Professional Documents
Culture Documents
BSC6900 Configuration Principle (Global) (V900R015C00 - 09) (PDF) - en
BSC6900 Configuration Principle (Global) (V900R015C00 - 09) (PDF) - en
0 BSC6900
09
Date
2015-07-27
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Contents
Contents
1 Change History..............................................................................................................................1
2 Introduction....................................................................................................................................6
2.1 Overview........................................................................................................................................................................7
2.2 Version Difference.........................................................................................................................................................7
2.2.1 BSC6900 GSM Version Difference............................................................................................................................7
2.2.2 BSC6900 UMTS Version Difference..........................................................................................................................8
2.2.3 BSC6900 GU Version Difference...............................................................................................................................8
3 Application Overview................................................................................................................10
4 Product Configurations..............................................................................................................15
4.1 BSC6900 GSM Product Configurations.......................................................................................................................16
4.1.1 Hardware Capacity License Configurations..............................................................................................................16
4.1.2 Service Processing Units Configurations..................................................................................................................17
4.1.3 Interface Boards Configurations................................................................................................................................24
4.1.4 Clock Boards Configurations....................................................................................................................................29
4.1.5 General Principles of Configuring Boards in Slots...................................................................................................30
4.1.6 Subracks Configurations............................................................................................................................................31
4.1.7 Cabinets Configurations............................................................................................................................................33
4.1.8 Auxiliary Materials....................................................................................................................................................33
4.2 BSC6900 UMTS Product Configurations....................................................................................................................34
4.2.1 Impact of the Traffic Model on Configurations........................................................................................................35
4.2.2 Hardware Capacity License Configurations..............................................................................................................36
4.2.3 Service Processing Units Configurations..................................................................................................................39
4.2.4 Interface Boards Configurations................................................................................................................................43
4.2.5 Clock Boards Configurations....................................................................................................................................51
4.2.6 Principles for Board Configurations..........................................................................................................................51
4.2.7 Subracks Configurations............................................................................................................................................52
4.2.8 Cabinets Configurations............................................................................................................................................53
4.2.9 Auxiliary Materials....................................................................................................................................................54
4.2.10 Description of Restrictions......................................................................................................................................55
4.3 BSC6900 GU Product Configurations.........................................................................................................................56
4.4 Examples of Typical Configurations............................................................................................................................56
Issue 09 (2015-07-27)
ii
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Contents
6 Appendix.......................................................................................................................................91
6.1 Hardware Version.........................................................................................................................................................92
6.2 Traffic Model................................................................................................................................................................93
6.2.1 GSM Traffic Model...................................................................................................................................................93
6.2.2 UMTS Traffic Model.................................................................................................................................................94
6.3 GSM Ater RSL Configuration Calculation Tool..........................................................................................................98
6.4 Suggestions for GSM Lb Interface Configuration.......................................................................................................98
6.5 GSM Hardware Specifications.....................................................................................................................................98
6.5.1 Board Specifications..................................................................................................................................................98
6.5.2 Board Usage............................................................................................................................................................103
6.6 UMTS Hardware Specifications.................................................................................................................................104
Issue 09 (2015-07-27)
iii
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
1 Change History
Change History
09 (2015-07-27)
This is the ninth commercial release of V900R015C00.
Compared with Issue 08 (2014-12-29), this issue does not include any new topics.
Compared with Issue 08 (2014-12-29), this issue incorporates the following changes.
Content
Change Description
Compared with Issue 08 (2014-12-29), this issue does not exclude any topics.
08 (2014-12-29)
This is the eighth commercial release of V900R015C00.
Compared with Issue 07 (2014-09-12), this issue does not include any new topics.
Compared with Issue 07 (2014-09-12), this issue incorporates the following changes.
Add new board GCUb, GCGb, XPUc, SPUc and GOUe.
Compared with Issue 07 (2014-09-12), this issue does not exclude any topics.
07 (2014-09-12)
This is the seventh commercial release of V900R015C00.
Compared with Issue 06 (2014-06-09), this issue does not include any new topics.
Compared with Issue 06 (2014-06-09), this issue incorporates the following changes.
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
1 Change History
Content
Change Description
5.3 BSC6900 GU
Hardware Expansion
and Upgrade
Configurations
4.2.7 Subracks
Configurations
Compared with Issue 06 (2014-06-09), this issue does not exclude any topics.
06 (2014-06-09)
This is the sixth commercial release of V900R015C00.
Compared with Issue 05 (2014-04-30), this issue does not include any new topics.
Compared with Issue 05 (2014-04-30), this issue incorporates the following changes.
Content
Change Description
Compared with Issue 05 (2014-04-30), this issue does not exclude any topics.
05 (2014-04-30)
This is the fifth commercial release of V900R015C00.
Compared with Issue 04 (2014-03-28), this issue does not include any new topics.
Compared with Issue 04 (2014-03-28), this issue incorporates the following changes.
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
1 Change History
Content
Change Description
Added a table.
Compared with Issue 04 (2014-03-28), this issue does not exclude any topics.
04 (2014-03-28)
This is the fourth commercial release of V900R015C00.
Compared with Issue 03 (2014-01-20), this issue does not include any new topics.
Compared with Issue 03 (2014-01-20), this issue incorporates the following changes.
Content
Change Description
Compared with Issue 03 (2014-01-20), this issue does not exclude any topics.
03 (2014-01-20)
This is the third commercial release of V900R015C00.
Compared with Issue 02 (2013-06-16), this issue does not include any new topics.
Compared with Issue 02 (2013-06-16), this issue incorporates the following changes.
Issue 09 (2015-07-27)
Content
Change Description
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
1 Change History
Content
Change Description
Compared with Issue 02 (2013-06-16), this issue does not exclude any topics.
02 (2013-06-16)
This is the second commercial release of V900R015C00.
Compared with Issue 01 (2013-02-16), this issue does not include any new topics.
Compared with Issue 01 (2013-02-16), this issue incorporates the following changes.
Content
Change Description
3 Application Overview
Compared with Issue 01 (2013-02-16), this issue does not exclude any topics.
01 (2013-02-16)
This is the first commercial release of V900R015C00.
Compared with Draft A (2014-01-27), this issue includes the following new topics:
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
1 Change History
PEUc boards
Compared with Draft A (2014-01-27), this issue incorporates the following changes.
Content
Change Description
Compared with Draft A (2014-01-27), this issue excludes the following topics:
l
Draft A (2012-06-26)
This is a draft for V900R015C00.
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
2 Introduction
Introduction
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
2 Introduction
2.1 Overview
This document describes the configuration principles of the BSC6900 V900R015.
The BSC6900 supports three working modes: BSC6900 GSM, BSC6900 UMTS, and BSC6900
GU. Therefore, the BSC6900 applies to various application scenarios.
l
BSC6900 GSM indicates that the BSC6900 works in GSM only mode, providing the same
functions as the GSM BSC.
BSC6900 UMTS indicates that the BSC6900 works in UMTS only mode, providing the
same functions as the UMTS RNC.
BSC6900 GU indicates that the BSC6900 works in GSM&UMTS (GU) mode, providing
the same functions as the GSM BSC and UMTS RNC.
This document covers topics, such as product specifications, configuration principles, and
capacity expansion and upgrade configurations of the BSC6900 in three working modes.
HW60 R8 hardware: When using the HW60 R8 hardware, a BSC6000 or BSC6900 GSM
can be upgraded to BSC6900 V900R015 by upgrading software (version-by-version
upgrade may be required). The configuration principles and capacity expansion principles
remain unchanged after the upgrade. If only the software of a BSC6000 or BSC6900 GSM
is upgraded to BSC6900 V900R015, the capacity remains unchanged after the upgrade.
HW69 R11 hardware: When using the HW69 R11 hardware, a BSC6900 GSM can be
upgraded to BSC6900 V900R015 by upgrading software (version-by-version upgrade may
be required). The configuration principles and capacity expansion principles remain
unchanged after the upgrade. If only the software of a BSC6900 GSM is upgraded to
BSC6900 V900R015, the capacity remains unchanged after the upgrade.
HW69 R13 hardware: When using the HW69 R13 hardware, a BSC6900 GSM can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 GSM is upgraded to BSC6900 V900R015, the capacity remains unchanged
after the upgrade.
HW69 R15 hardware: When using the HW69 R15 hardware, a BSC6900 GSM can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 GSM is upgraded to BSC6900 V900R015, the capacity remains unchanged
after the upgrade.
The following sections describe the configuration principles of the BSC6900 GSM using HW69
R16 hardware.
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
2 Introduction
HW68 R11 hardware: When using the HW68 R11 hardware, a BSC6810 or BSC6900
UMTS can be upgraded to BSC6900 V900R015 by upgrading software (version-byversion upgrade may be required). The configuration principles and capacity expansion
principles remain unchanged after the upgrade. If only the software of a BSC6000 or
BSC6900 UMTS is upgraded to BSC6900 V900R015, the capacity remains unchanged
after the upgrade.
HW69 R11 hardware: When using the HW69 R11 hardware, a BSC6900 UMTS can be
upgraded to BSC6900 V900R015 by upgrading software (version-by-version upgrade may
be required). The configuration principles and capacity expansion principles remain
unchanged after the upgrade. If only the software of a BSC6900 UMTS is upgraded to
BSC6900 V900R015, the capacity remains unchanged after the upgrade.
HW69 R13 hardware: When using the HW69 R13 hardware, a BSC6900 UMTS can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 UMTS is upgraded to BSC6900 V900R015, the capacity remains unchanged
after the upgrade.
HW69 R15 hardware: When using the HW69 R15 hardware, a BSC6900 UMTS can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 UMTS is upgraded to BSC6900 V900R015, the capacity remains unchanged
after the upgrade.
SPUc, GOUe, GCUb and GCGb are introduced in HW69 R15 from patch version
R15C00SPC580. SPUc, GOUe, GCUb and GCGb can coexist with the corresponding old
boards SPUb, GOUc, GCUa, and GCGa.
The following sections describe the configuration principles of the BSC6900 UMTS using
HW69 R15 hardware.
Compared to V900R014, V900R015 BSC6900 products inherit the basic specifications.
A V900R015 BSC6900 UMTS supports the RNC in Pool feature to pool multiple RNCs, such
as BSC6900s only or BSC6900s and BSC6910s. RNCs in the resource pool share resources and
balance redundancies.
