The document provides specifications for constructing a small workshop with steel columns, steel roof trusses, and metal sheet roofing. The workshop will have a concrete foundation and basement built with brick walls. Steel I-section columns will support steel trusses spaced 4 meters apart to carry the roof. Angular steel trusses will support the metal sheet roofing spaced 3 meters apart. Various doors and windows will be included along with concrete flooring and brick steps.
The document provides specifications for constructing a small workshop with steel columns, steel roof trusses, and metal sheet roofing. The workshop will have a concrete foundation and basement built with brick walls. Steel I-section columns will support steel trusses spaced 4 meters apart to carry the roof. Angular steel trusses will support the metal sheet roofing spaced 3 meters apart. Various doors and windows will be included along with concrete flooring and brick steps.
The document provides specifications for constructing a small workshop with steel columns, steel roof trusses, and metal sheet roofing. The workshop will have a concrete foundation and basement built with brick walls. Steel I-section columns will support steel trusses spaced 4 meters apart to carry the roof. Angular steel trusses will support the metal sheet roofing spaced 3 meters apart. Various doors and windows will be included along with concrete flooring and brick steps.
Specification 1. Foundation: The foundation for all main walls will be in CC 1:5:10 mix 900 200 thick laid at 600 below ground level. The masonry footing will be in CM 1:5 500 wide and 400 thick for all main walls, 2. Steel columns: I- Section columns of suitable size will be provided with suitable foundation for pillar posts in between the walls as shown in line diagram. 3. Basement: The basement will be in brick work in CM 1:5 400450 above ground level for all walls and is filled with river sand. 4. Superstructure: The steel trusses (I section) @ 4000 ht, 3000 c/c will be provided to carry the steel trusses. The in between walls are in BW with CM 1:5 for the same height. The walls are placed with CM 1:4 externally and 1:5 internally for 12.5 mm thick. 5. Roofing: The roofing over steel angular trusses (L angles) is AC sheets the trusses will be spaced at 3000 centre to centre and rest on steel columns. Both the ends are welded properly. Eaves projections will be 600 beyond the outer face of walls. 6. Doors and windows : RS - Rolling shutter - 3000 2400 D Door panelled - 1000 2000 D1 Door panelled - 900 2000 W - Window panelled - 1500 1500 W1 - Window panelled - 1200 1500 V Ventilator 1000 450 7. Lintel : All external wall openings will be provided with RCC lintel 1:2:4 with sunshade 150 thick and 600 wide 8. Flooring : The flooring will be in CC 1:4:8 mix , 130 thick and top plastered smoothly with CM 1:3 , 20 thick . 9. Steps :
Steps will be in brick work in CM 1:5 mix, Ramp in cement concrete 1:4:8 3000 2000 will be provided .
Strength Of Beams, Floor And Roofs - Including Directions For Designing And Detailing Roof Trusses, With Criticism Of Various Forms Of Timber Construction