Professional Documents
Culture Documents
Cara Jahit Seluar
Cara Jahit Seluar
1.
Semat dan jelujur kasar lisu-lisu tergantung di bahagian hadapan dan dan lisu
cembung di bahagian belakang slek. Jahit menggunakan mata jahitan yang
sesuai.Kemudian tekan.
2.
Sediakan dan cantumkan belah berfly di bahagian hadapan seluar.Kemudian
tekan.
3.
Sediakan dan jahit kocek sisi tersenbunyi di bahagian hadapan kiri dan kanan
slek.Kemudian tekan.
4.
Sediakan dan cantumkan kocek berbibir di bahagian belakang slek dengan
ukuran yang sesuai.Kemudian tekan.
5.
Temukan bahagian hadapan dengan bahagian belakang seluarkemudian jahit
kelim sisi kiri dan kanan slek.kemudian tekan.
6.
7.
8.
Sediakan penyokong tali pinggang dan ikatan pinggang,kemudian cantumkan
dibahagian pinggang seluar.kemudian tekan.
9.
Pin the zipper to the left fly, with the fold of the fabric just touching the left side of
the center part of the zipper. You can look at a pair of jeans as a reference if you
need to.Cut out the zipper placket. It is a rectangular piece of fabric folded in half, to
baste behind the left side of the zipper.
2. You can trim this placket to fit your pattern, if needed. Baste the placket behind
the zipper on the left side of the pants.
3. After you baste through the left side of the pants, the zipper and the placket, you
can remove the pins. Using a zipper foot on your sewing machine, sew through all
the layers about 1/8" from the edge of the left pants, near the zipper.
4. Putting the regular sewing foot back on the machine, turn the pants over and add
an additional stitch to just the zipper and placket, not stitching the pants front to it.
This will help reinforce the zipper