides dust and loss-free emptying of
containers, feeding of powder, dosing and adding, wetting and
dispersing to a completely agglomerate-free result achieved in
one process step within one machine. Production time is minimized, partial processing steps are avoided and production cost
is reduced to a minimum with higher efficiency of the raw material and higher resulting product quality.
Technical Services
Powder Technologies can also assist you with feasibility and engineering studies, process and plant design, installation, start-up,
training, and maintenance and parts inventory. We have a fully
equipped and staffed test facility, as well as rental equipment for
on-site evaluation.
Coatings World | 31
Phoseon Technology
TM
Phoseon Technology
7425 NW Evergreen Parkway
Hillsboro, OR 97124 USA
Tel: +1 503-439-6446
Fax: +1 503-439-6408
E-mail: info@phoseon.com
www.phoseon.com
Date Founded
2002
Company Description
In 2002, Phoseon Technology pioneered the use of LED technology for UV curing applications. As the world leader in
UV LED curing, Phoseon provides patented LED technology
to deliver rugged, high-performance products for application
specific solutions. The Company is focused 100% on LED technology and provides worldwide sales and support capabilities.
Markets Served
Phoseons UV LED curing products are currently being utilized
in the coating industry because they offer enhanced system capabilities due to being a solid-state device, lower operating costs,
and environmental benefits of safer workplace environment and
no hazardous materials. Application areas in UV coating include: wood and vinyl, automotive, musical instruments, fixtures
and many others.
Technologies
Phoseons patented Semiconductor Light Matrix (SLM)
technology encapsulates LEDs, arrays, optics and thermal management to ensure curing performance. Each of these four components are a strictly engineered system that provide maximum
UV energy and superior performance while also increasing longterm robustness for demanding applications.
Technical Services
Phoseons R&D team has extensive knowledge in the development of LED systems and the capability to design and build
leading edge products to meet the industrys technical demands.
With over 200 patents and trademarks, Phoseon has earned a
worldwide reputation for innovation, quality and reliability.
32 | Coatings World
Major Products
Phoseon products are constructed with LED curing technology that uses Light Emitting
Diodes (LEDs) which are semiconductor devices that emit light
with a specific peak wavelength.
These UV LED curing systems
are developed to specific application and machine specifications. The UV LED curing lamps
are available in both water and
air-cooled formats.
Global Capabilities
Phoseon has sales office and distributors worldwide, for more
information visit: www.phoseon.com/contact/
Sales, Technical, European and Asian Contacts
Americas:
Michael Beck
americas@phoseon.com
EMEA:
Rob Karsten
emea@phoseon.com
ASIA:
Chi Li
apac@phoseon.com
www.coatingsworld.com
Major Products
Inorganic & Organic Pigments, Hydrocarbon Resins & Rosin
Esters, Fillers, Flame Retardants, Plasticizers, Silanes, Petroleum
Products & Waxes, and related Additives
Global Capabilities/Warehouses
Chicago IL, Dallas TX, Dalton GA. Ewing NJ, Fullerton CA,
Kent OH
Sales & Technical Contacts
Don Beeman 609-439-3110, donaldb@recarroll.com
(New England, Quebec)
Brett Bixenmann 609-439-6257, brettb@recarroll.com
(SW, Texas)
David Carroll 609-439-1591, davidc@recarroll.com
(Ohio, WV)
Michael Clark 609-439-3109, michaelc@recarroll.com
(MidAtlantic)
John Coile 609-358-2616, johnc@recarroll.com
(Southeast)
Charleen Heinke 609-439-1873, charleenh@recarroll.com
(Midwest)
Donna Kling 609-498-5545, donnak@recarroll.com
Sales Manager
Doug Ruch 609-658-2417, dougr@recarroll.com
(Northern OH)
t: 1-800-257-9365
e: paintinfo@recarroll.com
w: www.recarroll.com/paint
Solvay
North America
504 Carnegie Center
Princeton, NJ 08540
Tel.: 888-776-7337 609-860-4000
Fax: 609-860-0463
E-mail: NovecareCC@solvay.com
www.solvay.com
Company Description
Solvay is a worldwide leader of high performance monomers,
polymers, surfactants, dispersants and additives to the coatings
industry. Solvay delivers creative solutions to meet customers
needs for sustainable, high-performance solutions. With continuous investments in a global manufacturing footprint and
dedicated R&D support, Solvay continues to be an added-value
partner.
