A safety procedure outlines that when performing holiday testing in a confined space, a standby person should monitor activities inside and respond to emergencies. Workers inside must wear a safety harness and helmet, and scaffolding should provide proper access when needed. Any lighting used must not exceed 24 volts, be attached to an isolation transformer when possible, and holiday testing machines and cables should be intact and insulated.
A safety procedure outlines that when performing holiday testing in a confined space, a standby person should monitor activities inside and respond to emergencies. Workers inside must wear a safety harness and helmet, and scaffolding should provide proper access when needed. Any lighting used must not exceed 24 volts, be attached to an isolation transformer when possible, and holiday testing machines and cables should be intact and insulated.
A safety procedure outlines that when performing holiday testing in a confined space, a standby person should monitor activities inside and respond to emergencies. Workers inside must wear a safety harness and helmet, and scaffolding should provide proper access when needed. Any lighting used must not exceed 24 volts, be attached to an isolation transformer when possible, and holiday testing machines and cables should be intact and insulated.
A safety procedure outlines that when performing holiday testing in a confined space, a standby person should monitor activities inside and respond to emergencies. Workers inside must wear a safety harness and helmet, and scaffolding should provide proper access when needed. Any lighting used must not exceed 24 volts, be attached to an isolation transformer when possible, and holiday testing machines and cables should be intact and insulated.
A man should be stand-by outside the confined space so as to monitor activities
going inside and to take proper actions in case of emergency. Safety harness and Helmet should be worn while entering the confined space where holiday testing is to be carried out. Proper scaffolding for accessing the vessel where necessary. The illumination bulb used should be attached to isolation transformer and the voltage should not exceed 24V in case isolation transformer is not available The holiday testing machine should be properly insulated and no cracks/cuts should be there on the cables.