Professional Documents
Culture Documents
NF68S-M2 0601C B
NF68S-M2 0601C B
The content of this users manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this users manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction ............................................. 3
1.1
1.2
1.3
1.4
1.5
Operation System................................................................21
Raid Arrays.........................................................................21
How RAID Works.................................................................21
Introduction........................................................................28
System Requirement............................................................28
Installation .........................................................................29
WarpSpeeder III ................................................................30
German................................................................................................36
France..................................................................................................38
Italian..................................................................................................40
Spanish ................................................................................................42
Portuguese...........................................................................................44
Polish...................................................................................................46
Russian ................................................................................................48
Arabic..................................................................................................50
Japanese ..............................................................................................52
GF7025-M2
CHAPTER 1: INTRODUCTION
1.1
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
Prepare a dry and stable work ing environment with
sufficie nt lighting.
1.2
PACKAGE CHECKLIST
HDD Cable X 1
Se rial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Use rs Manual X 1
Fully Se tup Drive r C D X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Motherboard Manual
1.3
CPU
FSB
Chipset
Ver 6.x
Socket AM2
Socket AM2
Sempron processors
Sempron processors
computing
computing
Support HyperTransport
Support HyperTransport
ITE 8716F
ITE 8716F
Provides the most commonly used legacy Super Provides the most commonly used legacy Super
Super I/O
I/O functionality.
I/O functionality.
H/W Monitor
H/W Monitor
Each DIMM supports 256MB/512MB/1GB/ 2GB Each DIMM supports 256MB/512MB/1GB/ 2GB
Main
DDR2
DDR2
Memory
supported
supported
Graphics
IDE
SATA II
LAN
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit 10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for RTL 8211B only)
GF7025-M2
Ver 5.x
Sound
Slots
On Board
Connector
Back Panel
I/O
Ver 6.x
ALC888
ALC662
PCI slot
x2
PCI slot
x1
x1
x1
x1
Floppy connector
x1
Floppy connector
x1
x1
x1
IDE Connector
x1
IDE Connector
x1
SATA Connector
x4
SATA Connector
x4
x1
x1
x1
x1
CD-in Connector
x1
CD-in Connector
x1
x1
x1
x1
x1
x1
x1
x1
x1
USB connector
x3
USB connector
x3
x1
x1
x1
x1
x1
x1
PS/2 Keyboard
x1
PS/2 Keyboard
x1
PS/2 Mouse
x1
PS/2 Mouse
x1
VGA port
x1
VGA port
x1
DVI-D port
x1
DVI-D port
x1
LAN port
x1
LAN port
x1
USB Port
x4
USB Port
x4
Audio Jack
x6
Audio Jack
x3
x2
Motherboard Manual
1.4
X
Z
\
^
Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x)
Port
Blue
Green
Pink
Orange
Black
Grey
2-Channel
Line-In
Line-Out
Mic In
4-Channel
Line-In
Front Speaker Out
Mic In
6-Channel/8-Channel
Line-In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
GF7025-M2
1.5
JKB MS1
JCFA N1
JATX PWR2
VGA
DI MMB1
A M2
DI MMA1
Socket
DVI-D
JUSB1
JATXP WR1
IDE1
JRJ45USB1
AUDIO1
(for Ver 5.x)
JA UDIO1
(for Ver 6.x)
JNFA N1(Opt ional)
J AUDIOF1
GeForce
7025 /
NF630a
JUSB3
PCI-EX1_1
J US B4
JSP DIF_OUT1
J US B2
PCI-EX16
L AN
BIOS JCMOS1
BAT1
PCI1
SATA2
SATA4
Codec
PCI2
JCDIN1
Super I/O
S ATA1
SATA3
J PA NEL1
JP RNT1
FDD1
JSFAN1
JCOM1
Motherboard Manual
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
GF7025-M2
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
Motherboard Manual
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control (By Fan)
1
2
3
4
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM
rate sense
JSFAN1
3
Note:
The JCFAN1 supports 4-pin head c onnector. The J SFAN1 and JNFAN1 s upport 3-pin
head connectors. When connecting with wires onto connectors, pleas e note that the red
wire is the positi ve and s hould be c onnected to pin#2, and the bl ac k wire is Ground and
shoul d be connected to GND.
10
GF7025-M2
2.3
DIM MA1
DIM MB1
A. Memory Modules
1.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
11
Motherboard Manual
B. Memory Capacity
Total Memory
Size
DIMM Socket
Location
DIMMA1
256MB/512MB/1GB/2GB
DIMMB1
256MB/512MB/1GB/2GB
DDR2 Module
Max is 4GB.