The recent acquisition of Cytec by Solvay further expands
an already comprehensive portfolio of products dedicated to
Coatings industry.
Solvay Novecare has been a global leader in emulsion polymerization enabling the conversion to water-based systems with
specialty surfactants and monomers. Understanding surface
chemistry and having the right building blocks to offer effective,
tailored, additives solutions can further boost performance for
a variety of coatings.
Solvay Specialty Polymers holds leading positions with high
performance PVDC and PVDF polymers, PTFE, and PFPE
additive technologies.
Coatings World | 35
Shamrock Technologies,Inc.
HEADQUARTERS
Shamrock Technologies, Inc.
Foot of Pacific Street
Newark, NJ 07114-2888
Tel.: 800-349-1822 / 973-242-2999
Fax: 973-242-8074
E-mail: marketing@shamrocktechnologies.com
Website: www.shamrocktechnologies.com
Company Description
Shamrock creates innovative products our customers need to
grow their businesses. For nearly 75 years, Shamrock advances
have driven the use of PTFE and wax additives in a wide range
of applications including inks, coatings, lubricants, thermoplastics, and personal care products. Shamrock is the global leader
in PTFE additives, pioneering their use for inks and coatings
and offering an extensive product line including PTFE powders,
specialty waxes, compounds, emulsions, and dispersions. These
materials enhance our customers products by controlling slip,
rub/abrasion resistance, texturing, water repellency, gloss/matting and feel.
Technical Mission
Our in-depth technical knowledge and production experience
gives ink and coatings formulators the edge they need. Shamrock serves our customers needs with extensive application and
R&D laboratories, custom production equipment, and industry
experienced professionals. Our chemists, scientists, and engineers are highly trained experts in the major applications and
industries and bring valuable first-hand knowledge to customers
through our Product Marketing Center (PMC). All of our facilities are ISO 9001:2008 Certified.
Commitment to Service
We strive to make buying and using Shamrock products as
easy and efficient as possible. Shamrocks international Sales
Network ensures that each of our customers receives optimal
attention, support, and service, while our Customer Service
Group offers assistance with scheduling, normal and special
deliveries, warehousing, and many other details, before, during, and after the sale.
Product Lines
SST Series: full range of micronized PTFE products
AquaFLON Series:micronized water based PTFE
dispersions
S Series: wide variety of micronized waxes and alloys
Texture Series: texturing agents for all liquid coatings
PowderTEX Series: texturing agents for powder coatings
Hydrocer Series: pre-dispersed or emulsified additives for
water based systems
FluoroSLIP Series: micronized PTFE/wax blends for optimal
slip and abrasion resistance
FluoroTEX: macro PTFE powders provide texturing while
improving slip and abrasion resistance for liquid coatings
Neptune Series: micronized PTFE and waxes for water
based systems
Global Capabilities
U.S. Production Facilities:
marketing@shamrocktechnologies.com
Foot of Pacific Street
Newark, NJ 07114-2888
Tel: (973) 242-2999; Fax: (973) 242-2999
109 N. McKinley Street
Henderson, KY 42420
301 Community Drive
Henderson, KY 42420
Europe:
Shamrock Technologies bvba
Heersterveldweg 21
B-3700 Tongeren, Belgium
Tel: +32 1245 8330; Fax: +32 1245 8340
www.shamrockeurope.com
Asia:
Shamrock Technologies (Tianjin) Co., LTF.
Factory No. 5, 9th Avenue, Fenghua Industrial Park
TEDA, Tianjin, China 300457
Tel: 86 22 59813085; Fax: 86 22 59813099
sales@shamrocktechnologies.com.cn
http://www.shamrocktecnologies.com
Sower Corporation
HEADQUARTERS
R2901, BM InterContinental Business Center, 500 Hengfeng Road
Shanghai 200070 China
Tel.: 0086 21 32201032 (From Monday to Friday)
0086 21 63538710 (Saturday and Sunday)
Fax #: 0086 21 63178868
E-mail: sower@sowerchina.com
Web: www.sowergroup.com
Sower Group Company Description:
Shanghai Sower Mechanical & Electrical Equipment Co., Ltd.
