Micro-Plus Treatment Systems are available in a variety of size capacities, from the Micro-Plus 2, which can be used on equipment using up to 12.5 gallons of water per day, to the Micro-Plus 16 for treating up to 100 gallons of water per day. Micro-Plus systems are designed and manufactured to eliminate or control the three primary water-related problems: lime scale, silt and sediment, and objectionable tastes and odors encountered in ice makers, coffee urns and other equipment. These problems all reduce the designed capacities of this equipment, and they cause operation and service costs to increase.
Micro-Plus Treatment Systems are available in a variety of size capacities, from the Micro-Plus 2, which can be used on equipment using up to 12.5 gallons of water per day, to the Micro-Plus 16 for treating up to 100 gallons of water per day. Micro-Plus systems are designed and manufactured to eliminate or control the three primary water-related problems: lime scale, silt and sediment, and objectionable tastes and odors encountered in ice makers, coffee urns and other equipment. These problems all reduce the designed capacities of this equipment, and they cause operation and service costs to increase.
Micro-Plus Treatment Systems are available in a variety of size capacities, from the Micro-Plus 2, which can be used on equipment using up to 12.5 gallons of water per day, to the Micro-Plus 16 for treating up to 100 gallons of water per day. Micro-Plus systems are designed and manufactured to eliminate or control the three primary water-related problems: lime scale, silt and sediment, and objectionable tastes and odors encountered in ice makers, coffee urns and other equipment. These problems all reduce the designed capacities of this equipment, and they cause operation and service costs to increase.
Micro-Plus Treatment Systems are available in a variety of size capacities, from the Micro-Plus 2, which can be used on equipment using up to 12.5 gallons of water per day, to the Micro-Plus 16 for treating up to 100 gallons of water per day. Micro-Plus systems are designed and manufactured to eliminate or control the three primary water-related problems: lime scale, silt and sediment, and objectionable tastes and odors encountered in ice makers, coffee urns and other equipment. These problems all reduce the designed capacities of this equipment, and they cause operation and service costs to increase.
MICRO-PLUS
Complete Inline Filtration & Treatment for Ice Machines,
Coffee Urns and other equipment
1/4” PT tapping permits use of
flare or compression fittings,
or Quick-Disconnect plugs.
STU RL)
Su ae eu Ue ee
suspended matter
See Ue ele
Rye eee mele
ogi on
ried bthMICRO-PLUS,
FILTER
(US FEEDER
20 micron polyethylene
disk pre-fiters water
prior to entering unit.
Deflectoris
designed to
direct he water
flow evenly
accross the fil
terbed. Italso
liminates the
potential for
channelling
FDA-approved food grade
hexametaphosphate orys
tals which slowly dissolve
into the water and inhibit
the formation of ime scale.
This is done by stabilizing
the hardnass minarals so
they do not precipitate and
form deposits.
Manufactured with 1/4” FPT tapping
that allows for easy installation with
flare or compression fittings. 1/4" or
3/8". The 1/4 tapping also accepts
the standard QC plug for instalation
Constructed of poly-
propylene material
1 Y) which meets FDA and
NSF standards for use
in drinking water sys
tems.
High density polyethylene filter
ise traps suspended particles as
small a§ 20 microns.
Special blend of a highly absorbent activat-
‘ad carbon with the ability to absorb larger
amounts of chemicals such as chlorine and
‘ammonia so that there is no unpleasant
taste or odor in water.
Eliminating the problems associated with the water used in ice
machines, coffee urns and brewers, beverage machines, and
‘ther equipment or systems such as humidifiers, steamers, etc. is
what the MICRO-PLUS™ Treatment system is all about.
Is a FILTER . . Objectionable tastes and odors are eliminated.
Large amounts of chlorine and other chemicals that cause this,
condition are removed through the use of a special virgin blend
of high grade activated carbon. And, silt and sediment particles,
even as small as 20 microns, are trapped and held by specially
designed filter and screen discs.
I's @ FEEDER . . .The Micro-Plus System contains 6R Micromet!
2 specialized, slowly soluble, food grade phosphate that feeds
into the water supply stabilizing the hardness minerals contained
in the water thereby eliminating scale formation. Maintainance
costs, due to scale buildup in orifices, valves, etc, are reduced. In
‘addition, the 6R Micromet is NSF certified
I's MORE . . The Micro-Plus™ System offers a choice of four
convenient sizes. And when properly sized, Micro-Plus™ treat-
‘ment will last up to six months.
APPLICATIONS
Gallons of
Number Systems Connections Water per Day
4815-W3| MICRO-PLUS 2/4" FT 125
4812-3 MICRO-PLUS 4 1/4"FPT B
4513-Y8 — MICRO-PLUS 8 1/4"FPT 50
4614-Y8— MICRO-PLUS 16 1/4"FPT 100
TREATMENT CAPACITIES
Ice Makers
Up to 125 ibs. of ice per day
Up to 250 tbs of ice per day
Up to 500 ibs. of ice per day
Up to 1000 is. of ice per day
Coffee Makers
25 Ibs. of coffee (1,250 cups) per wk
50 bs. of coffee (2,500 cups) per wk
100 lbs. of coffee (5,000 cups) per wk.
200 ls. of coffee (10,000 cups} per wt. s
“This connection allows forthe selection and use of compression or flare fittings, or “quick-disconnect™ plug fitings:
Nu-Calgon
Wholesaler, Inc’
(314) 469-7000 « 1-800-554-5499
2008 Altom Court, St. Louis, MO 63146
www.nucalgon.com