DIMMA1
O
DIMMB1
X
Disabled
Enabled
12
GF7025-M2
2.4
34
33
40
39
13
Motherboard Manual
PCI-EX1_1
PCI-EX16
PCI1
PCI2
14
GF7025-M2
Pin opened
3.2
Pin closed
Pin1-2 closed
SLP
PWR_LED
On/ Off
+ + -
9
1
+ SPK
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Functio n
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
16
8
RST
HLED
Assignment
Sleep control
Ground
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Functio n
Sleep button
N/A
Power LED
Power-on button
15
Motherboard Manual
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
16
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
GF7025-M2
JUSB3
JUSB2
JUSB4
Pin
Assignment
1
2
+5V (fused)
+5V (fused)
3
4
USBUSB-
5
6
USB+
USB+
10
7
8
Ground
Ground
9
10
Key
NC
SATA2 SATA4
SATA1 SATA3
1
Pin
1
2
3
4
5
6
7
Assignment
Ground
T X+
T XGround
RXRX+
Ground
17
Motherboard Manual
10
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
Pin
1
2
3
4
18
Assignment
Left Channel
Input
Ground
Ground
Right Channel
Input
GF7025-M2
Pin
Assignment
1
2
3
+5V
SPDIF_OUT
Ground
19
Motherboard Manual
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Assignment
25
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key
20
10
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Carrier detect
Received data
T ransmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
Key
GF7025-M2
Supports Windows XP Home/Prof essional Edition, and Windows 2000 Prof essional.
4.2
RAID ARRAYS
4.3
RAID 0:
The controller stripes data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Blo ck 1
Bl ock 3
Bl ock 5
Block 2
Bl ock 4
Bl ock 6
21
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Block 1
Block 2
Block 3
22
Block 1
Block 2
Block 3
GF7025-M2
RAID 0+1:
RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1
solution for improved performance plus resiliency.
GeForce
7025
Block 1
Bl ock 3
Bl ock 5
Bl ock 2
Bl ock 4
Bl ock 6
Bl ock 1
Block 3
Block 5
Block 2
Block 4
Block 6
23
Motherboard Manual
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good perf ormance, good f ault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
perf ormance can be CPU intensiv e.
Fault Tolerance: Yes.
Dis k 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Dis k 2
GeForce
7025
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Dis k 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
24
For more detailed setup information, please refer to the Driver CD, or go to
http://www.nvidia.com/page/pg_20011106217193.html to download NVIDIA nForce Tutorial Flash.
GF7025-M2
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didnt show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
25
Motherboard Manual
5.2
Beep Sound
One long beep followed by two short
beeps
High-low siren sound
Meaning
Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
5.3
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See Close CMOS Header: JCMOS1 section)
2. Wait for seconds.
3. Power on the system again.
26
GF7025-M2
5.4
TROUBLESHOOT ING
Probable
Solution
1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light dont illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
1.
27
Motherboard Manual
6.1
6.2
SYST EM REQUIREMENT
28
GF7025-M2
6.3
1. Execute the setup execution file, and then the following dialog will pop
up. Please click Next button and follow the default procedure to
install.
2. When you see the following dialog in setup procedure, it means setup
is completed. Click Finish button.
Usage :
The following figures are only for reference, the screen printed in this
user manual will change according to your motherboard on hand.
29
Motherboard Manual
6.4
WARPSPEEDER III
1. Desktop Icon:
After the [WarpSpeeder III] has been installed, a [WarpSpeeder III]
icon will appear on the desktop, just like the icon shown below.
2. Main Panel
If you double-click the desktop icon, [WarpSpeeder III] will be
launched. Please refer to the following figure; the utilitys first window
you will see is Main Panel.
30
a.
Display the CPU Speed, CPU external clock, Memory clock, VGA
clock, and PCI clock information.
b.
GF7025-M2
3. Overclock/Overvoltage Panel
Click the Overclock/Overvoltage button in the Main Panel, the button
will be highlighted and the Overclock/Overvoltage Panel will show
up as the following figure. As you can see, the Overclock Panel is
on the right side, and the Overvoltage Panel is on the left side.
31
Motherboard Manual
Auto-Overclock:
User can click this button and [WarpSpeeder III] will set the best
and stable performance and frequency automatically. A warning
dialog as below will show up to notify you that the system may
become unstable, click on OK to proceed.
Verify:
If you use the Manual Adjust bar to adjust the CPU frequency,
then you can click this button and [WarpSpeeder III] will proceed
a testing for current frequency. If the testing is ok, then the current
frequency will be saved into system registry. If the testing fails,
system will do a fail-safe rebooting. After reboot, the
[WarpSpeeder III] utility will restore to the hardware default
setting.
Warning:
Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let [WarpSpeeder III]
automatically gets the best result f or y ou.
32
c.
d.
Recovery:
Click this button and the [WarpSpeeder III] utility will restore all
values to the hardware default setting.
GF7025-M2
b.
CPU Voltage:
This function allows user to adjust CPU voltage.
increase or - to decrease the CPU voltage.
Click on + to
Memory Voltage:
This function allows user to adjust Memory voltage.
to increase or - to decrease the Memory voltage.
