Professional Documents
Culture Documents
GT Table
GT Table
GT Table
GTTABLE
User Manual
Rev U
- ii -
NOTICES
GTSTRUDL User Reference Manual, GTTABLE, Revision U is applicable to Version 30 of
GTSTRUDL released April 2009 and subsequent versions.
GTSTRUDL computer program is proprietary to and a trade secret of the Georgia Tech Research
Corporation, Atlanta, Georgia 30332.
GTSTRUDL is a registered service mark of the Georgia Tech Research Corporation, Atlanta,
Georgia, U.S.A.
DISCLAIMER
NEITHER GEORGIA TECH RESEARCH CORPORATION NOR GEORGIA INSTITUTE OF
TECHNOLOGY MAKE ANY WARRANTY EXPRESSED OR IMPLIED AS TO THE
DOCUMENTATION, FUNCTION, OR PERFORMANCE OF THE PROGRAM DESCRIBED
HEREIN AND THE USERS OF THE PROGRAM ARE EXPECTED TO MAKE THE FINAL
EVALUATION AS TO THE USEFULNESS OF THE PROGRAM IN THEIR OWN ENVIRONMENT.
Commercial Software Rights Legend
Any use, duplication, or disclosure of this software by or for the U.S. Government shall be restricted
to the terms of a license agreement in accordance with the clause at DFARS 227.7202-3 (June
2005).
This material may be reproduced by or for the U.S. Government pursuant to the copyright
license under the clause at DFARS 252-227-7013, September 1989.
Georgia Tech Research Corporation
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
Copyright 2009
Georgia Tech Research Corporation
Atlanta, Georgia 30332
ALL RIGHTS RESERVED
Printed in United States of America
- iii -
Rev U
Rev U
- iv -
Date
Released
4/2009
Description
GTSTRUDL User Reference Manual, GTTABLE, has been
updated and is applicable to Version 30 of GTSTRUDL and
subsequent versions.
.
-v-
Rev U
Rev U
- vi -
Table of Contents
Section
Page
NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
DISCLAIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
GTSTRUDL User Reference Manual Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
1.0
1.1
1.2
GTTABLE Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
GTTABLE Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.0
INITIATE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1
3.2
4.1
4.2
MODIFY Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MODIFY ITEMS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.1
5.2
5.3
ORDER Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ORDER BY Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ARRANGE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.1
6.2
TRANSFER Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
TRANSFER ITEMS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7.1
7.2
7.3
DELETE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DELETE HEADINGS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DELETE ITEMS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.1
8.2
8.3
8.4
8.5
OUTPUT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PRINT HEADINGS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PRINT ITEMS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PRINT ITEM NAMES Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PRINT ORDERINGS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
- vii -
Rev U
Section
Page
9.0
UNITS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
10.0
LIST Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
11.0
CHANGE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
12.1
12.2
12.3
12.4
12.5
12.6
12.7
EXAMPLE 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EXAMPLE 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EXAMPLE 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
EXAMPLE 4.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
EXAMPLE 4.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
EXAMPLE 5.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
EXAMPLE 5.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
List of Figures
Figure 1.1-1
Figure 1.1-2
List of Tables
Table 12.2-1
Table 12.3-1
Rev U
- viii -
GTTABLE
1.0
GTTABLE Subsystem
1.1
Introduction
GTTABLE Commands
GTTABLE is a subsystem which provides the user with a convenient language for
storing and retrieving tabular data. These data are then available for use by other
subsystems, GTSTRUDL for example. Originally implemented as a stand-alone subsystem,
GTTABLE, is now an integrated part of GTSTRUDL. The purpose of this Manual is to
familiarize the user with how to create and modify tables.
Tables created by GTTABLE are structured as shown in Figures 1.1-1 and 1.1-2.
These tables are two-dimensional arrays with an arbitrary number of columns and rows
containing data. Each row represents a unique item within a given table, while each column
represents a unique heading for data in the table. The names of items and headings may be
up to eight characters long.
GTTABLE provides for two data sets in which tables may be stored; one a user data
set, and the second a subsystem (GTSTRUDL) data set. Both data sets allow the user to
protect data in a table by specifying a unique password for each table. Data in any table are
always available for output, even when the table is password protected.
Besides the simple inputting and outputting of the tabular data, the information
within the table also can be ordered. The items in a table can be ordered by increasing or
decreasing value of a particular heading. Such orderings may then be used to arrange other
headings in the table. The orderings and arrangements created by GTTABLE may be used
by other subsystems to aid searches through a particular table.
