Add fluid through the filler tube until it drips out of the level tube, checking and renewing the seal if needed. Refit the plug and cap securely, then lower the vehicle and check for leaks, fixing any found before they become serious.
Add fluid through the filler tube until it drips out of the level tube, checking and renewing the seal if needed. Refit the plug and cap securely, then lower the vehicle and check for leaks, fixing any found before they become serious.
Add fluid through the filler tube until it drips out of the level tube, checking and renewing the seal if needed. Refit the plug and cap securely, then lower the vehicle and check for leaks, fixing any found before they become serious.
13 With the cap removed, pull out the filler tube plug then add the specified fluid
until it drips out of the level
tube. Check the condition of the seal on the level plug and renew it if necessary by cutting off the old seal and fitting a new one. Refit the plug and tighten to the specified torque. 14 Refit the filler tube plug and the new cap or cap securing clip. 15 Switch off the ignition then refit the engine undershield(s), tighten the retaining screws securely, and lower the vehicle to the ground. 16 Frequent need for topping-up indicates that there is a leak, which should be found and corrected before it becomes serious.