Professional Documents
Culture Documents
Production II Lab Work Lab Work # 1 Torsion Test and Microstructural Examination For Twisted Samples
Production II Lab Work Lab Work # 1 Torsion Test and Microstructural Examination For Twisted Samples
Production II Lab Work Lab Work # 1 Torsion Test and Microstructural Examination For Twisted Samples
Lab work
Lab work # 1 Torsion Test and Microstructural Examination for twisted
samples
Group work:
Group number:
Names of group:
sequence
1
2
3
4
5
6
7
8
9
10
ID
Name
Test procedure:
1- Cut a rounded sample with 20mm diameter and 200 mm length.
2- Load the sample on torsion machine.
3- Turn the test on.
4- Observe the sample while being deformed.
5- Record the number of revolutions till fracture occurs.
6- Unload the sample from the machine.
Requirement:
1- Study the twist angle that has been resulted from the test, using the appropriate
formula for doing that.
2- Study the microstructure of the sample after the test.
Individual work: (similarity more than 50% will be considered plagiarism and is
not accepted for submission)
Name:
I.D.:
Group: