This document contains measurements from an inspection report of bent parts. It lists 8 parts with their end dimensions, radius, circumference, center length on PCD, off angles at bevels, and end lengths. The measurements for each part's outer diameter and thickness are also provided at the bottom, noting they were found to be between certain millimeter ranges.
This document contains measurements from an inspection report of bent parts. It lists 8 parts with their end dimensions, radius, circumference, center length on PCD, off angles at bevels, and end lengths. The measurements for each part's outer diameter and thickness are also provided at the bottom, noting they were found to be between certain millimeter ranges.
This document contains measurements from an inspection report of bent parts. It lists 8 parts with their end dimensions, radius, circumference, center length on PCD, off angles at bevels, and end lengths. The measurements for each part's outer diameter and thickness are also provided at the bottom, noting they were found to be between certain millimeter ranges.
ALL DIMENSIONS ARE IN MM OFF ANGLE AT BEVEL RADIUS END CIRCUMFERENCE CENTER END 2 LENGTH ON PCD ANGLE END 1 620 620 1461 135 625 633 1473 135 622 617 1470 135 622 637 1480 135 4.5 618 632 1474 135 4.5 624 632 1477 135 620 627 1473 135 -
OD OF BENDS FOUND BETWEEN 72.5 MM TO 73.2 MM.
THCIKNESS OF BENDS FOUND BETWEEN 5.28 MM TO 5.40 MM