Issue 09 (2015-07-27)
HW60 R8/HW68 R11 hardware: When using the HW60 R8 hardware, a BSC6000,
BSC6810, or BSC6900 GU can be upgraded to BSC6900 V900R015 by upgrading software
(version-by-version upgrade may be required). The configuration principles and capacity
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
2 Introduction
expansion principles remain unchanged after the upgrade. If only the software of a
BSC6000 or BSC6900 GU is upgraded to BSC6900 V900R015, the capacity remains
unchanged after the upgrade.
l
HW69 R11 hardware: When using the HW69 R11 hardware, a BSC6900 GU can be
upgraded to BSC6900 V900R015 by upgrading software (version-by-version upgrade may
be required). The configuration principles and capacity expansion principles remain
unchanged after the upgrade. If only the software of a BSC6900 GU is upgraded to
BSC6900 V900R015, the capacity remains unchanged after the upgrade.
HW69 R13 hardware: When using the HW69 R13 hardware, a BSC6900 GU can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 GU is upgraded to BSC6900 V900R015, the capacity remains unchanged after
the upgrade.
HW69 R15 hardware: When using the HW69 R15 hardware, a BSC6900 GU can be
upgraded to BSC6900 V900R015 by upgrading software. The configuration principles and
capacity expansion principles remain unchanged after the upgrade. If only the software of
a BSC6900 GU is upgraded to BSC6900 V900R015, the capacity remains unchanged after
the upgrade.
NOTE
Note that if two boards work in active/standby mode, the two boards must be identical. To replace a singlecore board in a slot with a multi-core board, you must first remove the single-core board from the slot and
then insert the multi-core board into the slot.
The following BSC6900 UMTS boards can also be used in BSC6900 GSM mode (but these
GSM boards cannot be used in UMTS mode):
l
UMTS SPUc board with the same capacity as GSM XPUc board
UMTS DPUg board with the same capacity as GSM DPUg board
UMTS DPUb board with the same capacity as GSM DPUc or DPUd board
Issue 09 (2015-07-27)
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
3 Application Overview
Application Overview
The hardware platform of the BSC6900 is characterized by high integration, high performance,
and modular structure. These characteristics meet the networking requirements in different
scenarios and provide operators with a high-quality network at a low cost. In addition, the
network is easy to expand and maintain. Figure 3-1shows a single BSC6900 cabinet and Figure
3-2 shows its configuration.
Figure 3-1 BSC6900 N68E-22 cabinet
Issue 09 (2015-07-27)
10
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
3 Application Overview
Figure 3-2 Configuration of a BSC6900 cabinet (front view and rear view)
The following table describes the specifications of the BSC6900 V900R015 that adopts the
HW69 R15 hardware.
Issue 09 (2015-07-27)
11
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
3 Application Overview
Table 3-1 Specifications of the BSC6900 V900R015 that adopts the HW69 R15 hardware
Performance
Specifications
BSC6900
GSM
BSC6900
UMTS
Issue 09 (2015-07-27)
12
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
BSC6900
GU
3 Application Overview
Structural
Specifications
Power Supply
Specifications
Issue 09 (2015-07-27)
48 V DC
Input voltage range: 40 V to 57 V
13
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
3 Application Overview
NOTE
Issue 09 (2015-07-27)
14
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Product Configurations
Issue 09 (2015-07-27)
15
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
BSC6000
BSC6900
GBSS6.1/
GBSS7.0/
GBSS8.0/
GBSS8.1
GBSS9.0
GBSS12.0
GBSS13.0
GBSS14.0
GBSS15.0
HW60
R8
Supported
Supported
Supported
Supported
Supported
Supported
HW69
R11
Supported
Supported
Supported
Supported
Supported
HW69
R13
Supported
Supported
Supported
HW69
R15
Supported
NOTICE
If two boards work in active/standby mode, the two boards must be identical.
To replace a single-core board with a multi-core board, you must configure data related to board
removal and addition before replacing the board. Do not directly remove the single-core board
and then insert the multi-core board into the slot.
Section 4.1.1 Hardware Capacity License Configurations describes the configuration
principles of hardware capacity licenses. Sections 4.1.2 Service Processing Units
Configurations through 4.1.8 Auxiliary Materials cover the configuration principles of the
BSC6900 GSM hardware and relevant restrictions.
16
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Abbre
viatio
n
Name
Descriptio
n
Specification
Remarks
WP1D00
0DPU05
DPUf
CS Data
Processing
Unit
(1920CIC/
3840 IWF
(TDM&IP)/
7680IWF
(IP&IP))
Provides CS
service
processing
(including
the TC
function and
IWF
function)
and works in
N+1 backup
mode
TC function:
1920 CIC
circuits (A over
TDM)
For the TC
function, the
specification of
WP1D000DPU05
is 1920CIC when
non-wideband
AMR coding
schemes are used.
When wideband
AMR coding
schemes are used,
the specifications
of
WP1D000DPU05
are1/2 of those
listed in the left
column (960
CICs).
IWF function:
3840 channels
(Abis over IP
and Ater over
TDM, or Abis
over TDM and
A over IP)
7680 CIC
circuits (Abis
over IP and A
over IP)
Issue 09 (2015-07-27)
17
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Model
Abbre
viatio
n
Name
Descriptio
n
Specification
Remarks
WP1D00
0DPU06
DPUg
PS Data
Processing
Unit (1024
PDCH)
Provides PS
service
processing
and works in
N+1 backup
mode
1024 activated
PDCHs
The specifications
remain unchanged
regardless of the
coding schemes
(CS1 to CS4,
MCS1 to MCS9,
and EDGE+).
PS Data
Processing
Unit (1024
PDCH)
Provides PS
service
processing
and works in
N+1 backup
mode
1024 activated
PDCHs
Network
Intelligence
Unit
Provides
intelligent
service
identificatio
n
PS throughput:
50 Mbit/s
If the Gb
throughput is
higher than 50
Mbit/s, network
intelligence
throughput
licenses should be
configured.
Network
Intelligence
Throughput
License
Provides
intelligent
service
identificatio
n
PS throughput:
50 Mbit/s
One NIUa
provides 50 Mbit/s
PS throughput.
Extended
Processing
Unit (640)
Provides
signaling
processing
and works in
active/
standby
mode
GBTS:
The BHCA is
based on Huawei
default traffic
model.
WP1D00
0DPU03
WP1D00
0NIU00
DPUe
NIUa
QM1SNI
U50M00
WP1D00
0XPU03
XPUc
640 TRXs
640 Cells
The specifications
remain unchanged
regardless of the
coding schemes
(CS1 to CS4,
MCS1 to MCS9,
and EDGE+).
640 BTSs
3900 Erlang
1050K BHCA
eGBTS:
640TRX
640 Cells
640 BTSs
3900 Erlang
950K BHCA
Issue 09 (2015-07-27)
18
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Model
Abbre
viatio
n
Name
Descriptio
n
Specification
Remarks
WP1D00
0XPU03
XPUc
(XPUI)
GSM
eXtensible
Processing
Unit for
Computation
service
Provides the
IBCA
function and
works in
independent
mode
None
Calculated based
on IBCA
requirements at
network
deployment.
Generally, Two
WP1D000XPU03
s are configured by
default. (A
maximum of eight
WP1D000XPU03
s can be
configured based
on the network
requirements.)
WP1D00
0SPU03
SPUc
(NASP
)
Network
Assisted
Service
Process
Provides a
service
processing
unit to assist
the network
10 AC
The number of
QM1M000SPU00
is calculated based
on
"GBFD-511609In
telligent Wi-Fi
Detection and
Selection"
requirements at
network
deployment. One
QM1M000SPU00
is configured in
each BSC by
default.
NOTE
IWF: The inter-working function (IWF) implements transmission format conversion. When Abis over IP
and Ater over TDM or A over IP are used, the IWF performs format conversion between TDM and IP or
between IP and IP.
The following table describes the network requirements that should be considered during the
configuration of WP1D000DPU05(DPUf).
Issue 09 (2015-07-27)
19
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Remarks
Board
configurations are
affected by A over
IP transmission and
BM/TC separated
configuration mode
APortType
Issue 09 (2015-07-27)
MaxACICPerBSC,
WbAMRRate
Number of CIC
circuits on the A
interface (nonwideband AMR
coding scheme):
including the FR,
HR, and all types of
AMR coding
schemes
MaxACICPerBSC, (1
WbAMRRate)
Number of CIC
circuits on the A
interface (wideband
AMR coding
scheme): including
all types of
wideband AMR
coding schemes
MaxACICPerBSCTDM
Number of CIC
circuits on the A
interface when
TDM transmission
is used on the A
interface in BM/TC
combined or BM/
TC separated
configuration mode
20
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Remarks
MaxACICPerBSCIP
Number of CIC
circuits on the A
interface when IP
transmission is used
on the A interface
MaxIWFPerBSCTDMIP
Number of CIC
circuits in Abis over
IP and Ater over
TDM or in Abis over
TDM and A over IP
MaxIWFPerBSCIPIP
Number of CIC
circuits in A over IP
and Abis over IP
In BM/TC separated configuration mode (or TDM/IP hybrid transmission in A over IP)
On the BM side:
The number of DPUf to be configured depends on the number of CIC circuits that require
IWF conversion between TDM and IP and between IP and IP.
Number of DPUf = RoundUp( MAXIWFPerBSCTDMIP / 3840 + MAX
(MAXIWFPerBSCIPIP - MAXIWFPerBSCTDMIP, 0) / 7680,0)+1
On the TC side:
Number of DPUf = ROUNDUP(MaxACICPerBSCTDM/1920) + 1
2.
In BM/TC combined configuration mode (or TDM/IP hybrid transmission in A over IP)
The DPUf providing the TC function can support the IWF function of the same
specifications as DPUf.
Extra DPUf should be configured to provide the IWF function for the A-interface CIC
circuits in A over IP transmission.
Number of DPUf = RoundUp(MaxACICPerBSCTDM/ 1920,0) + RoundUp
( MAXIWFPerBSCTDMIP / 3840 + MAX (MAXIWFPerBSCIPIP MAXIWFPerBSCTDMIP, 0) / 7680,0)+1
3.
A over IP:
The number of DPUf to be configured depends on the number of CIC circuits that require
IWF conversion between TDM and IP and between IP and IP.
Number of DPUf = RoundUp(MAXIWFPerBSCTDMIP / 3840 + MAX
(MAXIWFPerBSCIPIP - MAXIWFPerBSCTDMIP, 0) / 7680,0) +1
4.
Issue 09 (2015-07-27)
21
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Description
Remarks
MaxActivePDCHPerBSC
If the PS function is configured, the number of DPUg to be configured depends on the number
of activated PDCHs that are configured. DPUg can work in N+1 backup mode.
Number of DPUg = ROUNDUP(MaxActivePDCHPerBSC/1024, 0) + 1
NOTICE
The number of PDCHs activated on each DSP of the DPUg cannot exceed 110.
Configuration principles of WP1D000NIU00 (NIUa) and QM1SNIU50M00:
The following table describes the network requirements that should be considered during the
configuration of WP1D000NIU00 and QM1SNIU50M00 (NIUa).