Shanghai Sower Mechanical & Electrical Equipment Co Ltd,
headquarters of Sower Group, provides clients from China and
over 80 other countries and regions with single machines, complete equipment, production lines and turnkey solutions of a
whole plant in the chemical industry. It plays an important role
in overseas project construction and investment partnership. The
company also offers clients with dispersers, wet grinding equipment, high shear emulsifiers and emulsification pumps, mixers,
filling and packing equipment, powder conveying systems, reacting vessels, atmospheric pressure vessels and pressure vessels. Sower Baoshan Engineering and Project Center Baoshan
Engineering and Project Center is a high-end production plant.
It provides clients with single machines, complete equipment,
production lines as well as full services including manufacture,
installation, commissioning and maintenance of a whole plant.
It substantially supports Sower with technologies of equipment
manufacture, installation and customization.
Shanghai Sower Construction & Engineering Co., Ltd.
(Shanghai Sower Chemical Design Institute)
Shanghai Sower Construction & Engineering Co., Ltd. (Shanghai Sower Chemical Design Institute), is one of the pioneers
successfully transform itself from an equipment manufacturer
into a Chemical Project Contractor, an Engineering Procurement
Construction (EPC) company in China. Sower Chemical Design
Institute has earned the certificates of Chemical Engineering Design Qualification, Design License of Special Equipment (Pressure Vessel and Pressure Pipeline), Electrical and Mechanical
Equipment Installation Qualification.
With over a decade of experience in manufacturing complete
equipment, Sower is competent to optimize production line
design and offer the best option of key equipment for clients.
Therefore Sower is able to aide clients to effectively cut production cost and minimize various risks. Sowers staff is composed
of registered engineers and technical experts. The company targets projects of 30 to 50 million RMB in fine chemical, pharmaceutical and light industries and provides services including
engineering design and EPC.
Major Products:
Dispersers/Dissolvers
Mixers
Automatic Feeding
Systems &
Filling Equipment
Mills
Vessels & Tanks
Powder Equipment & Systems
EPC
Complete & Customized Sets
Markets Served:
Sower specialized in R&D and manufacturing coatings equipment at its early stage. After investing heavily in R&D, Sower
has successfully earned a number of patents. Consequently, the
company has gradually expanded its business sectors. For over
the past ten years, Sower has provided clients with comprehensive equipment and technology solutions mainly for fine chemical industry. The company also offers services including
Fine chemical equipment design,
Fine chemical equipment manufacturing,
Fine chemical equipment customization,
Fine chemical equipment production line solution,
Fine chemical project EPC
For years of development, Sower has been competent to provides
full equipment and production plants solutions for various industries, such as coatings, ink & dye, adhesive, resin, lubricant, chemical additives, flavors & fragrances and electronic chemical, etc.
Technology:
This year Sower has achieved a good result as the company has
made good strategic plans and keep investing R&D. Sower has
its own design institute with chemical engineering design courses
and therefore Sower is a leading EPC contractor in the area of
chemical engineering design. Sower takes it as a competitive advantage in the market. The company also continues to improve
its design and technologies. In addition, Sower has accumulated
rich on-site experience and therefore the company is able to
provide clients with the best solutions upon factory floor plan,
equipment arrangement and equipment options, etc. Sower also
offers them most reasonable prices. Clients can enjoy price discount of factory floor plan design, equipment arrangement and
construction renderings before signing the contract! It is hard for
any other company to serve clients in such a similar way. This
year Sower successfully undertakes a number of fine chemical
EPC projects, including some large-scaled coatings EPC projects,
because the company is leading in the EPC sector.
Apart from large-scale EPC production lines, Sower continues to
specialize in R&D of single machines. Sowers design involves
functionality, usability and aesthetic. In the future, we will invest
more on R&D of single machines and complete production lines
to keep ahead of the competition.
