This document outlines tasks for configuring EIGRP in a GNS3 lab topology, including configuring interface IP addresses and bandwidth, enabling EIGRP using AS 90, using a wildcard mask to advertise networks, ensuring EIGRP does not operate as a classful routing protocol, configuring a default null0 route on R1, redistributing static routes, configuring passive interfaces, manually summarizing routes on all routers, enabling unequal load balancing, increasing bandwidth usage by 30% from defaults, and enabling authentication between routers using key id 1 and password "cisco4ever".
This document outlines tasks for configuring EIGRP in a GNS3 lab topology, including configuring interface IP addresses and bandwidth, enabling EIGRP using AS 90, using a wildcard mask to advertise networks, ensuring EIGRP does not operate as a classful routing protocol, configuring a default null0 route on R1, redistributing static routes, configuring passive interfaces, manually summarizing routes on all routers, enabling unequal load balancing, increasing bandwidth usage by 30% from defaults, and enabling authentication between routers using key id 1 and password "cisco4ever".
This document outlines tasks for configuring EIGRP in a GNS3 lab topology, including configuring interface IP addresses and bandwidth, enabling EIGRP using AS 90, using a wildcard mask to advertise networks, ensuring EIGRP does not operate as a classful routing protocol, configuring a default null0 route on R1, redistributing static routes, configuring passive interfaces, manually summarizing routes on all routers, enabling unequal load balancing, increasing bandwidth usage by 30% from defaults, and enabling authentication between routers using key id 1 and password "cisco4ever".
Configure interface bandwidth. Configure EIGRP for the shown network using EIGRP AS 90. Use wildcard mask in advertising a network. EIGRP should not operate like a classful routing. In R1, configure a default route pointing to null0. Redistribute static route. Configure passive interface. Configure manual summarization in all routers. Configure unequal load balancing. Configure all routers to use 30% more bandwidth than the EIGRPs default configuration. Enable authentication between routers. o Use key id 1 and passphase: cisco4ever