Click on +
33
Motherboard Manual
5. About Panel
Click the about button in Main Panel, the button will be highlighted
and the About Panel will show up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the the version number of [WarpSpeeder III] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder III]
divide these features to separate panels. If one chipset is not on
board, the correlative button in Main panel will be disabled, but will
not interfere other panels functions. This property can make
[WarpSpeeder III] utility more robust.
34
GF7025-M2
35
Motherboard Manual
Ver 6.x
Sockel AM2
FSB
Chipsatz
Super E/A
Sempron Prozessoren
Sempron Prozessoren
Die AMD 64-Architektur untersttzt eine 32-Bit- Die AMD 64-Architektur untersttzt eine 32-Bitund 64-Bit-Datenverarbeitung
und 64-Bit-Datenverarbeitung
Untersttzt HyperTransport mit einer Bandbreite Untersttzt HyperTransport mit einer Bandbreite
von bis zu 1 GHz
ITE 8716F
ITE 8716F
E/A-Funktionen.
E/A-Funktionen.
Umgebungskontrolle,
Umgebungskontrolle,
Hardware-berwachung
Hardware-berwachung
Lfterdrehzahl-Controller
Lfterdrehzahl-Controller
DDR2 DIMM-Steckpltze x 2
DDR2 DIMM-Steckpltze x 2
2GB DDR2.
er
untersttzt.
untersttzt.
Videospeicher
Videospeicher
Integrierter IDE-Controller
Integrierter IDE-Controller
Master-Modus
Master-Modus
Grafik
IDE
SATA II
Konform mit der SATA-Spezifikation Version 2.0. Konform mit der SATA-Spezifikation Version 2.0.
LAN
36
Halb-/ Vollduplex-Funktion
Halb-/ Vollduplex-Funktion
GF7025-M2
Ver 5.x
Ver 6.x
ALC888
ALC662
Audio-Codec 7.1-Kanal-Audioausgabe
5.1-Kanal-Audioausgabe
Onboard-Ans
chluss
Rckseiten-E
/A
Platinengre
.
Sonderfunkti
onen
OS-Unterstt
zung
PCI-Steckplatz
x2
PCI-Steckplatz
x1
x2
x1
x1
x1
Diskettenlaufwerkanschluss
x1
Diskettenlaufwerkanschluss
x1
Druckeranschluss Anschluss
x1
Druckeranschluss Anschluss
x1
IDE-Anschluss
x1
IDE-Anschluss
x1
SATA-Anschluss
x4
SATA-Anschluss
x4
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
CD-IN-Anschluss
x1
CD-IN-Anschluss
x1
S/PDIF- Ausgangsanschluss
x1
S/PDIF- Ausgangsanschluss
x1
CPU-Lfter-Sockel
x1
CPU-Lfter-Sockel
x1
System-Lfter-Sockel
x1
System-Lfter-Sockel
x1
"CMOS lschen"-Sockel
x1
"CMOS lschen"-Sockel
x1
USB-Anschluss
x3
USB-Anschluss
x3
Serieller Anschluss
x1
Serieller Anschluss
x1
Stromanschluss (24-polig)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
PS/2-Maus
x1
VGA-Anschluss
x1
VGA-Anschluss
x1
DVI-D-Anschluss
x1
DVI-D-Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss
x6
Audioanschluss
x3
entfernen.
entfernen.
37
Motherboard Manual
FRANCE
Ver 5.x
UC
Ver 6.x
Socket AM2
Socket AM2
Athlon 64 x2 / Sempron
Athlon 64 x2 / Sempron
bits
Prend en charge Hyper Transport et CoolnQuiet Prend en charge Hyper Transport et CoolnQuiet
Bus frontal
Chipset
Super E/S
Mmoire
principale
Graphiques
IDE
SATA II
ITE 8716F
ITE 8716F
Moniteur de matriel
Moniteur de matriel
Module de mmoire DDR2 mode double voie Module de mmoire DDR2 mode double voie
Prend en charge la DDR2 533 / 667 / 800
charge
charge
Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /
133
133
10 / 100 / 1000 Mb/s ngociation automatique 10 / 100 / 1000 Mb/s ngociation automatique
LAN
38
8211B uniquement)
8211B uniquement)
GF7025-M2
Ver 5.x
Ver 6.x
ALC662
ALC888
Codec audio Sortie audio 7.1 voies
Fentes
Connecteur
embarqu
Fente PCI
x2
Fente PCI
x2
x1
x1
x1
x1
Connecteur de disquette
Connecteur de Port d'imprimante
x1
x1
Connecteur de disquette
Connecteur de Port d'imprimante
x1
x1
Connecteur IDE
x1
Connecteur IDE
x1
Connecteur SATA
x4
Connecteur SATA
x4
x1
x1
Connecteur d'entre CD
x1
Connecteur d'entre CD
x1
x1
x1
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
x1
x1
x1
x1
Connecteur USB
x3
Connecteur USB
x3
x1
x1
Connecteur d'alimentation
x1
Connecteur d'alimentation
x1
x1
Connecteur d'alimentation
(24 broches)
Connecteur d'alimentation
(24 broches)
(4 broches)
x1
(4 broches)
Clavier PS/2
x1
Clavier PS/2
Souris PS/2
x1
Souris PS/2
x1
E/S du
Port VGA
x1
Port VGA
x1
panneau
Port DVI-D
x1
Port DVI-D
x1
arrire
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Fiche audio
x6
Fiche audio
x3
Dimensions
de la carte
x1
Fonctionnali
ts
spciales
Support SE Biostar se rserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans pravis. supprimer le support de SE avec ou sans pravis.
