Professional Documents
Culture Documents
Anabond AnaSteel Putty
Anabond AnaSteel Putty
Anasteel Putty
Anabond
Product Description
Chemical Type
Epoxy
Flow properties
Appearance
(uncured)
Putty
Colour
Components
Thixotropic
Cure
Quick Set
Application
Usage
Putty
2.60 2.80
@ 30C 30 minutes
@ 40C 15 minutes
Cold welding
Automobile, Industrial
Self Life
Anabond Steel Putty is two component
epoxy cold weilding putty suitable for
: 12 month
85
: 500
General Information
For safe handling information on this
product, consult the Material Safety Data
Sheet (MSDS).
Page 1 of 2
Surface preparation
Conversions
Storage
mm / 25.4 = inches
N x 0.225 = lb
Store the material in its original container between N/mm x 5.71 = lb/in
20 and 30C in dry atmosphere to prevent moisture Kg/cm2 = 10.2 x N/mm2
absorption and crystallization. Do not open until
N/mm x 145 = psi
ready to use.
MPa x 145 = psi
Nm x 8.851 = lbin
Packing
1 kg
Nm x 0.738 = lbft
Nmm x 0.142 = ozin
mPas = cPs
Shelf life
For product information contact:
12
months
Anabond Limited
36, Type II, Dr. VSI Estate,
Thiruvanmiyur,
Chennai 600041 India
Ph: +91 (44) 23460041/42/43
Fax: +91 (44) 2346 0048
e-mail: marketing@anabond.com
web: www.anabond.com
Disclaimer
The data contained herein are furnished for
information only and are believed to be reliable.
We cannot assume responsibility for the results
obtained by others over whose methods we
have no control. It is the users responsibility to
determine suitability fo the users purpose of
any production methods mentioned herein and
Page 2 of 2