Professional Documents
Culture Documents
Air Pump Does Not Operate
Air Pump Does Not Operate
Air Pump Does Not Operate
20 - Startup Mode
21 Push ON Button & set Heat Level Burn Drive Motor cycles 3 times
22 #1 LED on 23, 24, 25, Feeder Wheel begins feeding Fuel
23 Number of LED's show Set Heat Level
24 Burn Drive cycles three (3) times
25 Feed Wheel Begins Feeding Fuel
26 After 1½ minutes, Air pump comes ON 26 Time delay of 1½ minutes to Air Pump turn on
27 After 15 seconds, the Igniters turn ON
28 Within 5 minutes, Smoke and than Flame
29 Igniters turn OFF after Flame is established
NO
30 After 15 seconds the Air Pump goes OFF Air Pumps Runs Unplug Air Pump
31 Stove Ramps to Heat Level 4 from Mother Board
32 After 20 minute Startup Period, stove ramps
up or down to User Set Heat Level
Run Stove Replace the Mother Board Replace the Air Pump
as per kit instructions as per Kit instructions