39
Motherboard Manual
IT ALIAN
Ver 5.x
Socket AM2
Ver 6.x
Socket AM2
Athlon 64 x 2 / Sempro n
Athlon 64 x 2/ Sempron
computazione 32 e 64 bit
computazione 32 e 64 bit
Supporto di Hyper Tra nsport e Cool nQuiet Supporto di Hyper Tra nsport e Cool nQuiet
FSB
Chipset
larghezza di ba nda
ITE 8716F
ITE 8716F
usate pi comunemente.
usate pi comunemente.
Monitoraggio hardware
Monitoraggio hardware
Memoria
512MB e 1GB/2GB
512MB e 1GB/2GB
principale
supportati
supportati
7025/NF 630a
7025/NF 630a
512MB
512MB
100 / 133
100 / 133
Gb/s.
Gb/s.
Super I/O
Grafica
IDE
SATA II
LAN
40
GF7025-M2
Ver 5.x
Codec
audio
Alloggi
Connettori
su scheda
Ver 6.x
ALC888
ALC662
Alloggio PCI
x2
Alloggio PCI
x1
x1
x1
x1
x1
x1
x1
x1
Connettore IDE
x1
Connettore IDE
x1
x2
Connettore SATA
x4
Connettore SATA
x4
x1
x1
x1
x1
Connettore CD-in
x1
Connettore CD-in
x1
x1
x1
x1
x1
x1
x1
x1
x1
Connettore USB
x3
Connettore USB
x3
x1
x1
Connettore alimentazione
x1
Connettore alimentazione
x1
x1
Connettore alimentazione
(24 pin)
Connettore alimentazione
(24 pin)
(4 pi n)
x1
(4 pi n)
Tastiera PS/2
x1
Tastiera PS/2
x1
Mouse PS/2
x1
Mouse PS/2
x1
I/O
Porta VGA
x1
Porta VGA
x1
pannello
Porta DVI-D
x1
Porta DVI-D
x1
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Connettore audio
x6
Connettore audio
x3
Dimension
i scheda
Caratterist
iche
speciali
Sistemi
operativi
supportati
41
Motherboard Manual
SPANISH
Ver 5.x
CPU
FSB
Conjunto de
chips
Ver 6.x
Conector AM2
Conector AM2
Athlon 64 x2 / Sempron
32 y 64 bits
CoolnQuiet
CoolnQuiet
Admite HyperTransport con un ancho de banda Admite HyperTransport con un ancho de banda
de hasta1 GHz
de hasta1 GHz
ITE 8716F
ITE 8716F
Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso
ms comn Sper E/S.
Monitor hardware
Monitor hardware
Memoria
1GB/2GB
1GB/2GB
principal
7025/NF630a
7025/NF630a
512MB
512MB
Sper E/S
Grficos
IDE
SATA II
Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Negociacin de 10 / 100 / 1000 Mb/s (el ancho Negociacin de 10 / 100 / 1000 Mb/s (el ancho
Red Local
42
8211B )
8211B )
GF7025-M2
Ver 5.x
Cdecs de
sonido
Ranuras
Conectores
en placa
Ver 6.x
ALC888
ALC662
Ranura PCI
X2
Ranura PCI
X1
X2
X1
X1
X1
X1
X1
X1
X1
Conector IDE
X1
Conector IDE
X1
Conector SATA
X4
Conector SATA
X4
X1
X1
X1
X1
Conector de entrada de CD
X1
Conector de entrada de CD
X1
X1
X1
X1
X1
X1
X1
Conector USB
X3
Conector USB
X3
X1
X1
Conector de alimentacin
X1
Conector de alimentacin
X1
X1
Conector de alimentacin
(24 patillas)
Conector de alimentacin
(24 patillas)
(4 patillas)
X1
(4 patillas)
Teclado PS/2
X1
Teclado PS/2
Ratn PS/2
X1
Ratn PS/2
X1
Panel
Puerto VGA
X1
Puerto VGA
X1
trasero de
Puerto DVI-D
X1
Puerto DVI-D
X1
E/S
X1
X1
Puerto USB
X4
Puerto USB
X4
Conector de sonido
X6
Conector de sonido
X3
Tamao de
la placa
Funciones
especiales
X1
sistema
Biostar se reserva el derecho de aadir o retirar Biostar se reserva el derecho de aadir o retirar
operativo
el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
43
Motherboard Manual
PORT UGUESE
Ver 5.x
CPU
FSB
Chipset
Ver 6.x
Socket AM2
Socket AM2
Athlon 64 x2 / Sempron
A arquitectura AMD 64 permite uma computao A arquitectura AMD 64 permite uma computao
de 32 e 64 bits
de 32 e 64 bits
CoolnQuiet
CoolnQuiet
Suporta a tecnologia HyperTransport com uma Suporta a tecnologia HyperTransport com uma
largura de banda at1 GHz
ITE 8716F
ITE 8716F
Monitorizao do hardware
Monitorizao do hardware
Memria
principal
no so suportados
no so suportados
Placa
grfica
IDE
SATA II
LAN
44
Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
verso 2.0.
