Professional Documents
Culture Documents
AME1118 - Dynamics of Machinery, 02!01!2014 - Jan 2014
AME1118 - Dynamics of Machinery, 02!01!2014 - Jan 2014
Reg. No. :
Max. Marks : 60
2 Marks
2 Marks
2 Marks
2 Marks
2.
4 Marks
7 Marks
3.
Three rotating masses mA= 14kg, mB=11kg and mC=20kg are attached to a shaft with their CG
at 55mm, 80mm and 30mm respectively from the shaft axis. The angular position of B and C
from A respectively is 600 and 1300 measured in the same direction. Determine the magnitude
and angular position with respect to A of two balancing masses each with its CG at 15mm
from the shaft axis to be attached mid way between A and B and between B and C.
11 Marks
4.
5 Marks
6 Marks
5.
a) Derive an expression for natural frequency for free transverse vibrations for a shaft
subjected to three point loads and UDL using Dunkerleys method. Use sample
support.
4 Marks
1.
Page 1 of 2
2 Marks
2 Marks
2 Marks
2 Marks
Reg. No. :
b) A shaft 55mm diameter and 2.5m long is simply supported at ends and carries 3 loads
1500N, 900N and 500N at 1m, 1.5m and 2m from left end. E=200GN/m2. Find natural
frequency.
7 Marks
6.
a) Derive an expression for transmissibility ratio for spring mass damper system.
b) An engine of 560N is mounted on isolators of stiffness 1kN/mm and a damping factor of
0.25, The piston of the engine weighing 30N has a stroke of 80mm. The engine runs at
3000rpm. Determine the force transmitted to the foundation.
5 Marks
6 Marks
7.
2 Marks
9 Marks
8.
a) Describe with the help of neat sketches the principles of operation of an internal expanding
shoe brake.
b) Derive an expression for braking torque for internal expanding shoe brake.
5 Marks
* * *
Page 2 of 2
6 Marks