Professional Documents
Culture Documents
Ib Lab - Density of Ethanol, DCP
Ib Lab - Density of Ethanol, DCP
This data will be recorded (with correct uncertainty) and processed into a graph, which will then be
used to find the density of ethanol. This density will be compared to known literature values.
Apparatus:
10 mL graduated cylinder
Electronic balance
Ethanol
Method:
1. Find the mass of the empty cylinder.
2. Add a small amount of ethanol and measure the mass and volume.
3. Continue adding more ethanol and recording the mass and volume until you have neared the top of
the cylinder’s scale. Make sure you have a sufficient amount of data points.
4. Record all measurements in a suitable table. Be sure to show ± uncertainty at the top of each
column.
5. Make an appropriate graph and find density (w/ uncertainty) from the graph.
Theory: mass
density =
volume
.
The above information was given to the student by the instructor. What follows
immediately below is the student’s own work
Defining the Problem and Controlling the Variables: Developing a method for
selecting variables: collecting data:
Formulates a focused Designs a method for the Develops a method that
problem/research question effective control of the allows for the collection of
c=2
and identifies the relevant variables. sufficient relevant data.
variables.
Design (D)