PRIMENERGY PRODUCTION EQUIPMENT HORIZONTAL HIGH AND LOW PRESSURE
SEPARATORS Horizontal Design
Allows longer settling time
Small physical size
Greater flexibility of package design
Easier to transport and set up
Improves solid handling capability
Unique Angled Inlet Deflector Plate
Reduces internal turbulence
Increases gas separation
Reduces system pressure drop
Improves solid separation
Innovative Design Calming Baffles
Virtually eliminates turbulence
Calms interface for more efficient operation
STANDARD SIZES LOW PRESSURE SEPARATORS
VESSEL SIZE FLUID CAPACITY GAS CAPACITY 24" x 7'-6' 2700 BPD 3.5 MMCFD 24" X 10' 3700 BPD 4.8 MMCFD 30" x 10' 5800 BPD 7.6 MMCFD 36" x 10' 8300 BPD 10.9 MMCFD
STANDARD SIZES HIGH PRESSURE SEPARATORS
VESSEL SIZE FLUID CAPACITY GAS CAPACITY 16" x 10' 1420 BPD 8.7 MMCFD 20" x 10' 2160 BPD 13.2 MMCFD 24" x 10' 3200 BPD 19.6 MMCFD 30" x 10' 5000 BPD 31.0 MMCFD 30" x 15' 7500 BPD 38 MMCFD 36" x 15' 11,000 BPD 55 MMCFD 36" x 20' 15,000 BPD 65 MMCFD * Approximate sizes, based on 40 API oil and a 50% water cut, for quick reference only. Actual capacity depends upon well and produced fluid conditions. Contact your representative to determine your exact needs prior to ordering. Larger sizes available upon request. 2 PHASE LOW PRESSURE SEPARATOR STANDARD EQUIPMENT 125 PSIG WP ASME CODE HORIZONTAL TWO PHASE LOW PRESSURE SEPARATOR COMPLETE AS FOLLOWS: NOZZLES: One 150# ANSI Flanged Gas Inlet & Outlet Two 3,000# Threadolet Liquid Level Control One 150# ANSI Flanged Liquid Outlet One 3,000# Threadolet Relief Valve One 3,000# Threadolet Supply Gas Four 3,000# Threadolet Gauge Glass One 3,000# Threadolet Drain One 3,000# Threadolet Thermometer INTERNALS: Inlet Diverter Wave Breaker S.S. Wire Mesh Mist Extractor Vortex Breakers Over Oil and Water Outlets ACCESSORIES: One NPT Liquid Level Control One 2" NPT Dump Valve One Penberthy Reflex Gauge Glass Assembly and Draincock One Threaded Relief Valve Set at Vessel W.P. One NPT Hammer Union Rupture Head with One (1) 125 PSIG Disc ONE SUPPLY GAS SYSTEM CONSISTING OF THE FOLLOWING: One 0-150# Pressure Gauge One Regulator One Condensate Chamber w/Draincock One NPT Steel Isolating Needle Valve
One H.P. Drip Pot
Miscellaneous S.S. Fittings and S.S. Tubing All equipment mounted on a structural steel skid with interconnecting piping and fittings. STANDARD UNIT SIZING SIZE GAS OIL RESALE PRICE 24" x 7-1/2' 0-4 MM 0-1400 24" x 10' 1-5 MM 400-1900 30" x 7-1/2' 3-6.3 MM 1000-2500 30" x 10' 4-7.6 MM 1500-3000 36" x 10' 5-11 MM 2500-4500 OPTIONS Internal coating with Coal Tar Epoxy 3 PHASE LOW PRESSURE SEPARATOR STANDARD EQUIPMENT 125 PSIG WP ASME CODE HORIZONTAL THREE PHASE LOW PRESSURE SEPARATOR COMPLETE AS FOLLOWS: NOZZLES: One 150# ANSI Flanged Gas Inlet & Outlet Two 3,000# Threadolet Liquid Level Outlets One 150# ANSI Flanged Oil Outlet One 150# ANSI Flanged Water Outlet One 3,000# Threadolet Relief Valve One 3,000# Threadolet Supply Gas Four 3,000# Threadolet Gauge Glass One 3,000# Threadolet Drain One 3,000# Threadolet Thermometer INTERNALS: Inlet Diverter Wave Breaker S.S. Wire Mesh Mist Extractor Vortex Breakers Over Oil and Water Outlets ACCESSORIES: Two NPT Liquid Level Controls Two 2" NPT Dump Valves Two Penberthy Reflex Gauge Glass Assemblies and Draincock One Threaded Relief Valve Set at Vessel W.P. One NPT Hammer Union Rupture Head with One (1) 125 PSIG Disc ONE SUPPLY GAS SYSTEM CONSISTING OF THE FOLLOWING: One 0-150# Pressure Gauge One Regulator One Condensate Chamber w/Draincock One Regulator
One 0-200# Pressure Gauge
One NPT Steel Isolating Needle Valve One H.P. Drip Pot Miscellaneous S.S. Fittings and S.S. Tubing All equipment mounted on a structural steel skid with interconnecting piping and fittings. STANDARD UNIT SIZING SIZE GAS OIL RESALE PRICE 24" x 10' 2700 BPD 3.5 MMCFD 30" x 10' 3700 BPD 4.8 MMCFD 36" x 10' 8300 BPD 10.5 MMCFD OPTIONS Internal coating with Coal Tar Epoxy