Trade Show Information:
Middle East Coatings Show 2016-Visit Us At Stand E14
NTERLAKOKRASKA - 2016-Visit Us At Stand FE111
Headquarters:
Specialty Polymers, Inc., 2765 National Way,
PO Box 299, Woodburn OR 97071
800-770-7523
East Coast:
869 Old Richburg Road, Chester, SC 26706
800-671-2842
www.specpoly.com
info@specpoly.com
ABOUT SPECIALTY POLYMERS
Specialty Polymers is a dynamic, privately held manufacturer of
water-based polymers and adhesives. Our products are designed
to meet the most demanding needs from customers around the
world, and our employees are committed to providing the best
customer service in the industry. We pride ourselves on being
an innovative, responsive and flexible supplier of high quality
products.
TECHNICAL EXPERTISE
Our strength is the development of innovative polymers. For more than
45 years, we have been on the forefront of polymer development. Our
highly skilled polymer and application chemists work in research and
development facilities located in Oregon and South Carolina.
HISTORY
Our roots date back to 1969, when Ray Southwell started
Specialty Polymers with a goal to provide high quality, innovative
products to the coatings industry. Since then, Specialty Polymers
has grown to have multiple manufacturing sites and more that
300 active products.
SALES TEAM:
Dave Carnahan
West Coast Sales Manager
(800) 770-7523
dcarnahan@specpoly.com
Dave Hartmann
East Coast Sales Manager
(800) 671-2842
dhartmann@specpoly.com
Mike Beland
Midwest Sales Manager
(800) 671-2842
mbeland@specpoly.com
RESPONSIVE
customer service on both coasts
manufacturing on both coasts
laboratories on both coasts
North American sales coverage
FLEXIBLE
products tailored to your application
multiple technologies utilized to solve problems
individual customer focus
Let Specialty Polymers
find your solution
www.specpoly.com
1-800-770-7523
Come see us at ACS, Booth 1977
Sun Chemical
Technical Services
Sun Chemicals unparalleled global presence, backed with 17 research and development centers, allows for the delivery of local
service and support that is customized to the markets it serves.
Each manufacturing facility produces solutions tailor-made to
the specific needs of customers in each region, bringing them the
value and service they need to be competitive.
Sun Chemical
5020 Spring Grove Ave.
Cincinnati, OH 45232
United States
Tel: +1 513 681 5950 or +1 800 543 2323
E-mail: Steve.Hamilton@sunchemical.com
www.sunchemical.com
Date Founded
1830
Company Description
Sun Chemical is a leading producer of printing inks, coatings
and supplies, pigments, polymers, liquid compounds, solid
compounds, and application materials. Together with DIC,
Sun Chemical has annual sales of more than $7.5 billion and
over 20,000 employees with regional manufacturing in North
America, South America, Europe and Asia to support customers
around the world.
Markets Served and Technologies
Sun Chemical offers coatings formulators an extensive range
of innovative pigments, resins and additives. The Performance
Pigments group offers high performance, classical, effect pigments and preparations including Benda-Lutz metallic pigments and SunMICA pearlescent pigments. As the pioneer of
the commercial application of Quinacridone chemistry, Sun
Chemicals Quindo offerings are some of the most versatile on
the market. Sun Chemical also commercially developed bonding
technology, thereby enabling the widespread use of aluminum
and mica pigments in powder coatings applications.
Major Products
Quindo: As the market leader in Quinacridone pigments, Sun
Chemical provides more color options than anyone else.
Perrindo: Sun Chemicals perylene line sets the standard for
transparency and chroma giving formulators the tools to develop metallic colors with unprecedented depth and intensity.
Benda-Lutz MAXAL EC: These encapsulated aluminum pastes
designed for durable exterior architectural coatings are the industry-leading standard for chemical resistance, using state-ofthe-art EC encapsulation technology.
Benda-Lutz SPLENDAL: These microscopically thin aluminum
platelet suspensions are the first choice of premium brand owners wishing to create premium metallic brilliance for interior and
exterior coatings.
WATERSOL: A family of conventional and hybrid resin technologies designed to deliver high performance properties in waterborne coatings.
BURNOCK: A diverse line of crosslinkers and resins, including
polyester, acrylic, and phenolic resins, allow formulators to meet
the performance requirements of a broad range of applications.
