Professional Documents
Culture Documents
Material C of C
Material C of C
Material Cert is only required with the original FAI unless Purchase Order Code RC-09 is specified
General Requirements
1. Material Certification (Cert) is required for each material called out in the drawing requirements.
2. Materials that require Certification:
A. Specific material that is called out for use in the item being supplied to Rockwell Collins.
B. Material defined in drawing notes or parts list that must conform to a defined requirement; includes materials
used in sub-level build-to-print documents.
C. Items to be altered. Commercial-off-the-shelf (COTS) or standard catalog items, only when they are declared on
Form 2, such as hardware, fasteners, and common electrical components, etc.
3. Acceptable Material Certification:
A. Material Cert must be from the manufacturer of the material, or the raw material test report provider.
B. A Material Test Report is an acceptable Material Cert if it includes applicable specific requirements listed below.
C. For Printed Wiring Boards (PWB): Cert of Comp from the PWB supplier is adequate to satisfy material certification.
D. Delta FAI requires a Material Cert only if the material was changed.
E. For COTS or standard catalog items: Provide evidence/traceability of procuring the correct items.
Rev: May-15-2014