Professional Documents
Culture Documents
Ogden Lead Test
Ogden Lead Test
Dan Juneau
Carnow, Conibear & Associates
600 W Van Buren Street Suite 500
Chicago, IL 60607
All data for the associated quality control (QC) met EPA, method, or internal laboratory specifications except
where noted in the case narrative. If you are comparing these results to external QC specifications or compliance
limits and have any questions, please contact us.
This final report of laboratory analysis consists of this cover letter, case narrative, analytical report, dates report,
and any accompanying documentation including, but not limited to, chain of custody records, raw data, and
letters of explanation or reliance. This report may not be reproduced, except in full, without the prior written
approval of Suburban Laboratories, Inc.
If you have any questions regarding these test results, please call me at (708) 544-3260.
Sincerely,
Pat Rodriguez
Customer Service Manager
708-544-3260 ext. 214
pat@suburbanlabs.com
Illinois Department of Public Health #17585
Page 1 of 10
Case Narrative
Client: CARNOW
PO:
QC Level:
WorkOrder: 1605A41
Temperature of samples upon receipt at lab: 23 C
Chain of Custody: EV
General Comments:
- All results reported in wet weight unless otherwise indicated. (dry = Dry Weight)
- Sample results relate only to the analytes of interest tested and to sample as received by the laboratory.
- Environmental compliance sample results meet the requirements of 35 IAC Part 186 unless otherwise indicated.
- Waste water analysis follows the rules set forth in 40 CFR part 136 except where otherwise noted.
- Accreditation by the State of Illinois is not an endorsement or a guarantee of the validity of data generated.
- For more information about the laboratories' scope of accreditation, please contact us at (708) 544-3260 or the Agency at
(217) 782-6455.
- All water analyses that are required to be performed in the field (e.g., pH, residual chlorine, sulfite, temperature, etc.) but are
analyzed in the lab are identified as "in lab" and are considered past holding time. Following industry practices these results do
not contain an "H" flag but are qualified as being analyzed in the lab.
- All radiological results are reported to the 95% confidence level.
Abbreviations:
- Reporting Limit: The concentration at which an analyte can be routinely detected on a day to day basis, and which also meets
regulatory and client needs.
- Quantitation Limit: The lowest concentration at which results can be accurately quantitated.
- J: The analyte was positively identified above our Method Detection Limit and is considered detectable and usable; however,
the associated numerical value is the approximate concentration of the analyte in the sample.
- ATC: Automatic Temperature Correction.
- TNTC: Too Numerous To Count
- TIC: Tentatively Identified Compound (GCMS library search identification, concentration estimated to nearest internal
standard).
- SS (Surrogate Standard): Quality control compound added to the sample by the lab.
Method References:
For a complete list of method references please contact us.