verso 2.0.
Capacidade semi/full-duplex
Capacidade semi/full-duplex
GF7025-M2
Ver 5.x
Codec de
som
Ranhuras
Conectores
na placa
Ver 6.x
ALC888
ALC662
Ranhura PCI
x2
Ranhura PCI
x2
x1
x1
x1
x1
x1
x1
x1
x1
Conector IDE
x1
Conector IDE
x1
Conector SATA
x4
Conector SATA
x4
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
x1
Conector USB
x3
Conector USB
x3
x1
x1
Conector de alimentao
x1
Conector de alimentao
x1
x1
Conector de alimentao
(24 pinos)
Conector de alimentao
(24 pinos)
(4 pinos)
Entradas/S
adas no
painel
traseiro
Tamanho
da placa
x1
(4 pinos)
Teclado PS/2
x1
Teclado PS/2
x1
Rato PS/2
x1
Rato PS/2
x1
Porta VGA
x1
Porta VGA
x1
Porta DVI-D
x1
Porta DVI-D
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de udio
x6
Tomada de udio
x3
Caractersti
cas
especiais
Sistemas
operativos
suportados
45
Motherboard Manual
POLISH
Ver 5.x
Procesor
FSB
Chipset
Ver 6.x
Socket AM2
Socket AM2
Sempron Procesory
Sempron Procesory
32 i 64 bitowe
32 i 64 bitowe
Obsuga HyperTransport o szerokoci pasma do1 Obsuga HyperTransport o szerokoci pasma do1
GHz
GHz
Pami
gwna
kanau
kanau
ITE 8716F
ITE 8716F
Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super
Super I/O
Grafika
IDE
SATA II
I/O.
I/O.
Monitor H/W
Monitor H/W
7025/NF630a
7025/NF630a
wynosi 512MB
wynosi 512MB
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsuga PIO tryb 0~4,
10 / 100 / 1000 Mb/s z automatyczn negocjacj 10 / 100 / 1000 Mb/s z automatyczn negocjacj
LAN
46
szybkoci (Pasmo gigabitowe wycznie dla RTL szybkoci (Pasmo gigabitowe wycznie dla RTL
8211B )
8211B )
dupleksu
dupleksu
GF7025-M2
Ver 5.x
Kodek
dwikowy
Gniazda
Zcza
wbudowane
Ver 6.x
ALC888
ALC662
Gniazdo PCI
x2
Gniazdo PCI
x2
x1
x1
x1
x1
x1
x1
x1
x1
Zcze IDE
x1
Zcze IDE
x1
Zcze SATA
x4
Zcze SATA
x4
x1
x1
x1
x1
Zcze wejcia CD
x1
Zcze wejcia CD
x1
x1
x1
procesora
x1
Back Panel
I/O
Wymiary
CMOS
x1
CMOS
x1
Zcze USB
x3
Zcze USB
x3
x1
x1
x1
x1
x1
x1
Klawiatura PS/2
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Mysz PS/2
x1
Port VGA
x1
Port VGA
x1
Port DVI-D
x1
Port DVI-D
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio
x6
Gniazdo audio
x3
Obsluga
systemu
pyty
Funkcje
specjalne
go
47
Motherboard Manual
RUSSIAN
Ver 5.x
AM2
CPU
AMD 64
) 32 64
FSB
Ver 6.x
AM2
AMD Athlon 64 / Athlon 64 FX /
Athlon 64 X2 / Sempron
AMD 64
32 64
HyperTransport
1G
HyperTransport
1G
DDR2 DIMM x 2
4
DDR2 DIMM x 2
4
DDR2
ITE 8716F
ITE 8716F
Super I/O.
Super I/O.
Super I/O
IDE
SATA II
GeForce
GeForce
7025/NF630a
7025/NF630a
512
512
PIO 0~4,
ATA
ATA
3 /.
3 /.
SATA 2.0. SATA 2.0.