Item
Description
Remarks
Gb throughput
Issue 09 (2015-07-27)
Item
Description
Remarks
BHCA requirement
22
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Remarks
TRX Number
ERL Number
The number of XPUc to be configured depends on the total number of TRXs, BHCA
requirement, and CS traffic volume (Erlang) requirement.
If a BSC connects to GBTSs only:
Number of (XPUc) = 2*RoundUp(max[TRX Number/640, BHCA requirement /1050K, ERL
Number/3900], 0)
If a BSC connects to eGBTSs only:
Number of (XPUc) = 2*RoundUp( max[ TRX Number/640, BHCA requirement/950K,ERL
Number/3900], 0 )
If a BSC connects to GBTSs and eGBTSs:
Number of (XPUc) = 2*RoundUp( max ( TRX Number/640, BHCA requirement*GBTS TRX
Number/TRX Number/1050K + BHCA requirement*eGBTS TRX Number/TRX Number/
950K , ERL Number/3900), 0 )
The following table describes the network requirements that should be considered during the
configuration of WP1D000XPU03(XPUI).
Item
Description
Remarks
IBCA requirement
A pair of XPUI is configured by default. A maximum of three pairs of XPUI can be configured
based on the network requirements.
If the IBCA function is required, an extra pair of XPUc should be configured to work as XPUI.
The following table lists the network factors that must be considered during the configuration
of WP1D000SPU03 (NASP).
Issue 09 (2015-07-27)
23
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
comment
NASP Needs
Calculated based on
"GBFD-511609Intelligent WiFi Detection and Selection"
requirements at network
deployment. One NASP board is
configured in each BSC.
Abbreviat
ion
Name
Where to Apply
WP1D000EIU
00
EIUb
TDM transmission:
A/Ater/Abis/Lb
WP1D000OI
U01
OIUb
TDM transmission:
A/Ater/Abis/Lb
WP1D000PO
U01
POUc
TDM/FR:A/Ater/
Abis/Lb/Gb
IP:A/Abis/Lb
WP1D000PE
U01
PEUc
FR or IP
transmission: A/
Abis/Lb/Gb/Iur-g
WP1D000FG
201
FG2c
IP transmission: A/
Abis/Lb/Gb/Iur-g
WP1D000GO
U03
GOUe
IP transmission: A/
Abis/Lb/Gb/Iur-g
The following table lists the specifications of interface boards on different interfaces.
Issue 09 (2015-07-27)
24
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Transmissi
on Type
Port
Typ
e
Port
No.
Numb
er of
TRXs
Number
of CIC
circuits
(64 kbit/
s) on the
A
Interface
Numb
er of
CIC
circuits
(16
kbit/s)
on the
Ater
Interfa
ce
Gb
Through
put
(Mbit/s)
WP1D000
EIU00
(EIUb)
TDM
TD
M E1
32
384
960
3840
N/A
WP1D000
OIU01
(OIUb)
TDM
TD
M
CST
M-1
384
1920
7168
N/A
WP1D000
PEU00
(PEUc)
TDM
TD
M
CST
M-1
32
N/A
N/A
N/A
64
IP
IP E1
32
384
6144
N/A
N/A
TDM
TD
M
CST
M-1
512
7680
7168
504
IP
IP
CST
M-1
2048
23,040
N/A
N/A
WP1D000
FG201
(FG2c)
IP
FE/
GE
elect
rical
port
12/4
2048
23,040
N/A
1024
WP1D000
GOU03
(GOUe)
IP
GE
optic
al
port
2048
23,040
N/A
1024
WP1D000
POU01
(POUc)
Issue 09 (2015-07-27)
25
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
NOTE
In Abis over TDM, the EIUb supports a maximum of 384TRXs, the OIUb supports a maximum of 384
TRXs, and the POUc supports a maximum of 512 TRXs when all the following conditions are met:
l The EIUb/OIUb/POUc must be configured to work in active/standby mode. If these boards work in
independent mode, the number of TRXs supported needs to be reduced by half. For details, see the
RED parameter in the ADD BRD command.
l The traffic model is 5.86 Erlangs per TRX. Three PDCHs are configured on each TRX on the average
and the MCS-7 is used, or two PDCHs are configured on each TRX on the average and the MCS-9 is
used.
l In fixed Abis networking, idle timeslots and monitoring timeslots must be properly configured.
Otherwise, the number of TRXs supported by the EIUb/OIUb/POUc cannot reach the maximum
specification.
After the VAMOS feature is enabled, extra Abis bandwidth is required, which also affects the TRX
specifications of interface boards.
Sub_Item
Description
Remarks
AbisTRXNum
ber
TRXNoTDME
1
TRXNoIPE1
Determined
based on the
network plan
TRXNoTDMS
TM1
TRXNoIPSTM
1
AbisTDME1N
o
AbisIPE1No
AbisPortNum
ber
Issue 09 (2015-07-27)
Calculated
based on the
traffic model
26
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Item
4 Product Configurations
Sub_Item
Description
AbisTDMSTM
1No
AbisIPSTM1N
o
Remarks
The number of Abis interface boards to be configured is determined based on the number of TRXs
and the number of ports. If a base station uses TDM transmission on the Abis interface, the base
station requires one E1 port by default.
If Abis over TDM is used, either of the following conditions must be met:
l Active/standby mode: Number of TRXs supported by the TDM interface board x
(Average number of Erlangs per TRX + Average number of PDCHs per TRX x Number
of timeslots required for PS transmission) 7680
l Independent mode: Number of TRXs supported by the TDM interface board x (Average
number of Erlangs per TRX + Average number of PDCHs per TRX x Number of
timeslots required for PS transmission) 4096
The following table lists the number of timeslots required for PS transmission.
Issue 09 (2015-07-27)
Value
CS-1
CS-2
CS-3
CS-4
MCS-1
MCS-2
MCS-3
MCS-4
MCS-5
MCS-6
27
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Value
MCS-7
MCS-8
MCS-9
For example:
l Assume that the POUc supports 512 TRXs, the average number of Erlangs per TRX is
5.86, the average number of PDCHs per TRX is 3, and the number of timeslots required
for PS transmission is 3 when MCS-7 is used. Then, the calculation result is 7608, which
is less than 7680.
l Assume that the POUc supports 512 TRXs, the average number of Erlangs per TRX is
5.86, the average number of PDCHs per TRX is 4, and the number of timeslots required
for PS transmission is 4 when MCS-9 is used. Then, the calculation result is 11192,
which is greater than 7680. Therefore, the number of TRXs supported by the POUc
should be reduced to 351.
2.
Sub_Item
Description
Remarks
ACICNumber
MaxACICPe
rBSCTDM
Calculated based on
the traffic model
MaxACICPe
rBSCIP
If the A interface supports multiple transmission modes, then the number of interface boards of each
type should be calculated.
3.
Issue 09 (2015-07-27)
28
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
The following table describes the network requirements that should be considered during
the configuration of Ater interface boards.
Item
Sub_Item
Description
Remarks
AterCICNum
ber
MaxAterCICPe
rBSC
Calculated based on
the traffic model
If the Ater interface supports multiple transmission modes, then the number of interface boards of
each type should be calculated.
4.
You can first select the types of interface board based on the network plan. The number of
required Gb interface boards can be calculated based on the service capability (bandwidth
supported).
The following table describes the network requirements that should be considered during the
configuration of Gb interface boards.
Item
Sub_Item
Description
Remarks
GbThroughput
GbFRTputPerBSC
Calculated based on
the traffic model
GbIPTputPerBSC
If the Gb interface supports multiple transmission modes, then the number of interface boards of each type
should be calculated.
Issue 09 (2015-07-27)
29
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Abbreviatio
n
Name
Function
WP1D000GCU02
GCUb
Provides general
clock signals
QW1D000GCG02
GCGb
Interface boards and service processing units should be distributed as evenly as possible
among subracks. This reduces the consumption of processor resources and switching
resources by inter-subrack switching. Interface boards can be configured only in rear slots,
and service processing units can be configured in front or rear slots. It is recommended that
service processing units be configured in front slots.
Under a BSC, A interface boards, Ater interface boards, Abis interface boards, XPUc,
DPUf, and DPUg should all be distributed as evenly as possible among subracks.
Configuring the same type of board in the same subrack lowers system reliability.
2.
If POUc boards are used as A interface boards, DPUf should be configured in proportion
to the number of POUc boards in the same subrack. In full configuration, the ratio of the
number of pairs of POUc boards to the number of DPUf should be 1:4 in the same subrack,
and the maximum ratio should be 1:2. If the traffic volume is small, a pair of POUc boards
and one DPUf can be configured in a subrack.
3.
No.7 signaling links should be configured on different A and Ater interface boards. This
reduces the impact of transmission faults and board faults on the system.
Issue 09 (2015-07-27)
30
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
If there are multiple pairs of No.7 signaling links, distribute them evenly among interface
boards based on the quantities of A and Ater interface boards. In principle, the bandwidth
of the signaling links carried on a pair of single-core interface boards cannot exceed 2 Mbit/
s, and the bandwidth of the signaling links carried on a pair of multi-core interface boards
cannot exceed 8 Mbit/s.
For stability purposes, at least two No.7 signaling links need to be configured.
4.
The number of XPU boards used for signaling processing should not exceed 20 pairs. The
number of XPUI boards used for implementing the IBCA function should not exceed eight.
5.
It is recommended that one MPU be configured for each two pairs of XPUc.
6.
1.
2.
3.
The clock processing boards are always configured in slots 12 and 13 of the MPS.
4.
The SCUb boards are always configured in slots 6 and 7 of the MPS and EPS.
5.
The SAUc board is always configured in a slot of the MPS. A maximum of one SAUc is
configured and board redundancy is not required. MPS need reserves one slot for SAUc.
NOTE
MPU is a logical unit of XPU board, MPU work as a management function for all other boards and
transferring function for the internal signaling.
Issue 09 (2015-07-27)
31
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Abbrevi
ation
Name
Function
QM1P00UMPS01
MPS
Main processing
subrack
QM1P00UEPS01
EPS
Extended processing
subrack
WP1D000TNU01
TNUb
TDM switching
WP1X000OMU02
OMUc
Operation and
Maintenance Unit
WP1D000SAU01
SAUc
WP1D000SCU01
SCUb
GE Switching network
and Control Unit
All interface boards must be configured in the rear slots of an EPS. Service processing units
can be configured in the front or rear slots of an EPS.
10 rear slots of the GSM MPS are used to house GSM service processing units and interface
boards, and 8 front slots are used to house GSM service processing units.
14 rear slots of a GSM EPS are used to house GSM service processing units and interface
boards, and 10 front slots are used to house GSM service processing units.
The number of GSM subracks is calculated based on the number of service processing units and
the number of interface boards.
