Professional Documents
Culture Documents
Ancon 12pp Ce1 Booklet
Ancon 12pp Ce1 Booklet
CE Marking
to the CPR:
What does it all mean?
Relevant European
Standard/Approval
Key Requirements
of CE Marking
Masonry supports
Windposts
Compression
systems
Steel balcony
connectors
Other fabricated
components
EN 1090. Part 1.
Designs to EN 1993
(Eurocode 3).
Inspection of
factory production
controls by an
approved body
including welding
certification*
Legal requirement:
1 July 2014
EN 845. Part 1.
Extensive
independent
product testing.
Legal requirement:
1 July 2013
EN 845. Part 2.
Lintels.
Extensive
independent
product testing.
Legal requirement:
1 July 2013
Masonry
reinforcements
AMR, AMR-X
and AMR-CJ
Ancon 500
Tension bar
systems
EN 845. Part 3.
Extensive
independent
product testing.
Legal requirement:
1 July 2013
ETA 06/0146
Legal requirement:
1 July 2013
*Ancon is certified to undertake welded fabrication work to Execution Class 2 to EN 1090-2. This covers the
majority of building applications and is the default class when unspecified. For more information on Execution
Classes, please visit www.ancon.co.uk or contact Ancon.
Declaration of Performance
Declaration Number: A0017-00-EN
ST1 225mm
Declaration of Performance
as a,
Intended Use:
Type 1 wall tie for connecting two leaves of a cavity
ANCON hereby declares that the product range
wall.identified
Suitable as,
for 76-100mm cavities.
Notified Body:
Supporting documentation
Declaration of Performance (DoP)
available for each product.
Declaration of Performance
as an,
1 of the standard
Internal Head
Restraint
Notified
Bodycovered
Number:in clause1289
Intended Use:
Internal head restraint for connecting the top of a
This product conforms to System 3 - Assessment and Verification of Constancy of
ANCON hereby declares that the product identified
as
new masonry
wall
toconducted
the underside
of above
a structural
Performance. All necessary
testing
was
at the
notified body.
frame - max. 25mm gap
AMR/S/D5.0/W60
Essential
Characteristics
conforms to the provisions of
Annex ZA,
BS EN 845-3:2003+A1:2008, as
Notified Body:
CERAM Research Limited
Load
4600N
(M2 (iv) Mortar), 5640N (M12 (i) Mortar)
Queens
Road,
Penkhull
Bed Joint Reinforcement Compressive
defined in 4.2.2
of Capacity:
the Standard
STOKE-ON-TRENT
ST4(iv)
7LQ
Tensile Load Capacity:
4060N (M2
Mortar), 5490N (M12 (i) Mortar)
United Kingdom
Water
Shedding
Capability:
Resistant
For
structural
uses
in walls
and partitions
Tel: +44
(0)1782
764444
Intended Use:
Durability:
Number:
1289Limited None
Dangerous
Substances:
Notified Body: Notified Body
CERAM
Research
Queens Road, Penkhull
STOKE-ON-TRENT ST4 7LQ
This productConditions
conforms to System 3 - Assessment and Verification of Constancy of
Manufactured by:
United Kingdom
Performance. All necessary testing was conducted at the above notified body.
Tel: +44Depth:
(0)1782 764444 min. 62.5mm
Embedment
10mm
Refer to Clause 6.2.2.2. PD 6697:2010
Dangerous Substances:
None
N/A
10mm
Width:
Profile Height:
Recommended Spacing:
Longitudinal Wire Size:
2.9 0.4mm
As required
7.35 0.1mm
2.30 0.1mm
by:
grade 1.4301
Lap Length:
450 3.0%
500N/mm2
500N/mm2
16th21150N
May 2013
225mm (to include at
least one cross wire)
2000N
Ductility:
Normal
R3 (Stainless Steel)
Dangerous Substances:
None
Authorised by:
Certification documents
Factory production control certificates
from an approved third party including
welding certification.
Your CE Marking
questions answered
Q: I am a distributor, does CE Marking affect me?
A: You need to be sure that all of the construction products you sell meet
the requirements of the CPR and carry the CE mark where appropriate.
You also need to ensure products are accompanied by the correct
documentation and that relevant additional information is supplied
when requested.
Ancon distributors can be confident that all of our products meet the CPR
requirements and are CE marked where appropriate. You can download
any Declaration of Performance (DoP) and other relevant information from
www.ancon.co.uk/CE.
A:
Only construction products manufactured after 1st July 2013 are affected.
Stock supplied before this date is unaffected.
All Ancon products are CE marked where required and we offer free
technical support on product suitability. Our DoPs are available from
www.ancon.co.uk/CE. Some Ancon products can be modified on site
to our instructions, without affecting the validity of the CE mark e.g.
AnconOptima masonry support.
A:
Ancon holds a number of voluntary, third party approvals for its products
(see page 10). These have similar or sometimes even greater compliance
requirements than CE marking.
Reinforcement Continuity
Systems Eazistrip/KSN
Balcony Connectors
Isolan
Wall Starters
Universal/Quickstart
Tested at
EMPA
Wall Ties
TeploTie
Tested at
CERAM
Cast-in Channels with
Crimped Anchor Pairs
Tested to BS 5080,
Parts 1 & 2
10