The document provides instructions and code snippets to optimize hardware performance, media quality, and user interface smoothness on an Android device through modifications to the build.prop file. It includes tweaks for rendering using the GPU, increasing transparency and scrolling smoothness, improving media encoding and decoding quality, making the UI more liquid smooth, disabling noise cancellation, unlocking FPS limits, and various Qualcomm and other device-specific optimizations. Requirements are a rooted Android 2.3+ device and editing the build.prop file in the system partition.
The document provides instructions and code snippets to optimize hardware performance, media quality, and user interface smoothness on an Android device through modifications to the build.prop file. It includes tweaks for rendering using the GPU, increasing transparency and scrolling smoothness, improving media encoding and decoding quality, making the UI more liquid smooth, disabling noise cancellation, unlocking FPS limits, and various Qualcomm and other device-specific optimizations. Requirements are a rooted Android 2.3+ device and editing the build.prop file in the system partition.
The document provides instructions and code snippets to optimize hardware performance, media quality, and user interface smoothness on an Android device through modifications to the build.prop file. It includes tweaks for rendering using the GPU, increasing transparency and scrolling smoothness, improving media encoding and decoding quality, making the UI more liquid smooth, disabling noise cancellation, unlocking FPS limits, and various Qualcomm and other device-specific optimizations. Requirements are a rooted Android 2.3+ device and editing the build.prop file in the system partition.
Requirements: A Rooted android device running Android 2.3 or above Installation:
Method- I 1. Open "Root Explorer" and click the R/W 2. Go to /system/build.prop 3. Backup yout current build.prop 4. Long-press on Build.Prop and you ll see a pop up 5. Text Editor 6. Type in those few line of words below into the last lin e of the text then save 7. reboot and enjoy Method- II 1. Open "Root Explorer" a nd click R/W 2. Go to /system and copy build.prop to your sd card 3. Copy build. prop to your pc 4. Move build.prop again to /system and change permission Tweaks: Render using GPU and GPU Tweaks: Code: #enable harware egl profile debug.egl.pro filer=1 #16BIT transparency , Smother Scrolling persist.sys.use_16bpp_alpha=1 #d ebug.composition.type=gpu debug.composition.type=c2d debug.performance.tuning=1 debug.enabletr=true debug.qctwa.preservebuf=1 dev.pm.dyn_samplingrate=1 video.ac celerate.hw=1 ro.vold.umsdirtyratio=20 debug.overlayui.enable=1 debug.egl.hw=1 r o.fb.mode=1 hw3d.force=1 persist.sys.composition.type=c2d persist.sys.ui.hw=1 ro .sf.compbypass.enable=0 #Enable tile rendering debug.enabletr=true persist.sys.c omposition.type=gpu #3d performance persist.android.strictmode=0 ro.min_pointer_ dur=1 ro.secure=0
Media Quality: Code: ro.media.enc.jpeg.quality=100 ro.media.dec.jpeg.memcap=8000
000 ro.media.enc.hprof.vid.bps=8000000 ro.media.dec.aud.wma.enabled=1 ro.media.d ec.vid.wmv.enabled=1 ro.media.cam.preview.fps=0 ro.media.codec_priority_for_thum b=so Liquid Smooth Ui: Code: persist.service.lgospd.enable=0 persist.service.pcs ync.enable=0 Noise Cancellation: Code: #Noise Cancellation Off htc.audio.alt.ena ble=0 htc.audio.hac.enable=0 Sensor Sleep: Code: # For sensor sleep control ro.r il.sensor.sleep.control=1 Unlock fps limit: Code: debug.egl.swapinterval=0 Qualc omm tweaks: Code: com.qc.hardware=1 debug.qc.hardware=true debug.qctwa.preserveb uf=1 debug.qctwa.statusbar=1 Screen Glitches fix: Code: debug.gr.numframebuffers =3 Disable debugging notify icon on statusbar: Code: persist.adb.notify=0 EHRPD Support : Code: ro.config.ehrpd=true Disable boot animation for faster boot : Co de:
debug.sf.nobootanimation=1 3G network for speeding up : Code: ro.ril.set.mtu1472
dalvik.gc.type=precise dalvik.vm.dexopt-data-only=1 #Enables register map for tr
acking objects to garbage collect. Might give a litt le more RAM at the cost of a few CPU cycles. dalvik.vm.dexopt-flags=m=v,o=y dalvik.vm.jniopts=forcecopy dal vik.vm.lockprof.threshold=500 dalvik.vm.stack-trace-file=/data/anr/traces.txt da lvik.vm.verify-bytecode=false # persist.sys.shutdown.mode=hibernate ro.config.hw _quickpoweron=true