Professional Documents
Culture Documents
SOLENOID VALVES
TABLE OF CONTENTS
INTRODUCTION
10
SOLENOID VALVES
INTRODUCTION
DOROT CONTROL VALVES is proud to present the new catalogue of its solenoid
operators.
In this catalogue, users will find technical specifications of the new solenoid
operators, designed by DOROT for highest performance in irrigation systems.
This catalogue is aimed to:
Present the benefits of the DOROT new solenoid operators and solenoid
valves.
Supply the required technical data for selecting the adequate solenoid operator
or solenoid valve.
Guiding the user in the precise ordering procedure
The catalogue contains information regarding the new DOROT solenoid operators,
solenoid base and solenoid valve.
SOLENOID VALVES
Applications
On / Off activation of irrigation valves.
Remote control of pressure and flow regulating valves.
Benefits
Low sensitivity to dirt.
Exceptional hydraulic performance (up to 10 bar with 2.4mm orifice)
Low sensitivity to voltage fluctuations.
High quality materials for maximum mechanical durability.
High reliability and low maintenance.
Compatible with most continuous current controllers available.
SOLENOID VALVES
TECHNICAL DATA
Operator type
Wires color
Operator mark
Operator type
2w 24 VAC
Red
S80-2
24VAC N.C
2w N.C. 24 VAC
S80-2
Black
TECHNICAL
DATA
24VDC N.C
2w N.C. 24 VDC
S80-2
2w 12 VDC
Blue
12VDC N.C
Wires color
Operator mark
2w N.C. 12 VDC
Operator type
2w 24 VDC
Frequency
Inrush
50 Hz
0.25
0.11
60 Hz
0.22
0.095
0.12
0.12
YDD00003024D00Y
0.28
YDD00003012D00Y
0.28
Current (Amp)
Inrush
Holding
0.25
0.11
0.22
0.095
S80-2
24VAC N.C
S80-2
24VDC N.C
S80-2
12VDC N.C
10%
Red
Voltage:
Black
2w N.C. 24 VAC
Cat. No.
Holding
50Hz
60Hz
2w N.C. 24 VDC
0.12
YDD00003024A51Y
0.12
Base connection:
Voltage:
3/4 20 UNEF
male
24 V
ACthreaded
, 24 VDC, 12 VDC
Allowed
deviation
from
voltage:
10%
Manual override (optional):
knob (in the valve bonnet) or selector (turn)
Connecting wires:
2 wires, cross-section- 0.32 mm2 length -60 cm
Operating pressure range:
0-10 bar (up to 2.4mm orifice)
Base connection:
3/4" 20 UNEF male threaded
Materials:
Body
Coated Steel
Materials:
BodyNBR
Coated Steel
SealsSST
NBR
Internals
Internals
SST
Seals
Dimensions:
Dimensions:
Operator
Operator seat
Operator
Operator seat
29 mm
10 mm
/4 - 20 UNEF
20 mm
1 mm
48 mm
6.3 mm
2 mm
/4 20 UNEF
15 mm
1.5 mm to 2.4 mm
How to order
Operator specification:
S-80-2 -
1)
1) 24V or 12V
2) AC or DC
2)
SOLENOID VALVES
Applications
On / Off activation of irrigation valves.
Remote control of pressure and flow regulating valves.
Actuation by battery- powered controller.
Benefits
Low sensitivity to dirty water.
Exceptional hydraulic performance (up to 10 bar with 2.4mm orifice)
Requires very short pulse for activation.
Requires low operating voltage.
Wide range of operating voltages.
High quality materials for maximum mechanical durability.
Compatible with most pulse-signal controllers.
Applicable with solar- charged controllers.
High reliability and low maintenance.
SOLENOID VALVES
Wire color
Operator mark
Cat. No.
Red/ Black
S92-2
7.5-30 VDC
Latch
YDD00003930L00Y
Voltage:
Wire color
Connecting wires:
Operator mark
S92-2
Operating
pressure
range:
7.5-30
VDC
Red/ Black
0-10
bar (up
to 2.4mm
2w Latch
7.5-30
VDC orifice)
Assembly connection:
selector (turn)
Latch
Voltage:
7.5- 30 VDC (requires capacitor of 4700f)
15 ms
Connecting wires:
2 wires, cross-section- 0.32 mm2 length -60 cm
Maximal
pulse width:
ms bar (up to 2.4mm orifice)
Operating
pressure range: 1000-10
CoilAssembly
resistance:connection:
5.1
3/4" 20 UNEF male threaded
Manual override (optional):
selector (turn)
Minimal pulse width:
15 ms
Maximal pulse width:
100 ms
Materials:
Coil resistance:
5.1
Minimal pulse width:
Body
Coated Steel
Seals
NBR
Materials:
Body
Internals
SST
Seals
Internals
Coated Steel
NBR
SST
Dimensions:
Dimensions:
Operator
Operator
Operator
seat
Operator
seat
29 mm
10 mm
/4 - 20 UNEF
20 mm
48 mm
1 mm
6.3 mm
2 mm
15 mm
/4 20 UNEF
1.5 mm to 2.4 mm
How to order
Operator specification:
S-92-2-9VDC
7
VALVE BASE
SOLENOID VALVES
The base of DOROT solenoid valve enables the addition of 2-way and 3-way solenoid
valves in various control circuits. The base is designed to allow maximal through flow
and to withstand rough environmental conditions.
Stainless
steel bracket,
installation
on the
hydraulic
valve
The
DOROT solenoid
valve base for
enables
2-way or 3-way
solenoid
valves be
addedor on solenoids
to manifold,
various controliscircuits.