As the commands of GTTABLE are described, the examples presented will construct
the table in Figure 1.1-2. This table will be referred to by the name EXSTEEL, and it will
be placed in the user data set. At the conclusion of this report the complete sequence of
commands will be presented.
-1-
Rev U
GTTABLE Commands
GTTABLE
Figure 1.1-1
WEIGHT
(lb/ft)
AX
(in2)
DEPTH
(in)
IZ
(in4)
IY
(in4)
SZ
(in3)
W14X90'
90.0
26.5
14.02
999.0.
362.0
143.0
W12X58'
58.0
17.0
12.19
475.0
107.0
78.0
W4X13'
13.0
3.83
4.16
11.3
3.86
5.46
W10X100'
100.0
29.4
11.1
623.0
207.0
112.0
W16X50'
50.0
14.7
16.26
659.0
37.2
81.0
C5X9'
9.0
2.64
5.0
8.9
0.632
3.56
Figure 1.1-2
Rev U
-2-
GTTABLE
1.2
GTTABLE Commands
GTTABLE Commands
GTTABLE commands are organized into table operation blocks. Each operation
block performs one of the following functions:
INITIATE
MODIFY
DELETE
OUTPUT
ORDER
TRANSFER
Each table operation block must begin with an operation heading command. Specific
operation commands may be given only after the appropriate operation heading command
is given. All Table operation blocks, except OUTPUT, must be closed with a FILE
TABLE command.
In the discussion that follows the GTTABLE commands are presented in operation
blocks. An operation heading command is described, then the specific operation commands
appropriate for that block are described.
Before any specific command or operation heading commands can be processed, the
TABLE command must be given. This is accomplished with the following command:
TABLE (title)
Elements:
title = an optional 64-character description of the TABLE job which follows.
After TABLE command is given, the GTTABLE commands described in the
remainder of this document can be given.
-3-
Rev U
GTTABLE Commands
GTTABLE
Rev U
-4-
GTTABLE
2.0
INITIATE Command
INITIATE Command
name
= The name of the table that is being created, which cannot be more
than 8 characters and is required.
EXAMPLE:
INITIATE USER TABLE <EXSTEEL
or
INI USER EXSTEEL
The above examples all create the same table EXSTEEL in the user data set without
a password.
-5-
Rev U
INITIATE Command
GTTABLE
Rev U
-6-
GTTABLE
3.1
...
...
C
C
C
Name of the heading to be added to the table with no
more than 8 characters. No duplication of names may
exist within a table.
This command may be used in either the INITIATE or MODIFY an operation block.
This command allows the creation of new headings in the table. The ADD HEADINGS
command is followed by the name of the heading and the associated dimensions. The value
of n corresponds to the exponent of the dimension, assume 1 if not given.
EXAMPLE:
ADD HEADINGS
<WEIGHT WEIGHT 1 LENGTH 1
<AX LENGTH 2
<YD L 1
$
DEPTH
<IZ L 4
<IY L 4
-7-
Rev U
3.2
GTTABLE
nameh1
v11
v21
C
C
C
namehi
namesi
vim
nameh2
v12
v22
C
C
C
nameh2'
v13
v23
C
C
C
... )
...
...
C
C
C
This command can be used in the INITIATE and MODIFY operation blocks. It is
used to add new items to the table.
EXAMPLE:
UNITS INCH POUND
ADD ITEMS
WEIGHT
W14X90
7.5
W12X58
4.8333
W4X13
1.0833
W10X100
8.3333
W16X50
4.1667
C5X9
0.75
FILE TABLE
AX
26.5
17.0
3.83
29.4
14.75
2.64
YD
14.02
12.19
4.16
11.1
16.26
5.0
IZ
990.0
475.0
11.3
623.0
659.0
8.9
IY
362.0
107.0
3.86
207.0
37.2
0.632
SZ
143.0
78.0
5.46
112.0
81.0
3.56
Note that the value of AX for the item W16X50 intentionally is specified as 14.75
so we can show how to use the MODIFY ITEMS option to change it to 14.7.
Rev U
-8-
GTTABLE
4.1
MODIFY Command
MODIFY Command
( )
EXAMPLE:
MODIFY USER TABLE
WSHAPES
MYPASSWD
-9-
Rev U
4.2
GTTABLE
names1
v11
v12
...
names2
v21
v22
...
namehi
namesi
vim
This command can be used with the operation heading command MODIFY. The
operation heading command (MODIFY) must appear before the MODIFY ITEMS
command.