Realtek RTL 8201N / 8211B () Realtek RTL 8201N / 8211B ()
48
GF7025-M2
Ver 5.x
ALC888
7.1
High-Definition
PCI
x2
PCI Express x16
x1
PCI Express x 1
x1
x1
x1
IDE
x1
SATA
x4
x1
x1
CD
x1
S/PDIF
x1
x1
x1
CMOS
x1
USB-
x3
x1
(24 )
x1
(4 )
x1
PS/2
x1
PS/2
x1
VGA
x1
DVI-D
x1
LAN
x1
USB-
x4
x6
208 () X 244 ()
RAID 0 / 1 / 5 / 0+1
Ver 6.x
ALC662
5.1
High-Definition
PCI
x2
PCI Express x16
x1
PCI Express x 1
x1
x1
x1
IDE
x1
SATA
x4
x1
x1
CD
x1
S/PDIF
x1
x1
x1
CMOS
x1
USB-
x3
x1
(24 )
x1
(4 )
x1
PS/2
x1
PS/2
x1
VGA
x1
DVI-D
x1
LAN
x1
USB-
x4
x3
208 () X 244 ()
RAID 0 / 1 / 5 / 0+1
49
Motherboard Manual
ARABIC
Ver 6.x
Ver 5.x
AM2
AM2
Athlon 64 x2 / Sempron
Athlon 64 x2 / Sempron
32 64 AMD 64
32 64AMD 64
1000 HyperTransport
1000 HyperTransport
DDR2 DIMM
DDR2 DIMM
Super I/O
IDE
SATA II
2/1
2/1
DDR2
DDR2
ECC DIMM
ECC DIMM
ITE 8716F
ITE 8716F
Super I/O .
Super I/O .
ITE""Smart Guardian
ITE""Smart Guardian
GeForce 7025/NF630a
GeForce 7025/NF630a
512
512
IDE
IDE
Serial ATA
Serial ATA
3 /.
3 /.
2.0.SATA
2.0.SATA
)( RTL 8211B
)( RTL 8211B
100/10 / 1 /
100/10 / 1 /
RTL 8211B
RTL 8211B
50
GF7025-M2
Ver 6.x
Ver 5.x
ALC888
ALC662
5.1
7.1
PCI
PCI
PCI Expressx16
PCI Expressx16
PCI Express x 1
PCI Express x 1
IDE
IDE
SATA
SATA
CD-IN
CD-IN
S/PDIF
S/PDIF
CMOS
CMOS
USB
USB
)24(
)24(
) 4(
) 4(
PS/2
PS/2
PS/2
PS/2
VGA
VGA
DVI-D
DVI-D
USB
USB
RAID 0 / 1 / 5 / 0+1
RAID 0 / 1 / 5 / 0+1
208 ) ( 244 X ) (
208 ) ( 244 X ) (
51
Biostar
Biostar
Motherboard Manual
JAPANESE
Ver 5.x
CPU
Ver 6.x
Socket AM2
Socket AM2
Sempron
Sempron
FSB
1GHz
1GHz
DDR2 DIMM x 2
DDR2 DIMM x 2
4GB
4GB
DIMM 256MB/512MB & 1GB/2GB DDR2 DIMM 256MB/512MB & 1GB/2GB DDR2
DDR2
DDR2
DIMMECC DIMM
DIMMECC DIMM
ITE 8716F
ITE 8716F
Super I/O
H/W
H/W
ITE
ITE
GeForce 7025/NF630a
GeForce 7025/NF630a
512MB
512MB
IDE
IDE
ATA
ATA
3 Gb/
3 Gb/
SATA2.0
SATA2.0
(GigabitRTL 8211B )
(GigabitRTL 8211B )
IDE
SATA II
LAN
52
GF7025-M2
Ver 5.x
Codec
I/O
Ver 6.x
ALC888
ALC662
7.1
5.1
PCI
x2
PCI
x2
x1
x1
PCI Express x 1
x1
PCI Express x 1
x1
x1
x1
x1
x1
IDE
x1
IDE
x1
SATA
x4
SATA
x4
x1
x1
x1
x1
CD
x1
CD
x1
S/PDIF
x1
S/PDIF
x1
CPU
x1
CPU
x1
x1
x1
CMOS
x1
CMOS
x1
USB
x3
USB
x3
x1
x1
(24)
x1
(24)
x1
(4)
x1
(4)
x1
PS/2
x1
PS/2
x1
PS/2
x1
PS/2
x1
VGA
x1
VGA
x1
DVI-D
x1
DVI-D
x1
LAN
x1
LAN
x1
USB
x4
USB
x4
x6
x3
208 mm () X 244 mm ()
208 mm () X 244 mm ()
RAID 0 / 1 / 5 / 0+1
RAID 0 / 1 / 5 / 0+1
OS BiostarOS BiostarOS
2007/06/01
53
GF7025-M2
BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the Phoenix-Award
BIOS Setup program on this motherboard. The Setup program allows users to
modify the basic system configuration and save these settings to CMOS RAM.
The power of CMOS RAM is supplied by a battery so that it retains the Setup
information when the power is turned off.