Visit us at
booth #731
Call us today
Performance Pigments +1 800 543 2323
Advanced Materials
+1 973 404 6600
or visit www.sunchemical.com/ACS2016
Troy Corporation
HEADQUARTERS
8 Vreeland Road
P.O. Box 955
Florham Park, NJ 07932 USA
Tel: +1 (973) 443-4200 Email: marketing@troycorp.com
www.troycorp.com
Company Description
Troy Corporation is a global leader in performance materials
- principally preservatives and additives used in the manufacture of paint and coatings, building products, adhesives and
sealants, textiles, metalworking fluids, cosmetics, and personal
care products. Troy has served these industries with innovative,
value-added products for over sixty years. The companys
success in introducing new materials in anticipation of industry
needs has fueled expansion into new markets worldwide.
Troy invests significant resources in research and development to address emerging needs and is dedicated to providing
customers with continually improved products. Troy is positioned
to offer service to customers through a global network of technical support, complemented by local sales staff.
Troy has expanded its preservative offerings through the
acquisition of the Fungitrol, Nuosept, Bacillat, Bakzid,
Bodoxin, Cinon, Cleanguard, Ebotec, and Plastiguard
brands. With the addition of these product lines, Troys premier
portfolio of preservatives has been enhanced, delivering even
more value, performance, sustainability, and formulating flexibility to manufacturers worldwide.
MarketsServed
Troy operates modern manufacturing facilities in North America,
Europe, and Asia. Troy is recognized for providing a wide range
of high quality preservatives, additives, and specialty performance
products to customers in over 100 countries.
Troy manufacturing facilities are ISO 9001:2008 Certified,
indicating commitment to high quality. Troy also achieved ISO
14001:2004 certification of its Newark, New Jersey, USA manufacturing facility, recognition of the companys environmentally sound
manufacturing process. As a global manufacturer, Troy has reached
important milestones in extending its presence to markets around the
world with product recognition for quality, reliability, and value.
Technologies
Troy products improve coating properties, protect against product
spoilage in package, and resisting fungal and algal attack on the
applied coating surface. In the USA, Troy is the leading producer
of zero VOC (volatile organic compound) dry-film preservatives
offering protection against marring and premature failure due to
microbial attack. Additionally, Troy recently launched a new line
of highly efficient defoamers for aqueous systems and provided a
series of high performance substrate wetting agents capable of coating many difficult hydrophobic surfaces. Troy remains committed
to the ongoing pursuit of product innovation and the advance of
technology in the markets the company serves.
Troys experienced Technical Service staff provides customers with expert assistance to meet a diversity of challenges. Troy
utilizes the latest advances in performance materials research to
create unique solutions for customers from Technical Service
Centers in North America, Europe, and Asia.
Major Products
Polyphase
Troysan
Fungitrol
Mergal
Nuosept
Troykyd
Troythix
Troysol
Troysperse
Troymax
Powdermate
TroyCare
TroyGuard
OilMate
Dry-Film Preservatives
Dry-Film Preservatives
Dry-Film Preservatives
Wet-State Preservatives
Wet-State Preservatives
Defoamers
Rheology Modifiers
Pigment/Substrate Wetting
Flow & Leveling Additives
Dispersants
Driers, Metal Carboxylates,
& Anti-Skinning Agents
Powder Coating Additives
Preservatives for Personal Care
Preservatives for HI&I
Additives for the Energy Industry
Global Capabilities
Troy Chemie GmbH
Tel: +49 511 899 8830
Troy BV
Tel: +31 10 592 7494
www.troycorp.com
Dry-Film Preservatives
Wet-State Preservatives
Mergal Nuosept
Troy, Your Partner for Success now has more solutions than ever to meet your preservation
needs. With the recent acquisition of the Fungitrol and Nuosept brands, Troy offers
one of the broadest ranges of dry-film and wet-state preservatives in the marketplace
today, including the most effective active technologies currently available.
Visit www.troycorp.com to see how Troys premier portfolio of preservatives has been
enhanced, delivering even more performance, sustainability, and value.
