Professional Documents
Culture Documents
Ankle-Brachial Index Amc 2
Ankle-Brachial Index Amc 2
The Ankle Brachial Index (ABI) test is a popular tool for the non-invasive assessment of
peripheral vascular disease (PVD). This test is done by measuring blood pressure at the ankle
and in the arm while a person is at rest.
It is very important in patients with risk factors for
PVD like smoking, diabetes, overweight (BMI >25),
high blood pressure or high cholesterol!
Measurements are usually repeated at both sites after
5 minutes of walking on a treadmill.
The ABI can be derived by dividing the highest ankle
systolic pressure by the arm systolic blood pressure.
This measurement adds a degree of objectivity to the
detection and grading of any arterial occlusive disease
present.
As shown in the below diagram the interpretation is
outlined and on can relate the values to clinical
presentations:
Normal range
>0.95
Intermittent claudication
0.9 0.4
Rest pain
0.4 0.15
Gangrene
< 0.15
In patients with diabetes, heavy smoking or chronic renal failure their arterial walls may be
calcified and not compressible by a blood pressure cuff, resulting in falsely elevated ABI
determination!
In order to calculate the ankle-brachial index (ABI), systolic blood pressure is measured by
Doppler ultrasonography in each arm and in the dorsalis pedis (DP) and posterior tibial (PT)
arteries in each ankle. The higher of the two arm and ankle pressures is selected. The right and
left ABI values are determined by dividing the higher ankle pressure in each leg by the higher arm
pressure. A ratio greater than 1.30 suggests a noncompressible, calicified vessel; in this situation,
the true pressure at that location cannot be obtained, and additional tests are required to diagnose
peripheral arterial disease. Patients with claudication typically have ankle-brachial index values
ranging from 0.41 to 0.90, and those with critical leg ischemia have values of 0.40 or less.