Basic Input-Output System (BIOS) determines what a computer can do without
accessing programs from a disk. This system controls most of the input and
output devices such as keyboard, mouse, serial ports and disk drives. BIOS
activates at the first stage of the booting process, loading and executing the
operating system. Some additional features, such as virus and password
protection or chipset fine-tuning options are also included in BIOS.
The rest of this manual will to guide you through the options and settings in
BIOS Setup.
APM Support
This PHOENIX-AWARD BIOS supports Version 1.1&1.2 of the Advanced
Power Management (APM) specification. Power management features are
implemented via the System Management Interrupt (SMI). Sleep and Suspend
power management modes are supported. Power to the hard disk drives and
video monitors can also be managed by this PHOENIX-AWARD BIOS.
GF7025-M2
ACPI Support
Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration
and Power interface specification (ACPI). It provides ASL code for power
management and device configuration capabilities as defined in the ACPI
specification, developed by Microsoft, Intel and Toshiba.
DRAM Support
DDR2 SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This PHOENIX-AWARD BIOS supports the AMD CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to
select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help
and press <Esc> to quit. The following table provides more detail about how to
navigate in the Setup program by using the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F7 key
F10 key
Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Main Menu Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu E xit
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the optimized defaults
Save all the CMOS changes and exit
GF7025-M2
1 Main Menu
Once you enter Phoenix-Award BIOS CMOS Setup Utility, the Main Menu
will appear on the screen. The Main Menu allows you to select from several
setup functions. Use the arrow keys to select among the items and press <Enter>
to accept and enter the sub-menu.
!! WARNING !!
GF7025-M2
Advanced BIOS Features
This submenu allows you to configure advanced features of the BIOS.
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and
Programmed Input/ Output features.
PnP/PCI Configurations
This submenu allows you to configure certain Plug and Play and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
GF7025-M2
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.
GF7025-M2
Upgrade BIOS
This submenu allows you to upgrade bios.
GF7025-M2
2 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into several categories.
Each category includes no, one or more than one setup items. Use the arrow
keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the
value you want in each item.
Figure 2: Standard CMOS Setup
Options
Description
Date
mm : dd : yy
Time
hh : mm : ss
IDE Channel 0
Master
IDE Channel 0
Slave
GF7025-M2
Item
Options
Description
360K, 5.25 in
1.2M, 5.25 in
Drive A
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
None
EGA/VGA
Video
CGA 40
CGA 80
MONO
All Errors
No Errors
Halt On
N/A
Extended Memory
N/A
Total Memory
N/A
GF7025-M2
3 Advanced BIOS Features
Figure 3: Advanced BIOS Setup
CPU Feature
GF7025-M2
Virtualization
The item allows you control the Virtualization function.
The Choices: Enabled (default), Disabled.
Virus Warning
This option allows you to choose the VIRUS Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an attempt
is made to write to the boot sector, BIOS will display a warning message on the
screen and sound an alarm beep.
Disabled (default) Virus protection is disabled.
Enabled
Virus protection is activated.
10
GF7025-M2
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled (default), Enabled.
Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
A password is required for the system to boot and is also
required to access the Setup Utility.
Setup (default):
A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.
11
GF7025-M2
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Cache Setup
12
GF7025-M2
CPU Internal Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disabled
Disable cache.
External Cache
This option enables or disables Level 2 secondary cache on the CPU, which
may improve performance.
Enabled (default) Enable cache.
Disabled
Disable cache.
13
GF7025-M2
Removable Device Priority
Select Removable Boot Device Priority.
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB
HDD1, USB HDD2, and Bootable Add-in Cards.
14
GF7025-M2
CD-ROM Boot Priority
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB CDROM0,
USB CDROM 1.
15
GF7025-M2
4 Advanced Chipset Features
This submenu allows you to configure the specific features of the chipset
installed on your system. This chipset manage bus speeds and access to system
memory resources, such as DRAM. It also coordinates communications with the
PCI bus. The default settings that came with your system have been optimized
and therefore should not be changed unless you are suspicious that the settings
have been changed incorrectly.
Figure 4: Advanced Chipset Setup
K8<->NB HT Speed
The Choices: AUTO (default), 1x, 2x, 3x, 4x, 5x.
16
GF7025-M2
K8<->NB HT Width
The Choices: AUTO (default), 88, 1616.
SSE/SSE2 instructions
This item allows you to enable/disable SSE/SSE2 instruction.
The Choices: Enabled (default), Disabled.
17
GF7025-M2
5 Integrated Peripherals
Figure 5. Integrated Peripherals
18
GF7025-M2
MCP Storage Config
19
GF7025-M2
Primary Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard
drives in your system. As well, your operating environment requires a DMA
driver (Windows 95 or OSR2may need a third party IDE bus master driver). If
your hard drive and your system software both support Ultra DMA, select Auto
to enable BIOS support.
The Choices: Auto (default), Disabled.