Troy Corporation 8 Vreeland Road Florham Park, NJ USA 07932 973-443-4200 www.troycorp.com
U.S. HEADQUARTERS
Trust Chem USA, LLC
1050 Main Street, Suite 22,
East Greenwich, RI 02818 USA
Tel: (401) 398-7301
Fax: (401) 398-7321
E-mail: info@trustchemusa.com
Website: www.trustchemusa.com
Company Description
Trust Chem is an independent, privately owned company and the
biggest producer and exporter of organic pigment from China to
the world market. Trust Chem is the 4th largest manufacturer
and supplier of organic pigment in the world, with headquarters located in Hangzhou China. Subsidiaries in Europe, North
America, Australia, India and South Africa make Trust Chem a
true global supplier to the color industry.
Markets Served
As a manufacturer of organic pigments, Trust Chem serves the
Coatings, Plastic and Ink markets around the world. For Coatings, we offer many color indexes ranging from low to high performance to serve the OEM and Refinish Automotive Industries,
Industrial and Architectural markets, as well as Powder Coatings and Traffic Paint Industries. For Plastics, Trust Chem offers
pigments to the Masterbatch, Processor and Film Industries.
Major products
Trust Chem offers a large variety of color indexes. Major products are in the high performance yellow, orange and red area.
We offer a full range of HP Azo, Isoindolinone and Benzimidazolone pigments tailored for the Coatings and Plastic markets.
Our latest products are Disazo Condensation pigments including PY93, PY95 and PY128. More recently, we started offering
PY110 for the coatings industry.
Sales, Technical, European and Asian Contacts
Europe: Trust Chem Europe BV
Verlengde Kazernestraat 9
7417 ZA Deventer
The Netherlands
Tel: +31 (0) 570 662699
Fax: +31 (0) 570 662698
E-mail: info@trustchem.eu
Website: http://www.trustchem.eu
Asia: Trust Chem Co., Ltd. (Headquarters)
#4 Building, No. 208 Zhenzhong Road, Westlake
Economics Zone, Hangzhou, China 310030
Tel: + 86-571-8195 7777 ( 8 lines)
Fax: +86-571-8195 7500
E-mail: trust@mail.hz.zj.cn sales@trustchem.cn
Website: http://www.trustchem.cn
Technologies
In Trust Chems four manufacturing plants in Asia, we produce
a wide range of pigment technologies including Phthalocyanine
Pigments, Classical Azo, HPP Azo, Benzimidazolone, Disazo
Condensation, Anthraquinone, Isoindolinone, Isoindoline and
Quinacridone pigments.
Technical Services
Trust Chem has the largest independent laboratories in China,
where over forty full-time employees are responsible for quality control, product development and research. Trust Chem is
committed to fully register their manufactured pigments for
46 | Coatings World www.coatingsworld.com
Trust Chem
- A Unique Supplier
of Organic Pigment
Email: ADI@whchem.com
The Surface Materials Business Unit develops and manufactures high-quality environmentally friendly products.
PUD, PA, waterborne PU/PA hybrid dispersion (PUA), waterborne UV-cure PUD, hydroxyl-functionalized acrylic dispersion,
hydrophilically modified crosslinker, rheology modifier (HEUR,
ASE/HASE)
Tel: +86-535-3388077
Email: huangyue@whchem.com
The Specialty Amines Strategic Business Unit provides highquality specialty amine products and innovative solutions for
polyurethane, epoxy and polyamide customers.
WANAMINEMDA, WANAMINE H12MDA,WANAMINEIPDA,
WANALINK 6200
Tel: +86-535-3388000
Email: SAservice@whchem.com
Wanhua Petrochemical (Yantai) Co., Ltd. operates an integrated petrochemical industry chain.
Propylene, PO, AA, MA, EA, BA, 2-EHA, MTBE, NPG, N-BA
Tel: +86-535-3388000
Email: support@whchem.com
Univar Inc.
Univar Inc.
3075 Highland Parkway, Suite 200
Downers Grove, Illinois 60515
Tel: +1 331 777 6000
Fax: +1 855 888 8648
www.univar.com
Company Description
Founded in 1924, Univar is a global distributor of specialty and
basic chemicals, operating more than 700 distribution facilities
throughout North America, Western Europe, the Asia-Pacific
region, and Latin America and supported by a global network
of sales and technical professionals. With a broad portfolio of
products and value-added services, combined with deep technical and market expertise, Univar delivers the tailored solutions
customers need through one of the most extensive chemical
distribution networks in the world.