EXAMPLE:
MODIFY USER TABLE EXSTEEL
MODIFY ITEMS
AX
W16X50
14.7
FILE TABLE
This example replaces the old value of AX for section W16X50 with the new value of
14.70.
Rev U
- 10 -
GTTABLE
5.1
ORDER Command
ORDER Command
name
PASSWORD
If the keywords FOR STRUDL are included, table will automatically produce the
orderings used by GTSTRUDL. When this is done, no other commands should be used in
the ORDER operation block.
FILE TABLE should always end this operation block.
EXAMPLE:
ORDER USER TABLE EXSTEEL
ORDER BY INCREASING AX
ARRANGE SZ ON ORDERING AX WITH ID AXSZ
FILE TABLE
- 11 -
Rev U
ORDER BY Command
5.2
GTTABLE
ORDER BY Command
namehi
This command is used with the ORDER operation heading command. This
command is used to specify what heading is to be ordered and in what direction the ordering
is to proceed.
This command should be followed by FILE TABLE.
EXAMPLE:
ORDER USER TABLE EXSTEEL
ORDER BY INCREASING AX
ARRANGE SZ ON ORDERING AX WITH ID AXSZ
FILE TABLE
Rev U
- 12 -
GTTABLE
5.3
ARRANGE Command
ARRANGE Command
ARRANGE name2 (ON) (ORDERING) name1 (WITH) (ID) id
name2
name1
id
This command is used within the ORDER operation block. It arranges the specified
heading in the same sequence as a specified ordering. The ordering should already exist.
EXAMPLE:
ORDER USER TABLE EXSTEEL
ORDER BY INCREASING AX
ARRANGE SZ ON ORDERING AX WITH ID AXSZ
FILE TABLE
- 13 -
Rev U
ARRANGE Command
GTTABLE
Rev U
- 14 -
GTTABLE
6.1
TRANSFER Command
TRANSFER Command
name1
name2
PASSWORD =
Password for the second table, which must agree if the table has
been already created.
ALL
This operation heading command is used to transfer all or part of an existing table
to another table that already exists or to a new table. Allowable operations within this
operation heading block are:
TRANSFER ITEMS
- 15 -
Rev U
6.2
GTTABLE
itemi
n1
n2
This command may only be used within the TRANSFER heading block. This
command is used to transfer only a portion of an existing table to another table.
Rev U
- 16 -
GTTABLE
7.1
DELETE Command
DELETE Command
{ }
This operation heading command is used to delete all or part of an existing table. If
a password was used when the table was created, then the password must be specified here.
The other commands allowed within this operation heading block are:
DELETE ITEMS
DELETE HEADINGS
If ALL is specified, the entire table is deleted and no other commands are
necessary. If ALL is not specified, then one of the allowable commands below (DELETE
HEADINGS or DELETE ITEMS) is expected to follow this command.
- 17 -
Rev U
7.2
GTTABLE
namehi
7.3
namesi
Rev U
- 18 -
GTTABLE
8.1
OUTPUT Command
OUTPUT Command
name
FORMAT F
FORMAT E
ALL
This operation heading command is used to output the table information. A password
is not needed to obtain the information. The allowable commands within this operation
heading command are:
PRINT HEADINGS
PRINT ITEMS
PRINT ITEM NAMES
PRINT ORDERINGS
- 19 -
Rev U
8.2
GTTABLE
namehi
8.3
n2
Rev U
- 20 -
GTTABLE
8.4
This command is used within the OUTPUT operation heading command. It is used
to obtain a listing of the item names within the table, but not the associated data values.
8.5
nameoi
nameo1
nameo2 ...
This command is contained within the OUTPUT operation heading command. This
command outputs the orderings listed for the table.
- 21 -
Rev U
Rev U
- 22 -
GTTABLE
GTTABLE
9.0
UNITS Command
UNITS Command
*
EXAMPLE:
UNITS MM KN DEGREE
- 23 -
Rev U
UNITS Command
GTTABLE
Rev U
- 24 -
GTTABLE
LIST Command
This operation may be used between operation blocks to find out what tables are
contained on each data set.
- 25 -
Rev U
CHANGE Command
GTTABLE
Rev U
- 26 -
GTTABLE
LIST Command
This command allows the user to change the password for a table. The command
should be used between operation heading blocks.
If the old password is non-existent, then the FROM OLDPSWD can be omitted.
