Plasma Speaker Circuit

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Plasma speaker circuit

You can use a 7812 12 volt regulator to obtain


12 volts DC from the 24 volt DC power supply.

Flyback
transformer

+12V

Pin 1
Pin 3

3k
0.01F
7

High Voltage

+24V

Pin 6

3
100 watts

HV return

1
3

2k
6
2

IRF640
Requires heat sink

NE555
5
1

Audio in
1.0F

0.01F

MSH1AAS92A
Flyback transformer pinout
Pin 6

0.01F

Pin 3

Pin 1
Note: the flyback transformer also contains internal
diodes, so the pins can not be interchanged.

Most components can be found at Jameco, Digikey, Mouser or other electronics distributors

Flyback transformer is Goldmine Electronics Item number G17744


http://www.goldmine-elec-products.com/prodinfo.asp?number=G17744
24 volt, 6 amp power supplies are available from Circuit Specialists and All Electronics
http://www.circuitspecialists.com/enclosed-switching-power-supplies
http://www.allelectronics.com/make-a-store/category/480/Power-Supplies/1.html
100 watt 3 ohm resistors can be found on ebay

Circuit is based on http://www.youtube.com/watch?v=xv_MS9nBZyw

You might also like