Number of GSM_EPSs = MAX((Total number of interface boards Number of slots for
interface boards in MPS)/14, (Total number of interface boards + Total number of service
processing boards Total number of slots in MPS)/24)
The number of slots for interface boards in the MPS is 10, and the total number of slots in the
MPS is 18. If no TNUb board is configured, the total number of slots in the MPS is 20. The
number of slots for interface boards in an EPS is 14, and the total number of slots in the MPS is
24. If no TNUb board is configured, the total number of slots in an EPS is 26.
Issue 09 (2015-07-27)
32
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Name
Function
WP1B4PBCBN00
BSC6900 Cabinet
Cabinet
Name
Function
QW1P8D442000
Trunk Cable
QW1P8D442003
Trunk Cable
QW1P0STMOM00
QW1P00GEOM00
GE Optical Connector
GE optical unit
QW1P0FIBER00
Optical Fiber
Optical cable
QW1P0000IM00
Installation Material
Package
QMAI00EDOC00
Documentation
Electronic documentation
Issue 09 (2015-07-27)
33
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
NOTE
One trunk cable provides eight E1s. 32 E1s/8 E1s = 4. A trunk cable is a Y-shaped cable, which is
connected to both the active and standby boards.
One trunk cable provides eight E1s. 32 E1s/8 E1s = 4. A trunk cable is a Y-shaped cable, which is
connected to both the active and standby boards.
34
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Issue 09 (2015-07-27)
35
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
16
40
64
128
196
448
90
250
300
430
530
800
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (0, 16], PS Throughput
Capacity per DPUe(Mbps) = PS RAB Mean data rate * 5.625;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (16, 40], PS Throughput
Capacity per DPUe(Mbps) = 90+(PS RAB Mean data rate 16)* 6.67;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (40, 64], PS Throughput
Capacity per DPUe(Mbps) = 250 + (PS RAB Mean data rate 40) * 2.08;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (64, 128], PS Throughput
Capacity per DPUe(Mbps) = 300 + (PS RAB Mean data rate 64) * 2.03;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (128, 196], PS Throughput
Capacity per DPUe(Mbps) = 430 + (PS RAB Mean data rate 128) * 1.47;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (196, 448], PS Throughput
Capacity per DPUe(Mbps) = 530 + (PS RAB Mean data rate 128) * 1.07;
If PS RAB Mean data rate in active state (UL+DL)(kbps) ranges (448, ], PS Throughput
Capacity per DPUe(Mbps) = 800.
l
36
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
details about how to calculate the number of licenses to be configured, see section 4.2 BSC6900
UMTS Product Configurations.
The hardware capacity license (165 Mbit/s) and hardware capacity license (300 Mbit/s) are
superposed on the hardware capacity of the DPUe hardware (335 Mbit/s) to increase the userplane processing capabilities.
The Network Intelligence Throughput license is superposed on the hardware capacity of the
NIUa board (50 Mbit/s) to provide service awareness when any of the following features is
enabled: WRFD-020132 Web Browsing Acceleration, WRFD-020133 P2P Downloading Rate
Control.
l
1. When the number of configured hardware capacity licenses is smaller than the number of
configured DPUe boards, hardware capacity licenses can be shared among the DPUe boards of
a single BSC6900 UMTS to form a resource pool and improve resource utilization. In BSC6900
V900R015, each DPUe supports a maximum PS throughput of 800 Mbit/s.
2. Hardware capacity licenses are not automatically moved with hardware. For example, when a
DPUe is moved from one BSC6900 UMTS to another, its hardware capacity licenses are not
moved.
Assume that two DPUe boards are configured. The following table compares the PS
throughput before and after hardware capacity licenses are configured.
Comparison of the PS throughput before and after hardware capacity licenses are
configured
Issue 09 (2015-07-27)
37
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Number of
Configured
WP1D000DPU03s
(DPUe)
Number of
Configure
d
Hardware
Capacity
Licenses
(165 Mbit/
s)
User Plane
Processing
Capability
(Mbit/s/
Erlang)
Number of
Configured
Hardware
Capacity
Licenses (300
Mbit/s)
User Plane
Processing
Capability
(Mbit/s/
Erlang)
670/6700
670/6700
835/6700
835/6700
1135/6700
1000/6700
1300/6700
1600/6700
1000/6700
NOTE
l User plane processing capability (Mbit/s/Erlang): indicates the maximum processing capability
of DPUe boards that process either CS services or PS services. Take two DPUe boards configured
for example. When the user plane processing capability is 670/6700 (Mbit/s/Erlang):
If the two DPUe boards process only PS services, the processing capability of the DPUe boards
is 670 Mbit/s.
If the two DPUe boards process only CS services, the processing capability of the DPUe boards
is 6700 Erlang.
If the two DPUe boards process both PS services and CS services, the two DPUe boards can meet
the user plane capacity requirements when the following condition is fulfilled:
CS traffic volume in the network/6700 Erlang + PS throughput in the network/670 Mbit/s <= 1
Two hardware capacity licenses (165 Mbit/s) and two hardware capacity licenses (300
Mbit/s) must be added to meet the user plane capacity requirements if the following
condition is fulfilled:
CS traffic volume in the network/6700 Erlang + PS throughput in the network/1600 Mbit/
s <= 1
Minimum hardware should be configured in a BSC6900 on the precondition that the
network capacity requirements are met. Therefore, hardware capacity licenses are
preferentially configured before more hardware is added.
It is necessary to be emphasized that, with the development of mainstream smart phone
network, there are numerous small packets transferred in the user plane. The hardware
throughput capacity of DPUe might be in a relatively lower range, eg, not exceeds 335Mbit/
s contained by DPUe board. In this case, the Hardware Capacity License(165Mbps) and
Hardware Capacity License (300Mbps) will not work and should not be configured. So,
the configuration of these two hardware licenses depends on the real hardware throughput
capacity of DPUe in the specific traffic model.
l
Issue 09 (2015-07-27)
38
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
The network intelligence throughput license is applicable to the HW69 R13, and HW69
R15 hardware.
This license can be configured for a network intelligence unit NIUa(WP1D000NIU00) to
increase the Service awareness processing capability. A maximum of 63 network
intelligence throughput licenses can be configured for one NIUa. Network intelligence
throughput licenses can be shared among the NIUa boards of a single BSC6900 UMTS.
That is, network intelligence throughput licenses form a resource pool and are not bound
to specific boards. In RAN15.0, each NIUa provides a maximum PS throughput of 3200
Mbit/s. Network intelligence throughput licenses are not automatically moved with
hardware. For example, when a NIUa is moved from one BSC6900 UMTS to another, its
network intelligence throughput licenses are not moved.
Issue 09 (2015-07-27)
Model
Abbre
viatio
n
Name
Function
Specification
Condition
WP1D00
0DPU03
DPUe
Data
Processing
Unit (335
Mbit/s/
3350
Erlang)
Data
processin
g
PS Throughput
335 Mbit/s or
3350 Erlang, 300
cells, and 5880
active users
Real PS throughput of
DPUe is based on the
real traffic model.
QM1SH
W165M0
0
Hardware
Capacity
License
(165 Mbit/
s)
Data
processin
g
PS throughput:
165 Mbit/s
The configuration of
this item should be
based on the real
hardware capacity of
DPUe which can be
estimated from traffic
model.
QM1SH
W300M0
0
Hardware
Capacity
License
(300 Mbit/
s)
Data
processin
g
PS throughput:
300 Mbit/s
The configuration of
this item should be
based on the real
hardware capacity of
DPUe which can be
estimated from traffic
model.
39
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Model
Abbre
viatio
n
Name
Function
Specification
Condition
WP1D00
0NIU00
NIUa
Network
Intelligenc
e Unit
Intelligent
service
identificat
ion
Hardware
capacity: 3200
Mbit/s
Network
Intelligenc
e
Throughpu
t License
Intelligent
service
identificat
ion
PS throughput:
50 Mbit/s
Optional
Signaling
Processing
Unit
Signaling
processin
g
124,000 BHCA,
180 NodeBs, 600
cells, and 9000
active users,
24000 on-line
users
QM1SNI
U50M00
QM1M0
00SPU00
/
QM1M0
00SPU03
SPUb/
SPUc
PS throughput
provided by the
NIUa hardware:
50 Mbit/s
NOTE
1.
Issue 09 (2015-07-27)
Item
Description
Remarks
Iub PS
throughput
40
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Remarks
Iub CS traffic
Active users
Cell number
a.
A minimum of two DPUe boards can be configured. A maximum of 50 DPUe boards can be
configured.
41
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
2.
3.
Issue 09 (2015-07-27)
Item
Description
Remarks
BHCA requirement
Active users
On-line users
42
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Remarks
NodeB number
Cell number
a.
b.
Issue 09 (2015-07-27)
Model
Abbre
viatio
n
Name
Wher
e to
Apply
Session
Setup/
Release
Times
CID/
UDP
(Activ
e
users)
WP1D000AEU00
AEUa
ATM Interface
Unit (32 E1)
Iub
500
23,000
WP1D000PEU00
PEUc
IP Interface Unit
(32 E1)
Iub
500
23,000
43
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Model
Abbre
viatio
n
Name
Wher
e to
Apply
Session
Setup/
Release
Times
CID/
UDP
(Activ
e
users)
WP1D000AOU01
AOUc
ATM Interface
Unit (4 STM-1,
Channelized)
Iub
5000
79,000
WP1D000POU01
POUc
IP Interface Unit
(4 STM-1,
Channelized)
Iub
5000
129,000
WP1D000UOI01
UOIc
ATM Interface
Unit (8 STM-1,
Unchannelized)
Iub/Iu/
Iur
5000
79,000
WP1D000GOU01
/
WP1D000GOU03
GOUc/
GOUe
IP Interface Unit
(4 GE, Optical)
Iub/Iu/
Iur-p
5000
129,000
WP1D000FG201
FG2c
5000
129,000
note
IP Interface Unit
(12 FE/4 GE,
Electrical)
Iub/Iu/
Iur-p
note
NOTE
The Iur-p is a private interface connecting RNCs to facilitate the RNC in Pool feature.