- 27 -
Rev U
CHANGE Command
GTTABLE
Rev U
- 28 -
GTTABLE
EXAMPLE 1
- 29 -
Rev U
EXAMPLE 2
GTTABLE
Rev U
- 30 -
GTTABLE
EXAMPLE 2
- 31 -
13502.4375 15.0000 -
6752.4370 15.0000 -
9148.3760 14.0000 -
Rev U
EXAMPLE 2
$
'PG86X464'
$
'PG74X423'
$
'PG74X301'
$
'PG49X197'
$
'PG45X128'
$
'PG36X300'
GTTABLE
136.5000
184401.0000
392.1221
52.5000
87.0000
4239.1035
56.0000
43.5000
0.0000
69.8359
28.0000
0.0000
5489.7090 14.0000 -
124.6125
132504.2813
336.0892
40.6125
75.7000
3500.7737
56.0000
37.8500
0.0000
90.0333
24.0000
0.0000
4033.0708 12.0000 -
88.5000
81448.0000
192.0890
40.5000
74.0000
2201.2974
32.0000
37.0000
0.0000
20.2715
24.0000
0.0000
2305.0679 12.0000 -
58.0000
27716.8340
106.6930
18.0000
50.5000
1097.6964
26.6667
25.2500
0.0000
21.6771
16.0000
0.0000
853.5443 8.0000 -
37.7500
14234.8330
64.0140
13.7500
45.5000
625.7070
16.0000
22.7500
0.0000
4.9476
16.0000
0.0000
512.1119 8.0000 -
87.5049
20138.9023
155.6197
31.5441
36.7400
1096.2930
37.3072
18.3700
0.0000
62.0378
16.6550
0.0000
1295.9235 8.3275 -
$
FILE TABLE
$
$
OUTPUT USER TABLE 'WELDPG' ALL
$
FINISH
Rev U
- 32 -
GTTABLE
EXAMPLE 2
Table 12.2-1
Description
AX
Cross-section area
AY
AZ
IX
Torsion constant
IY
IZ
YD
YC
ZD
ZC
SY
SZ
EY
EZ
- 33 -
Rev U
EXAMPLE 3
GTTABLE
Rev U
- 34 -
GTTABLE
EXAMPLE 3
'GRPNUM'
'SHAPE'
$
$
ADD ITEMS
$
$
'W16X50'
'W14X48'
'W12X45'
'S8X23'
16.000
16.260
42.800
81.000
1.590
15.000
1.000
14.000
13.790
40.600
70.300
1.910
12.600
1.000
12.000
12.060
36.000
58.100
1.940
10.910
1.000
8.000
8.000
18.100
16.200
0.798
7.148
1.000
4.167
0.380
1.840
6.680
92.000
8.130
1.000
4.000
0.340
2.130
5.850
78.400
6.895
1.000
3.750
0.335
2.150
5.150
64.700
6.030
1.000
1.917
0.441
0.950
3.100
0.550
4.000
1.100
- 35 -
14.700
7.070
3.650
37.200
16.300
3.535
6.179
0.630
659.000
10.500
1.520
0.000
5.939
5.600
81.000
10.500
2270.000
0.000
14.100
8.030
2.890
51.400
19.600
4.015
4.689
0.595
485.000
12.800
1.460
0.000
6.370
6.700
70.300
12.800
2240.000
0.000
13.200
8.045
2.610
50.000
19.000
4.022
4.040
0.575
350.000
12.400
1.310
0.000
6.168
7.000
58.100
12.400
1650.000
0.000
6.770
4.171
4.510
4.310
19.300
2.086
3.528
0.426
64.900
2.070
3.680
0.000
2.369
4.900
16.200
2.070
61.800
0.000
Rev U
EXAMPLE 3
'HP8X36'
'M10X9'
GTTABLE
8.000
8.020
18.000
29.800
1.950
7.130
2.000
10.000
10.000
63.700
7.760
0.480
9.588
1.000
3.000
0.445
2.180
3.360
0.770
4.010
1.200
0.750
0.157
0.610
3.830
0.030
5.000
1.300
10.600
8.155
2.210
40.300
33.600
4.078
3.569
0.445
119.000
9.880
15.200
0.000
4.839
9.200
29.800
9.880
578.000
0.000
2.650
2.690
18.000
0.609
9.190
1.345
1.570
0.206
38.800
0.453
0.765
0.000
0.739
6.500
7.760
0.453
14.600
0.000
FILE TABLE
$
$
$ Following ORDER command is required for SELECT MEMBERS command.