Serial-AT A Controller
This item allows you to enable or disable the Serial ATA function.
The Choices: Enabled (default), Disabled.
20
GF7025-M2
Onboard Device
Highlight the Press Enter label next to the Onboard Device label and press
the enter key will take you a submenu with the following options:
HD Audio
This option allows you to control the onboard HD audio.
The Choices: Auto (default), Disabled.
MAC LAN
This option allows you to control the onboard LAN.
The Choices: Auto (default), Disabled.
21
GF7025-M2
Onboard SuperIO Device
Press Enter to configure the Super I/O device.
22
GF7025-M2
Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP.
The Choices:
SPP (default)
EPP
ECP
ECP+EPP
Onboard GPU
This item allows you to control the onboard GPU.
The Choices: Auto (default), Always Enable.
OnChip USB
This option should be enabled if your system has a USB installed on the system
board. You may need to disable this feature if you add a higher performance
controller.
The Choices: V1.1+V2.0 (default), Disabled, V1.1
23
GF7025-M2
USB Keyboard/Storage Support
This item allows you to enable or disable the USB Keyboard / storage Legacy
Support.
Enabled (default)
Disabled
Disabled
HDMI Audio
This item allows you to control the audio function of HDMI.
The Choices: Auto (default), Disabled.
24
GF7025-M2
6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to
utilize energy conservation and power up/power down features.
Figure 6. Power Management Setup
ACPI Function
This item displays the status of the Advanced Configuration and Power
Management (ACPI).
The Choices: Enabled (default), Disabled.
25
GF7025-M2
Power Management
This category allows you to select the power saving method and is directly
related to the following modes:
1. HDD Power Down.
2. Suspend Mode.
There are three options of Power Management, three of which have fixed mode
settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Power Saving
Maximum power management only available for sl CPUs.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Define (default)
Allow you to set each option individually.
When you choose user define, you can adjust each of the item from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min. to 15 min.
26
GF7025-M2
HDD Down In Suspend
This option allows you to enabled or disabled the HDD power down function in
suspend mode.
The Choices: Disabled (default), Enabled
Soft-Off by PBTN
This item determines the behavior of system power button. Instant off turn off
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices: Delay 4 Sec, Instant-Off (default).
Power-On by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time to boot up the system.
The Choices: Disabled (default), Enabled.
27
GF7025-M2
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose the system boot up time, input hour, minute and second to
specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
HPET Support
This option allows you to disabled or enables the High Precision Event Timer.
The Choices: Enabled (default), Disabled.
POWER ON Function`
This item allows you to choose the power on method.
The Choices: Button Only(default), Password, Hot Key, Mouse Move, Mouse
Click, Any Key, Keyboard 98.
KB Power ON Password
Input password and press Enter to set the Keyboard power on password.
28
GF7025-M2
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to
the default settings.
29
GF7025-M2
The above settings will be shown on the screen only if Manual is chosen for
the resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus
and provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and
peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing Auto(ESCD) (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral. By Choosing Manual, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
The Choices: Auto (ESCD) (default), Manual.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending
on the type of device using the interrupt. When you press the Press Enter tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when Resources Controlled By is set to
Manual.
IRQ-5
assigned to PCI Device
IRQ-7
assigned to PCI Device
IRQ-9
assigned to PCI Device
IRQ-10
assigned to PCI Device
IRQ-11
assigned to PCI Device
IRQ-14
assigned to PCI Device
30
GF7025-M2
8 PC Health Status
Figure 8: PC Health Status
31
GF7025-M2
CPU Smart Fan
Choose this item and then the BIOS will auto test and detect the CPU fan
functions and show CPU fan speed.
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is
only effective under Windows 98 ACPI mode.
The Choices: Disabled , 60/ 140, 65/ 149, 70/ 158, 75/ 167,
80/ 176(default), 85/ 185, 90/ 167.
32
GF7025-M2
CPU Vcore, Chipset Volt, +3.3V, +5.0V, +12.0V, DDR Voltage,
HT Voltage, Voltage Battery
Detect the systems voltage status automatically.
CPU Temp
This field displays the current temperature of CPU.
33
GF7025-M2
9 Performance Booster Zone
VCore Voltage
This item allows you to adjust the CPU Vcore voltage.
The Choices: Default (default), +3.3%, +6.6%, +10%
Memory Voltage
This item allows you to adjust the memory voltage.
The Choices: Default (default), 2.000V, 2.045V, 2.100V
CPU Frequency
This item allows you to select the CPU Frequency.
The Choices: 200 (default); Min=200, Max=450, Key in a DEC number.
34
GF7025-M2
DRAM Configuration
Timing Mode
This item allows you to choose to manually or automatically regulate the DDR
Timing.
The Choices: Auto (default), MaxMemClk.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
35
GF7025-M2
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
PCIE Clock
This item allows you to select the PCIE clock.
The Choices: 100Mhz (default), 101Mhz~150Mhz.
36