Model
Issue 09 (2015-07-27)
Node
B
Voice
(Erlan
g)
VP
(Erlan
g)
UL
(Mbit/s)
DL
(Mbit/s)
UL+DL
(Mbit/s)
WP1D000AEU00
2800
680
45
45
90
32
WP1D000PEU00
2800
850
60
60
120
32
WP1D000AOU01
18,00
0
5500
300
300
600
500
WP1D000POU01
18,00
0
6000
400
400
800
252
WP1D000UOI01
18,00
0
9000
800
800
1200
500
44
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
WP1D000GOU01
/
WP1D000GOU03
/WP1D000FG201
4 Product Configurations
18,00
0
9,000
2600
2600
2600
500
Iu-CS
Iu-PS
Voice
(Erlang
)
VP
(Erlang
)
UL
(Mbit/
s)
DL
(Mbit/
s)
UL+DL
(Mbit/
s)
IU PS Online Users
(TEID)
WP1D000UOI01
18,000
9000
900
900
1800
200,000
WP1D000GOU0
1/
WP1D000GOU0
3/
WP1D000FG201
18,000
9000
3200
3200
3200
200,000
NOTE
l The specifications UL (Mbit/s), DL (Mbit/s), and UL+DL (Mbit/s) listed in Table 3-4 and Table
3-5 are based on the traffic type DL/UL64/384 kbit/s.
l One active CS user consumes two CIDs/UDPs, and one active HSPA PS user consumes three
CIDs/UDPs.
l One active CS user consumes one Iu-CS CID/UDP, and one active PS user consumes one Iu-PS
TEID(Tunnel Endpoint ID).
l The number of session setups/releases indicates the signaling processing capability of interface
boards and is applicable to the Iub and Iu interfaces. The following table lists the mapping
between the interface signaling processing requirements and the traffic model.
Table 4-14 Session setup/release times in Iub/Iu for every signaling procedure in traffic
model
Issue 09 (2015-07-27)
Unit
Iub session
setup / release
times
Iu-PS session
setup/release
times
times
times/call
times
45
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Unit
Iub session
setup / release
times
Iu-PS session
setup/release
times
times/call
times/call
0.5
times/call
0.5
times/per
subscriber
NOTE
The specifications of interface boards on the Iur interface are the same as those of interface boards
on the Iub interface.
The processing capability specifications of each interface board are the maximum specifications
when the interface board processes only the corresponding type of service. The configured
specifications are listed in the "NodeB" column.
2.
The following table describes the network requirements that should be considered during the
configuration of interface boards.
Issue 09 (2015-07-27)
Interface
Item
Description
Remarks
Iub
Iub transmission
type
Determined based on
the network plan
Iub PS throughput
Iub CS traffic
46
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Interface
Iu-CS
Iu-PS
4 Product Configurations
Item
Description
Remarks
NodeB number
Determined based on
the network plan
Iu-CS transmission
type
Determined based on
the network plan
Iu-CS CS traffic
Iu-PS transmission
type
Determined based on
the network plan
Iu-PS throughput
The number of interface boards required on the Iub interface can be calculated in the
following way:
The Iub interface can use any of the following transmission modes:
Case 1: hybrid Iub - E1 (ATM) && Iub-Ethernet (IP);
Case 2: hybrid Iub - E1 (IP) && Iub-Ethernet (IP);
Case 3: hybrid Iub - VC12-STM-1 (ATM) && Iub-Ethernet (IP);
Issue 09 (2015-07-27)
47
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
The Iur, Iu-CS, and Iu-PS interfaces can use any of the following transmission modes:
Case 1: VC4-STM-1 (ATM);
Case 2: GE Electrical (IP);
Case 3: GE Optical (IP);
The numbers of required Iur, Iu-CS, and Iu-PS interface boards can be calculated on the
basis of any of the following four aspects: service processing capability (Erlang and payload
Issue 09 (2015-07-27)
48
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
49
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
In 1+1 backup mode, the actual number of interface boards required is twice the
number calculated according to the network capacity requirements.
The number of interface boards is the sum of interface boards required on the Iub, IuCS, Iu-PS, and Iur interfaces, SUM(N_IUB_INT, N_Iu-CS_INT, N_Iu-PS_INT,
N_Iur)*2
b.
The BSC6900 UMTS supports the N+1 backup mode on only the FG2c and GOUc/
GOUe boards with resource pools enabled.
If Iu-CS Iu-PS Iur share the interface board, the number of interface boards should be
calculated from: ROUNDUP(N_IUB_INT, 0)+1, ROUNDUP[SUM(Iu-CS, Iu-PS,
Iur, 0)] +1.
Issue 09 (2015-07-27)
50
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Abbreviatio
n
Name
Function
WP1D000GCU01/
WP1D000GCU02
GCUa/GCUb
QW1D000GCG01/
QW1D000GCG02
GCGa/GCGb
GPS&Clock Processing
Unit
The GCUa(GCUb) is optional. When a BSC6900 UMTS does not use GPS clock signals, a pair
of general clock units can be configured for the BSC6900 UMTS.
The GCGa(GCGb) is optional. When a BSC6900 UMTS needs to use GPS clock signals, a pair
of GPS&clock processing units can be configured for the BSC6900 UMTS.
2.
3.
The SCUb boards must be configured in slots 6 and 7 of the MPS and EPS.
4.
5.
Interface boards can be configured only in slots 14 to 27 (except slots 24 and 25 in the
MPS).
6.
Service processing units and interface boards must be distributed evenly among subracks
to reduce the CPU and swapping resources consumed during inter-subrack switching and
avoid the inter-subrack bandwidth limiting the traffic volume. Assume that there are 9
DPUe boards, 12 SPUb(SPUc) boards, 6 interface boards, and 3 subracks. Then, it is
recommended that 3 DPUe boards, 4 SPUb(SPUc) boards, and 2 interface boards be
configured in each subrack.
7.
The SPU boards must be configured in active/standby mode. The DPU and NIU boards
must be configured in load sharing mode by using a resource pool. The OMU, SCU, and
GCU/GCG boards must be configured in active/standby mode. Two slots must be reserved
for the SAU boards (one or two SAU can be configured).
8.
The MPS supports a maximum of 9 pairs of SPU boards and 9 DPUe boards.
9.
The EPS supports a maximum of 9 pairs of SPU boards and 9 DPUe boards.
10. It is recommended that the SAU be configured in the MPS with two slots reserved.
11. It is recommended that the Iur-P interface board used for the RNC In Pool feature be
configured in the MPS.
Issue 09 (2015-07-27)
51
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
For the actual configuration operation, see Examples of Typical Configurations in section 4.4.2
BSC6900 UMTS Examples of Typical Configurations.
Abbrevia
tion
Name
QM1P00UMPS01
MPS
QM1P00UEPS01
EPS
WP1X000OMU02
OMUc
WP1D000SAU01
SAUc
WP1D000SCU01
SCUb
Issue 09 (2015-07-27)
52
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
The default number of SAU board is one for EBC. If the customer has purchased and used
Huawei Nastar or other OSS feature such as SON, one or two SAUc boards need to be
configured in the MPS of the BSC6900. The number of SAUc boards is up to OSS.
2.
Configuration Scenarios
Number of SAU
boards (pcs)
Nastar Only
Name
Function
WP1B4PBCBN00
BSC6900 cabinet
Cabinet
2.
Issue 09 (2015-07-27)
53
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Name
Function
QW1P8D442000
Trunk Cable
QW1P8D442003
Trunk Cable
QW1P0STMOM00
QW1P00GEOM00
GE Optical Connector
GE optical unit
QW1P0FIBER00
Optical Fiber
Optical cable
QW1P0000IM00
Installation Material
Package
QMAI00EDOC00
Documentation
Electronic documentation
One trunk cable provides eight E1s. 32 E1s/8 E1s = 4. A trunk cable is a Y-shaped cable, which is connected
to both the active and standby boards.
One trunk cable provides eight E1s. 32 E1s/8 E1s = 4. A trunk cable is a Y-shaped cable, which is connected
to both the active and standby boards.
Issue 09 (2015-07-27)
54
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Issue 09 (2015-07-27)
Subrac
k
SPUc
(pair)
DPUe
(pcs)
NIUa(pcs)
Iub GOUe
(pair)
Iu GOUe
(pair)
SAUc
(pcs)
MPS
EPS1
EPS2
EPS3
EPS4
EPS5
55
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Subrac
k
SPUc
(pair)
DPUe
(pcs)
NIUa(pcs)
Iub GOUe
(pair)
Iu GOUe
(pair)
SAUc
(pcs)
Total
12
15
GSM boards and UMTS boards should not be configured in the same subrack.
2.
One to four GSM subracks can be configured. One to five UMTS subracks can be
configured.
3.
The total number of GSM and UMTS subracks should be smaller than or equal to six.
4.
5.
When the BM/TC separated configuration mode is used, the MPS must work in GSM mode.
6.
The NIUa board providing the service awareness function can be shared between GSM and
UMTS and be configured both on the GSM and UMTS side.
7.
Zero, one or two SAU boards can be configured in the BSC6900 GU mode.
56
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
An example is given here. The input information is listed in the following table.
Issue 09 (2015-07-27)
Network Parameter
Value
TRX QTY
1024
HR Ratio
50%
A Erl: Um Erl
80%
Gos in Um interface
0.02
Gos in A interface
0.001
100,000
Built-in PCU
yes
Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd.
57
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Network Parameter
Value
Separated
No
No
Step 2 Dimension.
Dimensioning will be carried out from three dimensions, as shown in the following figure.
Item
Name
Specification
A1
Abis E1 quantity
A2
A CIC quantity
A3
IWF quantity
A4
BHCA
A5
Gb
A6
Step 3 Obtain the network capacity requirement to calculate the hardware requirement.
Issue 09 (2015-07-27)
Item
Name
Configuration Before
the Capacity
Expansion
B1
B2
58
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Name
Configuration Before
the Capacity
Expansion
B3
B4
Interface boards
B5
Cabinets
B6
----End
Issue 09 (2015-07-27)
Network Parameter
Value
Total subscribers
800,000
Total NodeBs
600
Total cells
3000
0.02
75
0.96
0.3
52
0.3
59
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Network Parameter
Value
4500
3.6
IP GE
IP GE
8%
Yes
Yes
Yes
60
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
l Total Active users requirement (based on sample input, the value is 39,111) = Total
Subscribers x [Mean holding time (MHT) in DCH/H/FACH state per PS call (sec) x PS call
per subscriber per BH/3600 + Voice Traffic per CS voice subscriber in BH (Erlang)] =
800000 x (52 x 2/3600 + 0.02) = 39,111
l Total Iub CID/UDP requirement(based on the sample input, the value is 124,800) = Total
Subscribers x {Mean holding time (MHT) in DCH/H/FACH state per PS call(sec) x PS call
per subscriber per BH/3600 x [1 + 2 x (1+Proportion of SHO for PS call)] + Voice Traffic
per CS voice subscriber in BH (Erlang) x 2 x (1 + Proportion of SHO for CS call)} = 800000
x {52 x 2/3600 x [1 + 2 x (1 + 0.3)] + 0.02 x 2 x (1 + 0.3)} = 124,800
Total Iub Session setup/release times requirement (based on the sample input, the value is
10,951 times/s) = Total Subscribers x [PS call per subscriber per BH x (3 + Handover times
per PS call x 2 + PS channel switch times per PS call x 1 + Cell update times per PS call x
0) + CS voice call per subscriber per BH x (2 + Handover times per CS call x 2)]/3600 =
800000 x [2 x (3 + 5 x 2 + 3 x 1) + 0.96 x (2 + 8 x 2)]/3600 = 10,951
l Under this traffic model, the BHCA supported by each SPUc only board is 114,578:
CP Load per subscriber (unit: CPU usage) = [CS voice call per subscriber per BH x (W1 +
Handover times per CS call x W2) + PS call per subscriber per BH x (w3 + PS channel switch
times per PS call x w7 + Cell update times per PS call x w8 + Handover times per PS call x
w6) + NAS (Attach, Detach, LAU, RAU) and SMS per subscriber per BH x w9]/3600 =
44.6%/3600 = 0.0124%
Subscriber number supported by each SPUc board = (70%-10%) x 8/CP Load per subscriber
= (70% - 10%) x 8/0.0124% = 38709
BHCA capacity supported by each SPUc board = Subscriber number supported by one SPUc
board x (CS voice call per subscriber per BH + PS call per subscriber per BH) = 38709 x
(0.96 + 2) = 114578.
l Under this traffic model, theactual PS throughput capacity supported by each DPUe board
is 470 Mbit/s.
