Professional Documents
Culture Documents
Especificaciones de Presión de La TA 2002 Nissan Sentra GXE
Especificaciones de Presión de La TA 2002 Nissan Sentra GXE
1. Check engine and transaxle fluid levels, and add fluid as necessary. Warm engine and transaxle to normal
operating temperature. Install pressure gauge to line pressure port. See Fig. 6 and Fig. 7 .
2. Set parking brake and block wheels. Apply foot brake fully while line pressure test at stall speed is
performed. Start engine and measure line pressure at idle and stall speed in "D", "2", "1" and "R"
positions. When measuring line pressure at stall speed, follow the stall speed test procedure. See STALL
SPEED TEST . Note pressure readings and refer to specifications. See LINE PRESSURE
SPECIFICATIONS table.
LINE PRESSURE SPECIFICATIONS
Application
At Idle
"D", "2" & "1" Positions
"R" Position
At Stall Speed
"D", "2" & "1" Positions
"R" Position
psi (kPa)
73 (500)
113 (778)
169 (1165)
263 (1813)
CB
mircoles, 12 de septiembre de 2012 07:01:08
07:01:00 p.m.
Page 1