- E: USEPA Reference methods
- SW: USEPA, Test Methods for Evaluating Solid Waste (SW-846)
- M: Standard Methods for the Examination of Water and Wastewater
- USP: Latest version of United States Pharmacopeia
Workorder Specific Comments:
Page 2 of 10
Laboratory Results
Workorder: 1605A41
Parameter
Result
METALS by ICPMS
Lead
MCL
Report
Limit
Qual
15.0
Analyst: jmk
5.00
g/L
Parameter
Lead
MCL
Report
Limit
Qual
Lead
15.0
5.00
g/L
METALS by ICPMS
Lead
5/14/2016 2:17 AM
36264
MCL
Report
Limit
Qual
Units
15.0
Analyst: jmk
5.00
g/L
Parameter
ND
Units
Result
METALS by ICPMS
36264
Analyst: jmk
Parameter
5/14/2016 2:14 AM
ND
Result
METALS by ICPMS
ND
Units
5/14/2016 2:20 AM
36264
Result
MCL
Report
Limit
Qual
Units
ND
15.0
Analyst: jmk
5.00
g/L
Page 3 of 10
5/14/2016 2:23 AM
36264
Laboratory Results
Workorder: 1605A41
Parameter
Result
MCL
Report
Limit
Qual
Lead
ND
15.0
Analyst: jmk
5.00
g/L
Result
Lead
ND
MCL
Report
Limit
Qual
15.0
5.00
Result
g/L
5/14/2016 2:40 AM
36264
MCL
Report
Limit
Qual
Units
METALS by ICPMS
Lead
ND
15.0
Analyst: jmk
5.00
g/L
Lead
Units
Parameter
METALS by ICPMS
36264
Analyst: jmk
Parameter
5/14/2016 2:25 AM
METALS by ICPMS
Parameter
METALS by ICPMS
Units
5/14/2016 2:42 AM
36264
Result
MCL
Report
Limit
Qual
Units
ND
15.0
Analyst: jmk
5.00
g/L
Page 4 of 10
5/14/2016 2:45 AM
36264
Laboratory Results
Workorder: 1605A41
Parameter
Result
METALS by ICPMS
Lead
MCL
Report
Limit
Qual
15.0
Analyst: jmk
5.00
g/L
Parameter
Lead
MCL
Report
Limit
Qual
Lead
15.0
5.00
g/L
METALS by ICPMS
Lead
5/14/2016 3:16 AM
36264
MCL
Report
Limit
Qual
Units
15.0
Analyst: jmk
5.00
g/L
Parameter
ND
Units
Result
METALS by ICPMS
36264
Analyst: jmk
Parameter
5/14/2016 2:59 AM
ND
Result
METALS by ICPMS
ND
Units
5/14/2016 3:19 AM
36264
Result
MCL
Report
Limit
Qual
Units
ND
15.0
Analyst: jmk
5.00
g/L
Page 5 of 10
5/14/2016 3:22 AM
36264
Laboratory Results
Workorder: 1605A41
Parameter
Result
METALS by ICPMS
Lead
MCL
Report
Limit
Qual
15.0
Analyst: jmk
5.00
g/L
Parameter
METALS by ICPMS
Lead
ND
Units
5/14/2016 3:25 AM
36264
Result
MCL
Report
Limit
Qual
Units
ND
15.0
Analyst: jmk
5.00
g/L
Page 6 of 10
5/14/2016 3:28 AM
36265
Prep Dates
Client: Carnow, Conibear & Associates
Sample ID
Client Sample ID
Collection Date
1605A41-001A
51171-1-K-CS-01
5/10/2016 5:56 AM
1605A41-002A
51171-1-NE-WC-02
5/10/2016 5:59 AM
1605A41-003A
51171-1-NE-WC-03
51171-1-NE-WC-04
5/10/2016 6:03 AM
1605A41-005A
51171-1-NE-WC-05
5/10/2016 6:06 AM
51171-1-NE-WC-06
51171-1-C-WC-07
5/10/2016 6:10 AM
1605A41-008A
51171-1-N-NW-WC-08
5/10/2016 6:12 AM
1605A41-009A
51171-1-NW-WC-09
5/10/2016 6:14 AM
1605A41-010A
51171-2-NW-WC-10
5/10/2016 6:16 AM
1605A41-011A
51171-2-NE-WC-11
5/10/2016 6:18 AM
1605A41-012A
51171-3-NW12
5/10/2016 6:21 AM
1605A41-014A
51171-3-NW-WC-13
51171-4-NE-WC-14
Leachate Date
Prep Date
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:20 PM
5/13/2016 2:22 PM
5/10/2016 6:08 AM
1605A41-007A
1605A41-013A
Prep Batch
5/10/2016 6:01 AM
1605A41-004A
1605A41-006A
Workorder: 1605A41
5/10/2016 6:24 AM
5/10/2016 6:28 AM
Page 7 of 10
Qualifier Definitions
Qualifiers:
*
B
c
C
E
G
H
J
N
ND
P
R
S
W
Page 8 of 10
Page 9 of 10
Page 10 of 10