PS RAB mean data rate (UL+DL) (kbit/s) = [PS throughput (Including R99 and HSPA, UL
+DL) per PS subscriber in BH (bit/s) x 3600/1000]/[PS call per subscriber per BH x Mean
holding time (MHT) in DCH/H/FACH state per PS call (sec)]= 4,500 x 3600/1000/(2 x 52)
= 155.8
155.8 kbit/ ranges in [128, 196], PS Throughput Capacity per DPUe(Mbit/s) = 430 + (PS
RAB Mean data rate - 128) x 1.47 =430 + (155.8 - 128) x 1.47 = 470 Mbit/s.
Step 3 Configure hardware and hardware capacity licenses. (HW69 R16 boards are used.)
1.
Issue 09 (2015-07-27)
Calculate the number of required DPUe boards and hardware capacity licenses.
Item
Description
Iub PS
throughput
Iub CS
Traffic
61
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Item
Description
Active users
Cell number
Number of cells
managed by the RNC
Description
BHCA
requirement
BHCA required by
the network
Issue 09 (2015-07-27)
Active users
Number of active
users supported on
the control plane
On-line users
Number of online
users supported on
the control plane
NodeB
number
Number of NodeBs
managed by the
RNC
Cell number
Number of cells
managed by the
RNC
62
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
4.
Item
Capacity
Requirement
s
Iub
Iub transmission
type
GE Optical(IP)
Iub PS
throughput
ba = 4680
Mbps.
Iub CS Traffic
bb = 20800
NodeB number
bn = 600
an = 124800
Issue 09 (2015-07-27)
Calculate the number of GOUc(GOUe) boards to be configured for the Iu/Iur interface.
63
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Interfac
e
Item
Capacity
Requirement
s
Iu-CS
Iu-CS
transmission
type
GE Optical(IP)
Iu-CS traffic
cb = 16000
Iu-PS
transmission
type
GE Optical(IP)
Iu-PS throughput
pb = 3600.
IuPS on-line
users
pu = 23111
ps = 1778
Iu-PS
Assuming the PS and CS Iu interfaces and Iur interface are configured on the same GOUc
(GOUe) board, and in active/standby mode,
N_IUIUR_GOUc (pair) = ROUNDUP[Max(pb' + cb', ps', pu') + (pb' + cb')*8%] =
ROUNDUP[Max(1.13 + 0.89, 0.36, 0.12) + (1.13 + 0.89)*8%] = 3
N_GOUc (pair)= N_IUB_ GOUc + N_IUIUR_GOUc = 3+3 = 6.
6.
7.
8.
9.
Issue 09 (2015-07-27)
64
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
Name
Abbreviation
Model
Quan
tity
Cabinet
WP1B4PBCBN00
MPS
QM1P00UMPS01
EPS
QM1P00UEPS01
GCG
WP1D000GCG01
DPUe
WP1D000DPU03
18
QM1SHW165M00
QM1SHW300M00
SPUb
QM1M000SPU01
21
NIUa
WP1D000NIU00
10
QM1SNIU50M00
93
11
GOUc
WP1D000GOU01
12
GOUc
WP1D000GOU01
13
SAUc
None
1,2
To avoid the volume of inter-subrack data flows exceeding the limitation, service boards must
be evenly deployed among subracks accordingly. The following figure shows a recommended
configuration.
Issue 09 (2015-07-27)
65
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
4 Product Configurations
----End
Issue 09 (2015-07-27)
66
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
67
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Improving the service processing capability of the system through hardware expansion.
2.
Improving the service processing capability of the system by configuring hardware capacity
licenses.
The two methods can be adopted separately or together based on the traffic model and traffic
requirements of the network.
Board
HW60 R8
DPUc, DPUd, XPUa, SCUa, TNUa, GCUa, OMUb, EIUa, FG2a, GOUa,
OIUa, PEUa
HW69 R11
HW69 R13
HW69 R15
DPUf, DPUg, XPUc, SCUb, TNUb, GCUb, GCGb, OMUc, EIUb, OIUb,
FG2c, GOUe, PEUc, POUc, SAUc, NIUa
NOTE
In HW69 R15, XPUb is replaced by XPUc,EIUa is replaced by EIUb, OIUa is replaced by OIUb,
and PEUa is replaced by PEUc, GOUc is replaced by GOUe,but the board specifications are not
changed. Therefore, the configuration principle and capacity expansion principle of XPUc,EIUb,
OIUb, PEUc,GOUe remain the same as XPUb,EIUa, OIUa, PEUa, GOUc.
l
Issue 09 (2015-07-27)
BM Configuration
68
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000FG201
FG2c
Issue 09 (2015-07-27)
69
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
Issue 09 (2015-07-27)
70
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000GOU03
GOUe
Issue 09 (2015-07-27)
71
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
Issue 09 (2015-07-27)
72
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000POU01
POUc
Issue 09 (2015-07-27)
73
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
Issue 09 (2015-07-27)
74
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000EIU01
EIUb
The EIUb has the same capacity with the EIUa, so that
the EIUb inherits the configuration and capacity
expansion principles of the EIUa.
1. Number of Ater interface boards = 2 x ROUNDUP
(MaxAterCICPerBSC/AterCICPerEIUa, 0)
NOTE
The quantity depends on the number of CIC circuits on
the Ater interface. In the new site deployment scenario,
MaxAterCICPerBSC indicates the required number of
CIC circuits on the Ater interface.
In the capacity expansion scenario, MaxAterCICPerBSC
indicates the additional number of CIC circuits on the
Ater interface.
Issue 09 (2015-07-27)
75
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000OIU01
OIUb
The OIUb has the same capacity with the OIUa, so that
the OIUb inherits the configuration and capacity
expansion principles of the OIUa.
1. Number of Ater interface boards = 2 x ROUNDUP
(MaxAterCICPerBSC/AterCICPerOIUa, 0)
NOTE
The quantity depends on the number of CIC circuits on
the Ater interface.In the capacity expansion scenario,
MaxAterCICPerBSC indicates the additional number of
CIC circuits on the Ater interface.
Issue 09 (2015-07-27)
76
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000PEU01
PEUc
The PEUc has the same capacity with the PEUa, so that
the PEUa inherits the configuration and capacity
expansion principles of the PEUa.
1. Number of A interface boards = 2 x ROUNDUP
(MaxACICPerBSCIP/ACICperPEUaIP,0)
NOTE
The board quantity depends on the number of CIC
circuits. In the capacity expansion scenario,
MaxACICPerBSCIP indicates the additional number of
CIC circuits on the Ater interface.
Issue 09 (2015-07-27)
77
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000XPU03
XPUc
Issue 09 (2015-07-27)
78
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
Issue 09 (2015-07-27)
NIUa
79
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000DPU05
DPUf
Issue 09 (2015-07-27)
80
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000DPU06
DPUg
GEPS
QM1B0PBCBN00
Cabine
t
Multiple transmission modes, such as TDM, HDLC, and IP, can be used on the Abis
interface within one BSC.
l
TC Configuration
The following table describes the configurations of each module.
Issue 09 (2015-07-27)
81
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000EI
U01
EIUb
The EIUb has the same capacity with the EIUa, so that
the EIUb inherits the configuration and capacity
expansion principles of the EIUa.
1. Number of Ar interface boards = 2 x ROUNDUP
(MaxACICPerBSCTDM / ACICPerEIUa, 0)
NOTE
The quantity depends on the number of CIC circuits on the
A interface. In the capacity expansion scenario,
MaxACICPerBSCTDM indicates the additional number of
CIC circuits on the A interface.
OIUb
The OIUb has the same capacity with the OIUa, so that
the OIUb inherits the configuration and capacity
expansion principles of the OIUa.
1. Number of Ar interface boards = 2 x ROUNDUP
(MaxACICPerBSCTDM / ACICPerOIUa, 0)
NOTE
The quantity depends on the number of CIC circuits on the
A interface. In the capacity expansion scenario,
MaxACICPerBSCTDM indicates the additional number of
CIC circuits on the A interface.
Issue 09 (2015-07-27)
82
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Model
Name
WP1D000PE
U01
PEUc
The PEUc has the same capacity with the PEUa, so that
the PEUa inherits the configuration and capacity
expansion principles of the PEUa.
Number of Ar interface boards = 2 x ROUNDUP
(MaxACICPerBSCTDM / ACICIperPEUcIPACICPerEIUa, 0)
NOTE
The quantity depends on the number of CIC circuits on the A
interface. In the capacity expansion scenario,
MaxACICPerBSCTDM indicates the additional number of CIC
circuits on the A interface.
WP1D000PO
U01
POUc
WP1D000DP
U05
DPUf
GMIPEPRAC
K00
GEPS
QM1B0PBC
BN00
Issue 09 (2015-07-27)
Cabinet
83
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Total Replacement
An operator may want to increase equipment integration and achieve a larger capacity with
existing cabinets and subracks. In this case, a total replacement is recommended.
In a total replacement, the capacity is considered first. The Unistar quotation template is
used to work out a BSC equipment list based on the specifications of the new hardware
version. The boards required for the capacity expansion are determined through a
comparison with existing boards that can be reused. Boards that cannot be reused need to
be removed.
The procedure for a total replacement is as follows:
Step 1 Fill in the Unistar calculation table and calculate the configuration required after the capacity
expansion.
Step 2 Record the board and equipment configurations before the capacity expansion.
Step 3 The components required in the capacity expansion are the components after the capacity
expansion minus those before the capacity expansion.
