The document lists the tools needed to replace the flywheel and clutch on a VW Golf Mk 5, including specialized tools like a flywheel holding tool and clutch disk centering tool. It also lists other general tools needed such as sockets in various sizes, screwdrivers, jack stands, and bungee ropes. The operations section outlines disconnecting the battery by removing the ground cable first and removing the top engine cover.
The document lists the tools needed to replace the flywheel and clutch on a VW Golf Mk 5, including specialized tools like a flywheel holding tool and clutch disk centering tool. It also lists other general tools needed such as sockets in various sizes, screwdrivers, jack stands, and bungee ropes. The operations section outlines disconnecting the battery by removing the ground cable first and removing the top engine cover.
The document lists the tools needed to replace the flywheel and clutch on a VW Golf Mk 5, including specialized tools like a flywheel holding tool and clutch disk centering tool. It also lists other general tools needed such as sockets in various sizes, screwdrivers, jack stands, and bungee ropes. The operations section outlines disconnecting the battery by removing the ground cable first and removing the top engine cover.
The document lists the tools needed to replace the flywheel and clutch on a VW Golf Mk 5, including specialized tools like a flywheel holding tool and clutch disk centering tool. It also lists other general tools needed such as sockets in various sizes, screwdrivers, jack stands, and bungee ropes. The operations section outlines disconnecting the battery by removing the ground cable first and removing the top engine cover.
3. VW T10027: Tool for adjusting the gear selector
Note: This one is not required for the flywheel/clutch replacement.
4. A transmission jack. 5. An engine support.
Other tools needed:
1. Socket M21 (to unbolt the sub-frame bolt) 2. Torque wrench (up to 80 ft-lb/100 Nm) 3. Sockets: M18 deep (to unbolt the starter) 4. Triple Square Socket M12 (to unbolt the flywheel) 5. Triple Square Socket M8 (to unbolt the axles) 6. Allen Socket M5 (to unbolt the air filter box) 7. Socket M9 twelve points (to unbolt the pressure plate) 8. Sockets: TORX 20 and TORX 30 (to remove belly pan and lower right cover) 9. Sockets: M10, M13, M16, M17, M18 10. Spring clamp removal tool 11. Jack stands 12. Hydraulic jack (to support the differential) + factory jack (to move the engine away from the subframe) 13. Bungee ropes to hang the unbolted drive axles and few other things 14. Philips screwdriver 15. Rubber mallet OPERATIONS : 1. Disconnecting battery: