Professional Documents
Culture Documents
Assignment 7
Assignment 7
Published:
Return to:
Figure 1
2. DC-DC converters
In a step down converter, consider all components to be ideal.
a) Sketch the step down converter
b) Sketch the waveform for the continuous-conduction mode of the inductor current and
voltage.
c) Which is the condition for discontinuous mode converter operation?
d) Let vO= VO be held constant at 5 V by controlling the switch duty ratio D. Calculate the
minimum L required to keep the converter operation in a continuous-conduction mode
under all conditions if Vd is 10-40 V, Po5W and fs=50kHz.
In a step up converter, consider all components to be ideal.
a) Sketch the step down converter
b) Sketch the waveform for the continuous-conduction mode of the inductor current and
voltage.
c) Which is the condition for discontinuous mode converter operation?
05/07/15
STE 6217
Side 1 av 1