Item
Name
Configuration
Before the
Capacity
Expansion
Configuration
After the
Capacity
Expansion
Number of
Components
to Be Added
A1
B1
B1 A1
A2
B2
B2 A2
A3
B3
B3 A3
Extended Processing
Units (XPUb)
A4
B4
B4 A4
Interface boards
A5
B5
B5 A5
Cabinets
A6
B6
B6 A6
84
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
on the entire network, FG2a and GOUa boards over the Gb interface can be regarded as FG2c
boards. FG2a, GOUa, and FG2c boards have no difference in terms of supporting small-capacity
Gb interfaces.
----End
l
Incremental Algorithm
If an operator wants to keep the original equipment without large-scale modifications to
the legacy network, new boards are used only for newly added sites and carriers. If the new
quotation template does not support mixed insertion of boards and the frontline personnel
want to simplify operations, use the original quotation template and the incremental
algorithm.
The core idea is to reuse as much legacy equipment as possible.
The purpose of mixed insertion is to use boards of different specifications in the same
logical or physical interface.
For example:
OIUa/OIUb and POUc boards can provide TDM-based optical ports on the A interface,
but they have different specifications.
FG2a and FG2c boards can be used for Abis over IP over FE/GE transmission, but they
have different specifications.
For mixed insertion of boards, the old boards used on each interface before capacity
expansion must be calculated.
The procedure for the incremental algorithm is as follows:
Step 1 Fill in the Unistar calculation table with the quotation parameters of the new hardware version
after the capacity expansion. By doing this, you get the configuration required after the capacity
expansion. In the Dimension Calculator window, you can view the capacity after the capacity
expansion.
Step 2 Fill in the Unistar calculation table with the quotation parameters of the original hardware version
before the capacity expansion. By doing this, you can obtain the configurations of each interface
board before the capacity expansion. In the Dimension Calculator window, you can view the
capacity before the capacity expansion.
Step 3 Subtract the hardware support capability before the capacity expansion from the capacity
required after the expansion. By doing this, you can obtain the capacity support capability
required for the expansion.
Generally, the traffic volume over the Gb interface is light. One pair of boards can cope even
during a capacity expansion. Therefore, if the traffic volume on the Gb interface is not higher
than 64 Mbit/s in FR transmission mode or 128 Mbit/s in IP transmission mode, set the capacity
increase on the Gb interface to 0.
Issue 09 (2015-07-27)
85
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Item
Name
Configuration
Required After
the Capacity
Expansion
Maximum Support
Capability Before
the Capacity
Expansion
Increased
Support
Capability
Required by
the Capacity
Expansion
TRX support
capability
A1
B1
B1 A1
Abis E1 quantity
A2
B2
B2 A2
A CIC quantity
A3
B3
B3 A3
IWF quantity
A4
B4
B4 A4
BHCA
A5
B5
B5 A5
Gb
A6
A6
B6 A6
Improving the service processing capability of the system through hardware expansion.
2.
Improving the service processing capability of the system by configuring hardware capacity
licenses.
The two methods can be adopted separately or together based on the traffic model and traffic
requirements of the network. The capacity expansion must match the description in section 4.2.6
Principles for Board Configurations
Issue 09 (2015-07-27)
Hardware Version
Board
HW69 R11
86
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Hardware Version
Board
HW69 R13
HW69 R15
The following table lists the number of components to be added to the BSC6900 UMTS that
adopts the HW69 R15 hardware for capacity expansion.
Item
Name
Configuration
Before the
Capacity
Expansion
Configuration
After the
Capacity
Expansion
Number of
Components
to Be Added
Cabinets
A1
B1
B1 A1
MPS
A2
B2
B2 A2
EPS
A3
B3
B3 A3
Clock board
A4
B4
B4 A4
A5
B5
B5 A5
Signaling processing
unit
A6
B6
B6 A6
Interface board
A7
B7
B7 A7
NOTE
Issue 09 (2015-07-27)
87
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Assume that the network configurations after capacity expansion are 13,400 Erlang, 1340 Mbit/
s (based on the traffic type UL/DL64/384 kbit/s), 496,000 BHCA (assume that the traffic model
is the balanced traffic model), 720 NodeBs, and 2400 Cells.
The following table lists the hardware configurations before and after capacity expansion. The
numbers of hardware components to be added are calculated according to the procedure
described in section 4.2 BSC6900 UMTS Product Configurations.
Table 5-1 Capacity expansion from configuration 1 to configuration 2
Configuration
Number
of
Cabinets
Number
of
Subracks
Number
of DPUe
Boards
Number
of SPUc
Boards
Number
of GOUc
Boards
Configuration 1
(before capacity
expansion)
Configuration 2
(after capacity
expansion)
Number of
components to be
added
It is recommended that boards be as evenly as possible distributed in every subrack, following the related
configuration principles.
Issue 09 (2015-07-27)
88
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
Configuration
Number of
QM1SHW165M00s
Number of
QM1SHW300M00s
89
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Configuration
Number of
QM1SHW165M00s
Number of
QM1SHW300M00s
If the BSC and RNC use different subracks, it is recommended that the RNC subrack serve
as the basic subrack.
2.
The BSC is configured with one to four subracks, whereas the RNC is configured with one
to five subracks.
3.
The total number of BSC and RNC subracks cannot exceed six.
4.
1.
If the BSC works in BM/TC separated mode, the MPS must serve as the GSM function
subrack.
2.
In GU mode, NIUa boards, which provide the service awareness function, are configured
for both GSM and UMTS modes.
3.
4.
Capacity expansion of the BSC6900 GU involves expanding the capacity of GSM subracks and
expanding the capacity of UMTS subracks. The general principles for capacity expansion are
the same as the principles of new BSC6900 GU deployment. For details about the capacity
expansion methods, see section 5.1 BSC6900 GSM Hardware Expansion and Upgrade
Configurations Example and section 5.2 BSC6900 UMTS Hardware Expansion and
Upgrade Configurations.
Issue 09 (2015-07-27)
90
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Appendix
Issue 09 (2015-07-27)
91
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
OMUc, SAUc, SCUb, GCGa, GCGb, GCUa, GCUb, DPUe, SPUb, SPUc, NIUa,
AEUa, PEUc, AOUc, FG2c, GOUc, GOUe, EIUb, OIUb, POUc, UOIc
Hardware
Version
Model
Description
HW69 R15
hardware
QM1P00UMPS01
QM1P00UEPS01
QM1M000SPU00/
QM1M000SPU03
WP1D000DPU03
WP1D000NIU00
WP1D000AEU00
WP1D000PEU01
WP1D000AOU01
WP1D000POU01
WP1D000UOI01
WP1D000GOU01/
WP1D000GOU03
WP1D000FG201
WP1D000SAU01
WP1D000GCU01/
WP1D000GOU02
QW1D000GCG01/
QW1D000GCG02
Issue 09 (2015-07-27)
WP1D000DPU05
WP1D000DPU06
WP1D000DPU03
92
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Hardware
Version
6 Appendix
Model
Description
WP1D000NIU00
WP1D000XPU01
WP1D000EIU01
WP1D000OIU01
Issue 09 (2015-07-27)
Parameter
Value
0.02
60
50%
50%
average LUs/sub/BH
1.2
0.15
0.15
average MOCs/sub/BH
0.6
average MTCs/sub/BH
0.6
MR report/sub/BH
144
0.6
1.1
0.1
0.56
0.01
93
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Parameter
Value
0.001
50%
1.75
0.9
PS Paging / Sub/BH
1.25
2.
3.
The capacity under UMTS BSC6900 typical configurations in the balanced traffic model, highPS traffic model, and smartphones traffic model are described as follows.
1.
Issue 09 (2015-07-27)
Property
Value
Description
20 mE
1.5 mE
PS throughput (Including
R99 and HSPA, UL+DL)
per PS subscriber in BH
4500 bit/s
Proportion of soft
handovers
30%
94
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Property
Value
Description
3.6
Iur traffic
8%
The following table lists the capacity of a BSC6900 UMTS in typical configurations. In
this table, the BSC6900 UMTS is configured with HW69 R15 boards and uses the balanced
traffic model.
Table 6-3 Capacity of a BSC6900 UMTS in typical configurations (HW69 R15 boards) of
Balanced traffic model
Subscribers
CS Voice
Service
Capacity
(Erlang)
PS Service
Capacity (Iub
UL+DL)
(Mbit/s)
BHCA
(k)
Active
Users
Online
users
1,760,000
45,738
7920
5300
229,000
869,000
NOTE
l The CS voice service capacity and PS service capacity can reach the maximum at the same time.
l Subscribers means the number of users connected to the network in one busy hour.
l Active user means the number of user in active state simultaneously, active state includes
Cell_DCH and Cell_FACH.
l Online user means the number of user in online state simultaneously, online state includes
Cell_DCH, Cell_FACH, Cell_PCH and Ura_PCH.
2.
Issue 09 (2015-07-27)
Item
Specificati
on
Description
3 mE
0.2 mE
95
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Item
Specificati
on
Description
PS throughput
43,500 bit/s
Proportion of soft
handovers
30%
3.6
Iur traffic
8%
The following table lists the capacity of a BSC6900 UMTS in typical configurations. In
this table, the BSC6900 UMTS is configured with HW69 R15 boards and uses the highPS traffic model.
Table 6-5 Capacity of a BSC6900 UMTS in typical configurations (HW69 R15 boards) of
High-PS traffic model
Subscriber
s
CS Voice
Service
Capacity
(Erlang)
PS Service
Capacity (Iub
UL+DL)
(Mbit/s)
BHCA
(k)
Active
Users
Online
Users
925,000
3600
40,200
2900
243,000
567,000
NOTE
l The CS voice service capacity and PS service capacity can reach the maximum at the same time.
l SPUb specifications in High-PS traffic model is 112K BHCA.
l Subscribers means the number of users connected to the network in one busy hour.
l Active user means the number of user in active state simultaneously, active state includes
Cell_DCH and Cell_FACH.
l Online user means the number of user in online state simultaneously, online state includes
Cell_DCH, Cell_FACH, Cell_PCH and Ura_PCH.
3.
Issue 09 (2015-07-27)
96
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Specificatio
n
Description
30mE
PS throughput
1600 bit/s
Proportion of soft
handovers
34%
2.3
2.8
Iur traffic
8%
The following table lists the capacity of a BSC6900 UMTS in typical configurations. In this
table, the BSC6900 UMTS is configured with HW69 R15 boards and uses the traffic model for
smartphones.
Table 6-7 Capacity of a BSC6900 UMTS in typical configurations (HW69 R15 boards)
Issue 09 (2015-07-27)
Subscribers
CS Voice
Service
Capacity
(Erlang)
PS Service
Capacity
(Iub UL
+DL)
(Mbit/s)
BHCA
(k)
Active
Users
Online User
1,440,000
47,000
1860
12,800
230,000
869,000
97
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
NOTE
l The CS voice service capacity and PS service capacity can reach the maximum at the same time.
l Subscribers means the number of users connected to the network in one busy hour.
l Subscribers means the number of users connected to the network in one busy hour.
l Active user means the number of user in active state simultaneously, active state includes Cell_DCH
and Cell_FACH.
l Online user means the number of user in online state simultaneously, online state includes Cell_DCH,
Cell_FACH, Cell_PCH and Ura_PCH.
Issue 09 (2015-07-27)
Parameter Name
Meaning
Specificat
ion
Board
TrxPerXPUaWithMPU
270
XPUa
98
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Parameter Name
Meaning
Specificat
ion
Board
BHCAPerXPUaWithMPU
492,000 for
GBTS
XPUa
ErlPerXPUaWithMPU
1720
XPUa
TrxPerXPUaWithoutMPU
360
XPUa
BHCAPerXPUaWithoutMPU
656,000 for
GBTS
XPUa
ErlPerXPUaWithoutMPU
2300
XPUa
TrxPerXPUc
640
XPUc
BHCAPerXPUc
1,050,000
for GBTS
XPUc:
BHCA
445,000 for
eGBTS
590,000 for
eGBTS
950,000 for
eGBTS
Issue 09 (2015-07-27)
ErlPerXPUc
3900
XPUc:
Erlang
PDCHNoPerDPUd
1024
DPUd
PDCHNoPerDPUg
1024
DPUg
IWFNoPerDPUc
3740
DPUc
TCNoPerDPUc
TC processing capability of
the DPUc
960
DPUc
99
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter Name
Meaning
Specificat
ion
Board
IWFNoPerDPUf(TDM*IP)
3840
DPUf
IWFNoPerDPUf(IP*IP)
7680
DPUf
TCNoPerDPUf
TC processing capability of
the DPUf
1920
DPUf
STM1PortPerPOUc
POUc
TRXHRPerPOUcTDM
Active/
Standby
mode: 512
POUc: TDM
ACICPerPOUcTDM
7680
POUc: TDM
ACICPerPOUcTDM
3906
POUc: TDM
AterCICPerPOUcTDM
7168
POUc: TDM
TRXPerPOUcIP
2048
POUc: IP
ACICPerPOUcIP
23,040
POUc: IP
100
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter Name
Meaning
Specificat
ion
Board
GbTputPerPOUcFR
Throughput (Mbit/s)
supported by the POUc
over the Gb interface in FR
transmission mode
504
POUc: Gb
FR
E1PortPerEIUa
32
EIUa/EIUb:
TDM
TRXHRPerEIUa
Active/
Standby
mode: 384
EIUa/EIUb:
TDM
AterCICPerEIUa
3840
EIUa/EIUb:
TDM
ACICPerEIUa
960
EIUa/EIUb:
TDM
STM1PortPerOIUa
OIUa/OIUb:
TDM
TRXHRPerOIUa
Active/
Standby
mode: 384
OIUa/OIUb:
TDM
AterCICPerOIUa
7168
OIUa/OIUb:
TDM
ACICPerOIUa
1920
OIUa/OIUb:
TDM
E1PortPerPEUa
32
PEUa
GbTputPerPEUaFR
Throughput (Mbit/s)
supported by the PEUa over
the Gb interface in FR
transmission mode
64
PEUa: Gb
FR
TRXPerPEUaIP
384
PEUa: IP
101
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter Name
Meaning
Specificat
ion
Board
ACICperPEUaIP
6144
PEUa: IP
GEPortPerFG2c
Number of GE ports
supported by the FG2c
FG2c
FEPortPerFG2c
Number of FE ports
supported by the FG2c
12
FG2c
GEPortPerGOUc
Number of GE ports
supported by the GOUc
GOUc
GEPortPerGOUe
Number of GE ports
supported by the GOUe
GOUe
GbTputPerFG2c
Throughput (Mbit/s)
supported by the FG2c/
GOUc/GOUe over the Gb
interface in IP transmission
mode
1024
FG2c/
GOUc/
GOUe
TRXNoPerFG2c
2048
FG2c/
GOUc/
GOUe
ACICPerFG2c
23,040
FG2c/
GOUc/
GOUe
LogicalPortPerFG2c
490
FG2c/
GOUc/
GOUe
MaxSubrackTC
Maximum number of
supported TC subracks
TC subrack
MaxCICPerSubrackTC
10,240
TC subrack
Max64KNo7linkPerBSC
Maximum number of 64
kbit/s signaling links
supported by each BSC
4 x 16
BSC/No.7
102
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Parameter Name
Meaning
Specificat
ion
Board
MaxHSLNo7linkPerBSC
4x8
BSC/No.7
MaxInterSubrackTDMSwitch
Maximum switching
capability between
subracks of the BSC. By
default, two highways can
be configured between
every two subracks and the
switching capability of
each highway is 4000. A
maximum of three
highways can be
configured between two
subracks.
4000 x 2
BSC/LVDS
Issue 09 (2015-07-27)
103
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Issue 09 (2015-07-27)
Parameter
Parameter Description
Specifications
Board
BHCAPerSPUa
80,000
SPUa
NodebPerSPUa
100
SPUa
CellPerSPUa
300
SPUa
ActiveUsersPerSPUa
4800
SPUa
OnlineUsersPerSPUa
12,000
SPUa
BHCAPerSPUb
124,000
SPUc/
SPUb
NodebPerSPUb
180
SPUc/
SPUb
CellPerSPUb
600
SPUc/
SPUb
ActiveUsersPerSPUb
9600
SPUc/
SPUb
OnlineUsersPerSPUb
24,000
SPUc/
SPUb
CellPerDPUb
150
DPUb
ErlPerDPUb
1800
DPUb
ActiveUsersPerDPUb
3300
DPUb
CellPerDPUe
300
DPUe
ErlPerDPUe
3350
DPUe
104
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
6 Appendix
Parameter
Parameter Description
Specifications
Board
PsThtPerDPUe
Real PS throughput(Mbit/s)
supported by each DPUe board
DPUe
If x in [0, 16], y=
5.625*x
If x in [16, 40],
y=90+6.67*x;
If x in [40, 64],
y=250+2.08*x;
If x in [64, 128],
y=300+2.03*x;
If x in [128, 196],
y=430+ 1.47*x;
If x in [196, 448],
y=530+ 1.07*x;
If x in [448, ],
y=800
Issue 09 (2015-07-27)
ActiveUsersPerDPUe
5880
DPUe
MaxInterSubrackSwitchSCUa
SCUa
MaxInterSubrackSwitchSCUb
40
SCUb
NodebPerAOUc
500
AOUc
ErlPerAOUc
18,000
AOUc
IubUlPsThrPerAOUc
PS UL throughput (Mbit/s)
supported by the AOUc board
functioning as the Iub interface board
300
AOUc
IubDlPsThrPerAOUc
PS DL throughput (Mbit/s)
supported by the AOUc board
functioning as the Iub interface board
300
AOUc
IubUlDlPsThrPerAOUc
600
AOUc
IuUlPsThrPerAOU
c
PS UL throughput (Mbit/s)
supported by the AOUc board
functioning as the Iu interface board
350
AOUc
105
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter
Parameter Description
Specifications
Board
IuDlPsThrPerAOU
c
PS DL throughput (Mbit/s)
supported by the AOUc board
functioning as the Iu interface board
350
AOUc
IuUlDlPsThrPerAOUc
700
AOUc
NodebPerUOIc
500
UOIc
ErlPerUOIc
18,000
UOIc
IubUlPsThrPerUO
Ic
PS UL throughput (Mbit/s)
supported by the UOIc board
functioning as the Iub interface board
800
UOIc
IubDlPsThrPerUO
Ic
PS DL throughput (Mbit/s)
supported by the UOIc board
functioning as the Iub interface board
800
UOIc
IubUlDlPsThrPerUOIc
1200
UOIc
IuUlPsThrPerUOI
c
PS UL throughput (Mbit/s)
supported by the UOIc board
functioning as the Iu interface board
900
UOIc
IuDlPsThrPerUOI
c
PS DL throughput (Mbit/s)
supported by the UOIc board
functioning as the Iu interface board
900
UOIc
IuUlDlPsThrPerUOIc
1800
UOIc
NodebPerGOUc/
NodebPerFG2c
500
GOUc/
GOUe/
FG2c
ErlPerGOUc/
ErlPerFG2c
18,000
GOUc/
GOUe/
FG2c
SessionsPerGOUc/
SessionsPerFG2c
5000
GOUc/
GOUe/
FG2c
IubUdpPerGOUc/
IubUdpPerFG2c
129,000
GOUc/
GOUe/
FG2c
106
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter
Parameter Description
Specifications
Board
IuPSTeidPerGOUc
/IuPSTeidPerFG2c
200,000
GOUc/
GOUe/
FG2c
IubUlPsThrPerGOUc/
IubUlPsThrPerFG
2c
PS UL throughput (Mbit/s)
supported by the GOUc/GOUe/FG2c
board functioning as the Iub interface
board
2600
GOUc/
GOUe/
FG2c
IubDlPsThrPerGOUc/
IubDlPsThrPerFG
2c
PS DL throughput (Mbit/s)
supported by the GOUc/GOUe/FG2c
board functioning as the Iub interface
board
2600
GOUc/
GOUe/
FG2c
IubUlDlPsThrPerGOUc/
IubUlDlPsThrPerF
G2c
2600
GOUc/
GOUe/
FG2c
IuUlPsThrPerGOU
c/
IuUlPsThrPerFG2
c
PS UL throughput (Mbit/s)
supported by the GOUc/GOUe/FG2c
board functioning as the Iu interface
board
3200
GOUc/
GOUe/
FG2c
IuDlPsThrPerGOU
c/
IuDlPsThrPerFG2
c
PS DL throughput (Mbit/s)
supported by the GOUc/GOUe/FG2c
board functioning as the Iu interface
board
3200
GOUc/
GOUe/
FG2c
IuUlDlPsThrPerGOUc/
IuUlDlPsThrPerF
G2c
3200
GOUc/
GOUe/
FG2c
PortNumGOUe/
PortNumFG2c
GOUc/
GOUe/
FG2c
Stm1PortNumAO
Uc
AOUc
E1PortNumAOUc/
T1PortNumAOUc
252/336
AOUc
107
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
6 Appendix
Parameter
Parameter Description
Specifications
Board
Stm1PortNumUOI
c
UOIc
POUc
Stm1PortNumPO
Uc
252/336
POUc
E1PortNumPOUc/
T1PortNumPOUc
3200
NIUa
PsThtPerNIUa
108
SRAN8.0&GBSS15.0&RAN15.0 BSC6900
Configuration Principles (Global)
Issue 09 (2015-07-27)
Full Name
ATM
CN
Core Network
GPS
Iu
Iub
Iur
NodeB
RNC
MPS
EPS
STM-1
109