As a distributor, Univar plays an important role in the global
chemical value chain by providing a cost-effective way for producers to grow their diverse end markets and customer base.
Customers look to Univar to efficiently source chemicals from
multiple producers across many diverse chemistries, provide
specialized technical and industry expertise, as well as valueadded services such as repackaging, blending, waste management, and onsite chemical storage solutions to lower their total
cost of ownership.
Paint and Coatings
Univar takes a dedicated approach to serving the needs of the
global paint and coatings industry through a focused Coatings,
Adhesives, Sealants, and Elastomers (CASE) industry team.
With deep industry and product expertise, our dedicated CASE
specialists provide the market and formulation knowledge
manufacturers need to compete and grow in todays complex
market. Through our extensive network and global producer
partners, we offer a diverse line of specialty and basic coatings
technologies.
Resins
Pigments
Solvents
Thickeners
Dispersants
Additives
Acrylics
Polyurethanes
Titanium dioxide
Silicones
Coalescents
Plasticizers
Specialty amines
Fumed silica
And much more
Through our in-house lab capabilities, we partner with our producers to deliver the total solution to customer formulation challenges. Our market expertise enables us to work closely with
formulators and producers to offer new technologies, formulations, and scale-up support.
Key personnel and global capabilities
U.S.:
Christopher Ernst Senior Director, Coatings, Adhesives,
Sealants, Elastomers, Lubricants, and Metalworking
christopher.ernst@univarusa.com
Canada:
Joe Agocs Industry Development Manager, CASE
joe.agocs@univarcanada.com
Kamlaish Mudhar Manager, Supplier Relations, CASE Specialties
kamlaish.mudhar@univarcanada.com
Latin America:
Carlos Dorticos Business Manager, CASE
carlos.dorticos@univarmexico.com
EMEA:
Maurizio Poletti Industry Director, CASE
maurizio.poletti@univar.com
Nilay Midilli Commercial Manager, CASE
nilay.midilli@univar.com
Asia-Pacific
Tianwen Li - President, China
tianwen.li@univarchina.com
New Technologies
Visit www.univar.com for the latest information, new technologies, and updates.
Company
Capabilities 2016
C
2014
Yuen Liang
Industrial
Ashland
Inc. Co., Ltd.
Arochem Corporation.
HEADQUARTERS
No.922, Zhongxing Rd., Yanchao Dist., 82447 Kaohsiung, Taiwan
Tel.: +886-7-6161234 Fax #: +886-7-6160000
E-mail: sales@ylresin.com Web: www.ylresin.com
Company Introduction
Yuen Liang Industrial & Co Ltd. (a.k.a. YL), established in
1975, is a privately owned manufacturer of petroleum resins for
a wide range of industrial applications in Taiwan.
For the past thirty-seven years, YL has acquired the ability to
manufacture different kinds of C9 resin products to help
customers to their products better. To achieve this goal, YL
keeps investing in their research and development, enriching
employee training, broadening their after-sales services and
enhancing cooperation with various customers. YL's vision is to
grow with their precious customers everyday.
Product Application
YLs manufacturing and raw material flexibility allows them to
provide and supply products for various applications including
lithographic printing ink, gravure Ink, paint, hot melt adhesive,
contact adhesive, rubber compound, Color Asphalt, Wetter in
Plastics & Filler.
YLs research and development team is responsible for new
product development to meet the needs of customers and to
respond to market demands.
They also work with the technical service and manufacturing
teams to assist the customer and help them achieve optimum
application performance as well as helping the customer solve
technical problem. Together, research and development,
technical service and the manufacturing team provide material
qualification, feed blend qualification and assist in process
improvement and problem solving.
YL's market representatives are not only salespeople, each has
laboratory experience and is fully trained to know and
understand the complete line of YL products and their
application.
YLs products are global and are sold in such diverse places as
Europe, North and South America, the Middle and Far East,
Africa, and Asia.
Company Capabilities 2016 www.coatingsworld.com
Paint
Printing Ink
Adhesive
Rubber
Civil
Color Asphalt
Coatings World | 51