Professional Documents
Culture Documents
Cathodic Protection Training Course
Cathodic Protection Training Course
1 of 2
http://www.rogeralexander1938.webspace.virginmedia.com/cpn/Corre...
It is in an empty section and on the level, in relation to the bottom of the large
container.
This could be likened to three places where the coating on a pipeline has
'disbonded' from the metal.
25/03/2016 11:39
2 of 2
http://www.rogeralexander1938.webspace.virginmedia.com/cpn/Corre...
Each has included some material that results in each 'blister' having a different
electromotive force at its anodic interface.
The coating is not penetrated and there is not conductive path to allow corrosion
to proceed.
We cannot gather any of this information in the case of a real cathodic protection
as we can only measure between to electrical potentials that themselves can be
at any level in the system.
25/03/2016 11:39