Professional Documents
Culture Documents
Labo 5 Data Sheet Heat Exchanger
Labo 5 Data Sheet Heat Exchanger
Labo 5 Data Sheet Heat Exchanger
Supply as much information as possible and attach applicable specifications. Questions? Please do not hesitate to contact us.
API 660
C
2. Performance of Unit
API 618
R
Other
____________________________
Shell Side
Tube Side
Fluid Name*
Propano_________________________
106360.06 (kg/h)________________ _
Vapor
18295.2(GPM)___________________
Liquid
Water Vapor**
18295.2(GPM)____________________
3498.6 (LPM)____________________
82.22/35 (C)____________________
14.62 bar________________________
________________________________
0 bar____________________________
________________________________
-232098927.4 (BTU/h)____________
Agua_________________________
1613574.04
(kg/h)______________
7135.3
(GPM)__________________
7135.3
(GPM)__________________
26919.4 (LPM)________________
27.8/34.44
(C)_________________
2.75 bar____________________
_____________________________
0.1 bar_____________________
_____________________________
3. Design Requirements
Design/Test Pressure (psia)(bara)(kg/cm2) ________________________________
(F)(C)
Design Maximum Temperature
________________________________
(F)(C)
Design Minimum Temperature
________________________________
________________________________
Corrosion Allowance (in)(mm)
4. Materials of Construction
Shell
Channel or Bonnet
Tubesheet
Baffle
Gasket
Tubes
Tube OD:
5/8"
Tube Thickness: 18 BWG (0.049 wall)
Tube Pitch:
Triangular
Tube Type:
Plain
130.29 bar___________________
_____________________________
_____________________________
_____________________________
________________________________
________________________________
________________________________
________________________________
________________________________
Carbon Steel______________________
3/4" X
1"
14 BWG (0.083" wall)
X 16 BWG (0.065" wall)
X Square
X LoFin
5, Other Considerations:
Maximum Overall Length:
Number of Tubes Passes:
Tube-Tubesheet Joint: Double Grooved and Expanded
Seal Welded
Strength Welded
*For gas streams with multiple components please attach a gas analysis. **For saturated gas please indicate the amount of
water vapor. If this information is unknown, supply the relative humidity and the temperature/pressure at which the gas is
saturated.
Please email or fax completed form to:
Tel: 716-826-7911