The
base
is
designed
to
allow
maximal
through
flow
and
to
supplied on request.
withstand rough environmental conditions.
Stainless steel bracket, for installation on the hydraulic valve or on solenoids manifold, is
supplied on request.
Solenoid Seat
C
Manual
Override
Bracket
(Optional)
Materials:
Body
Glass Reinforced Polyamide
Materials:
Seals
Rubber
Body
Glass Reinforced Polyamide
Override
Polybutylene
Seals
Rubber
BracketPolybutyleneSST
Override
Bracket
SST
Connections:
Port connections:
1/8" BSP F
Operator connection: 3/4" 20 UNEF
Connections:
Port connections
1/8" BSP F
Orifice diameter:
1.5 mm
Operator connection
3/4 20 UNEF
Orifice diameter
1.5 mm
Cat. No:
Base:
775437200D
SOLENOID VALVES
DOROT
DOROT
SOLENOID
SOLENOID
DOROT SOLENOID VALVE BASE
VALVE
VALVE
BASE
BASE
DOROT
SOLENOID
VALVE BASE
Dimensions:
Dimensions:
Dimensions:
Dimensions:
Side view
Side view
Side view
Top view
Top view
Side
view
42 mm
44 mm
Top
view
20 mm
Top view
Water passages
WaterWater
passages
passages
Water passages
2 mm 2 mm
2 mm
28 mm
1.5 mm
1/8 BSP
10 mm
Manual
Manual
override
override
operating:
operating:
Manual
override operating:
Manual override operating:
Automatic
Automatic
operation
operation
Manually
Manually
open open
Automatic operation
Manually open
Automatic operation
Manually open
Base connections:
Base connections:
Port Port C
C
1
1
2
2
Base connections:
2-way2-way
In In
Out Out
3-way3-way
N.C N.C Port
Command
Command
pressure
Vent Vent
C pressure
1
2
3-way3-way
N.O
N.O
Command
Command
Vent
Vent
pressure
pressure
2-way
In
Out
3-way N.C
3-way N.O
Command
Command
Dorot
Dorot
control
control
valves
valves
Dorot control valves
pressure
Vent
Vent
pressure
9
9
SOLENOID VALVES
Applications
On / Off activation of irrigation valves.
Electric remote control of hydraulic and pneumatic systems.
Electric activation of flow and pressure regulation systems.
Benefits
Low power consumption.
Low sensitivity to dirty water.
Exceptional hydraulic performance.
Low sensitivity to voltage fluctuations.
High quality materials for maximum durability.
High reliability and low maintenance.
Compatible with most controllers.
High flow rate, causing fast valve reaction.
S80-3 offers exceptional resistance to lightning related voltage spikes.
Base connections:
Port
3-way N.C
Command
pressure
Vent
3-way N.O
Command
Vent
pressure
C
1
10
SOLENOID VALVES
3/2 CONTINUOUS
CURRENT
3/2 CONTINUOUS
CURRENT SOLENOID
VALVE
SOLENOID
VALVE
TECHNICAL DATA
TECHNICAL DATA
Operator type Wires color Operator mark Frequency
3w N.O. 24 VAC
Red / Brown
Wires color
3w N.C. 24 VAC
Red / Blue
Red/ Brown
3w N.O. 24 VDC
BlackBlue
Red/
3w N.O. 12 VDC
Black
Blue
Blue
Voltage:
Current (Amp)
Holding
Inrush
Cat. No.
Solenoid Valve
(base+operator)
0.15
0.15
775720243A
YDDD0002024A50Y
Current (Amp)
60
Hz
0.14
0.14
Operator mark
Operator type
Holding
50 Hz
0.17
0.17 Inrush
S80-3-D
YDDD0004024A50Y
50Hz
0.15 77572C243A
0.15
S80-3-D
24VAC
N.C.
VAC
60 Hz3w N.O. 240.16
0.16
S80-3-D
24VAC N.O.
50 Hz
24VAC N.O.
S80-3
S80-3-D
3w N.C. 240.12
VAC
24VDC
N.O.N.C.
24VAC
S80-3
S80-3
3w N.O. 240.28
VDC
24VDC
12VDC
N.O.N.O.
S80-3
3w N.O. 12 VDC
12VDC N.O.
24 VAC, 24 VDC, 12 VDC
60Hz
50Hz 0.12
60Hz
0.14
0.17
0.16
0.14
0.17
775720243D
0.16
YDD00002024D00Y
0.28
0.12
0.12
775720123D
YDD00002012D00Y
0.28
0.28
10%
Connecting wires:
Voltage:
Operating pressure range:
0-10 bar
Allowed deviation from voltage:
Assembly connection:
3/4 20 UNEF
Connecting wires:
Manual override:
knob
Operating pressure range:
Orifice diameter:
1.5 mm
Assembly connection:
Manual override:
Materials:
Seals
Internals
Base
knob
Dimensions:
Materials:
Coated
Steel
Body
NBR
Coated Steel
Seals
NBR
SST
Internals
SST
Glass Reinforced Polyamide
Base:
Glass Reinforced Polyamide
Dimensions:
81 mm
Body
Cat. No.
Solenoid operator
44 mm
1/8 BSP F
Manual override
operating:
How to order
Automatic operation
Operator specification:
Operator specification:
Manually open
S-80-3-D-
1)
-AC-
2)
3)
1) 24V or 12V
2) 50Hz or 60Hz
3) NO or NC
S-80-3 -
1)
1) 24V or 12V
- DC - NO
11