The document outlines a 4-step process for removing a strut. Step 1 is to cut and remove the fork. Step 2 is to cut one end of the strut. Step 3 is to remove half of the strut by arranging slings and opening bolts. Step 4 is to remove the remaining strut by arranging slings, opening bolts on the fork side, and removing the final piece of the strut.
The document outlines a 4-step process for removing a strut. Step 1 is to cut and remove the fork. Step 2 is to cut one end of the strut. Step 3 is to remove half of the strut by arranging slings and opening bolts. Step 4 is to remove the remaining strut by arranging slings, opening bolts on the fork side, and removing the final piece of the strut.
The document outlines a 4-step process for removing a strut. Step 1 is to cut and remove the fork. Step 2 is to cut one end of the strut. Step 3 is to remove half of the strut by arranging slings and opening bolts. Step 4 is to remove the remaining strut by arranging slings, opening bolts on the fork side, and removing the final piece of the strut.
(UPON SLINGS HAS BEEN PROPERLY TIED) 1c. REMOVE FORK
SIMPLE METHOD STATEMENT
STRUT REMOVAL SEQUENCE 2. CUT STRUT AT ONE END 2a. CUT THE 200mm PIECE AT END OF STRUT; - CUT HALF WAY AT BOTH BEAM - FULL CUT UPON STRUT TIED WITH SLINGS
SIMPLE METHOD STATEMENT
STRUT REMOVAL SEQUENCE 3. REMOVE HALF STRUT 3a. ARRANGE THE LIFTING SLINGS AT IT'S BEST POSITION; 3b. OPEN THE BOLTS AROUND MID SPAN MAKE SURE THE REMAIN STRUT REST ON PROPER SUPPORT (ie. RUNNER BEAM OR TEMPORARY SUPPORT) 3c. REMOVE HALF OF THE STRUT;
SIMPLE METHOD STATEMENT
STRUT REMOVAL SEQUENCE 4. REMOVE REMAIN STRUT 4a. ARRANGE THE LIFTING SLINGS AT IT'S BEST POSITION 4b. OPEN THE FORK'S BOLTS NEAR TO WALER SIDE OR CUT WITH FLAMES IF NO BOLTS CONNECTION; 4c. OPEN THE STRUT BOLTS AT LAST PIECE OF STRUT 4d. REMOVE THE STRUT;