{oan ~/UITM/PER/T/2/3/16——_______
No. tem é
Nama Peralatan _: PCB DRILL STATION
Kuan Diperkan :2SET
1. Jenama dan Model yang dtawarkan:
2. Negara Pembuat
3, Penentuan (Specification):
(Gila 1 ka menepati spesifitasi dan X jka fdak, pada ruengan call)
General Features
‘The station should provide steadiness whenneeded
eg. for driling very fine holes. Itcan hold the
rotary tool both vertically and horizontally. Can
easily be controlled using one hand, adjustable
height and depth stop included. Table is milled and
fitted with a scale and fence. Headstock is die-cast
‘aluminum and tits through $0? in both directions.
The rotary tool must be quiet, precise and
efficient. tt has stable housing forthe ground stee!
spindle and separate on/off switch and speed
‘control dial for perfect speed every time. Usable
{or extended periods of time and capable of
producing variable speeds between 5000 and
20000 rpm.
53Drill station Specifications:
Table size 4-3/4" x8-5/8" (120
220m)
Throat Capacity, 5-4/2" (140mm)
Travel 1-3/16" (30mm)
bottom of head)
Height (Top of table to | 7-1/2 (190mm)
Weight 4 tbs (4532)
‘Tool specification:
Maximum Power 1/8hp (100 watts)
Speed 5000 to 20,000 rpm
Collar 3/4" (20mm)
Housing 3.75" (asm)
Length 9° (230mm)
Cord ength 78
Voltage 220240 Ae, Gore
Weight 1.3 bs (5808)
ais Grinding bits
Grinding wheels
Saw blade
Cut off blade
Micro deil bit 0.5mm
Wheel brush
Micro dril bit 0.8mm
Miling bit 2.3mm
1.8mm,
Diamond bit sphere
544s.
4a,
48.
‘Additional Specifications:
44.
Manual and Brochures
Ail Users, Operating and Teining manuals
are to be supplied with the equipment, and
rust be either in Bahasa Malaysia or in
English
‘Additional Accessories
‘tachment or Optional tems that ae not
mentioned above but recommended upon
commissioning of the equipment need to be
specified with Catalogue Attachment and
Annex sheets by Tenderer.
Delivery Period
Specify the durations and delivery modes
‘upon confirmation of order.
Installation, Test and Commissioning,
‘Must be conducted by Manufacturer
Authorized Personnel.
‘Testing and Commissioning
Demonstration to show the functioning and
{ull operation of the equipment at site,
Warranty Period
Should not less than 1 year from the date off
tallation and commissioning and handling
cover. Ail ter sales service shall be provided
by manufacturer authorized service center
in Malays. Covering all Labour Service,
Calibration and Standard Manufacturer
Warranty.
55a,
47.
as.
‘After Sales Service
‘Must be provided by manufacturer's
‘Authorised Service Agent in Malaysia, who
shall demonstrate that they have the
required stock, hot standby spare units, and
spare parts stock as well as the required
expertise to carry out the service for UTM
In atimely and efficient manner. Where
‘ever possible, the equipment to be supplied
should be repaired within 10 working days,
falling which, a replacement unit should be
brought in to substitute the unit which has
falled.
Initial and Continued Training
Equipment supplied to UTM is of utmost
importance. Equipment operation shall be
provided at UITM site, and should include:
Installation / Operation / Basic
Maintenance.
Training
‘Must be provided during the intial Setup,
and is to be conducted at UITM site, for at
least 3 staff for a period of 3 day. This
training must be conducted by Certified
‘Trainer, who must have at least 5 years
‘experience in providing training in this field,
‘and must be appointed by the equipment
manufacturer. Each staff must undergo
hands on training .At the end of this
training, each staff must have a portfolio of
the work that they have achieved
564.10. Service Contract
‘The pricing must include 1 year service
contract including all labour service and
calibration. Spare Parts will be quoted
separately.
swore
Allother related materials, components and
cabling, which are not specified but required to
ensure full operation of above item must be
supplied.
Hands on training of instrument operation shall be
provided for at least 4 UITM staff by the qualified
engineers from authorized distributor or main
manufacturer,
Tempoh Jaminan (Minimum 1 Tahun) :
Tempoh Akhir Sah LakuTawaran —-:-- 90 hari
Tempoh Serahan