Professional Documents
Culture Documents
How To Proper Shut Down & Restart EVA 4000 SAN Storage
How To Proper Shut Down & Restart EVA 4000 SAN Storage
How To Proper Shut Down & Restart EVA 4000 SAN Storage
Stop the IO/stop all hosts first except the one on which the Command view EVA
is running. If this host is a dedicated SMA, then no LUNs are presented to it, so
open the Command View EVA application. If you dont have any dedicated SMA, stop
its applications first but let the Command View EVA running.
POWER ON
i) switch on the LAN switches
j) switch on the SAN switches
k) switch on the SMA/EVA management host
l) Power on the circuit breakers on both EVAs PDUs
m) wait 3 minutes and check if all drive enclosures disks are ready (LEDs)
n) Power on the upper HSV controller. It will become the master controller
o) Wait 10 seconds and power up the lower HSV controller
p) verify that the OCP panel is showing the EVAs name and WWN
q) launch the Command View EVA. If the EVA is not visible, click the discovery
If its still not visible restart the SMA
r) via the Command View EVA check the array status to ensure that everything is
opeating properly