$
ORDER USER TABLE 'ISHAPES' FOR STRUDL
FILE TABLE
$
OUTPUT USER TABLE 'ISHAPES' FORMAT F ALL
$
$
FINISH
Rev U
- 36 -
GTTABLE
EXAMPLE 3
Table 12.3-1
Description
AX
cross-section area
AY
Y axis shear area computed as the profile depth times the web thickness
AZ
IX
IY
IZ
RY
RZ
RT
radius of gyration for the flange and 1/3 of the compression web area
about an axis in the plane of the web; for these shapes 1/3 of the
compression web area is 1/6 of the total web area
ZY
ZZ
SY
SYS
SY
SZ
SZS
SZ
FLTK
flange thickness
WBTK
web thickness
YD
profile depth
YC
positive Y direction distance from the Z axis to the extreme fiber along the
Y axis
ZD
flange width
ZC
the positive Z direction distance from the Y axis to the extreme fiber along
the Z axis
- 37 -
Rev U
EXAMPLE 3
GTTABLE
Table 12.3-1 (continued)
GTSTRUDL Table Properties for Analysis and Steel Design
Property
Description
INTYD
clear depth of the web computed as the profile depth minus twice the
flange thickness
BF/2TF
b/t ratio of the flange computed as the flange width divided by the
flange thickness
D/TW
YD/AFL
EY
EZ
CW
warping constant
ND
nominal depth
WEIGHT
profile group number taken from Table 1 and 2 of the AISC ASD Manual
of Steel Construction Ninth Edition
GRPNUM
profile group number taken from Table 1 and 2 of the AISC ASD Manual
of Steel Construction Ninth Edition
SHAPE
Rev U
- 38 -
GTTABLE
EXAMPLE 4.1
Rev U
EXAMPLE 4.1
GTTABLE
Rev U
- 40 -
GTTABLE
EXAMPLE 4.2
YD
IZ
W14X90'
7.9167
26.5
14.02
999.0
W12X58'
4.8333
17.0
12.19
475.0
W4X13'
1.0833
3.83
4.16
11.3
W10X100'
8.3333
29.4
11.1
623.0
W16X50'
4.1667
14.75
16.26
659.0
C5X9'
0.75
2.64
5.0
8.9
FILE TABLE
$
$ CHANGE THE VALUE OF AX FOR SECTION W16X50
$ WITH A NEW VALUE OF 14.70.
$
MODIFY USER TABLE EXSTEEL
MODIFY ITEMS AX
W16X50' 14.7
FILE TABLE
OUTPUT USER TABLE EXSTEEL ALL
- 41 -
IY
362.0
107.0
3.86
207.0
37.2
0.632
SZ
143.0
78.0
5.46
112.0
81.0
3.56
Rev U
EXAMPLE 4.2
GTTABLE
*****************************
* TABLE OUTPUT EXSTEEL *
*****************************
HEADINGS
WEIGHT
AX
YD
IZ
IY
SZ
LB
INCH
INCH
INCH
INCH
INCH
1
2
1
4
4
3
INCH
-1
TABLE DATA
WEIGHT
W14X90 7.916700
W12X58 4.833300
W4X13
1.083300
W10X100 8.333300
W16X50 4.166700
C5X9
0.750000
AX
26.500000
17.000000
3.820000
29.400000
14.750000
2.640000
DEPTH
14.020000
12.190000
4.160000
11.100000
16.250000
5.000000
IZ
IY
SZ
999.000000 362.000000 143.000000
475.000000 107.000000 78.000000
11.300000
3.860000
5.460000
623.000000 207.000000 112.000000
659.000000 37.020000 81.000000
8.900000
0.632000
3.560000
Rev U
LB
INCH
INCH
INCH
INCH
INCH
1
2
1
4
4
3
INCH
-1
- 42 -
GTTABLE
EXAMPLE 4.2
TABLE DATA
WEIGHT
7.916700
4.833300
1.083300
8.333300
4.166700
0.750000
W14X90
W12X58
W4X13
W10X100
W16X50
C5X9
AX
26.500000
17.000000
3.820000
29.400000
14.700000
2.640000
DEPTH
14.020000
12.190000
4.160000
11.100000
16.250000
5.000000
IZ
IY
SZ
999.000000 362.000000 143.000000
475.000000 107.000000 78.000000
11.300000
3.860000
5.460000
623.000000 207.000000 112.000000
659.000000 37.020000 81.000000
8.900000
0.632000
3.560000
ORDERING
ITEMS
C5X9
W4X13
W16X50
W12X58
W14X90
W10X100
AX
--INCH 2
2.6400001
3.8300000
14.700000
17.000000
26.500000
29.400000
AXSZ
= SZ ARRANGED ON ORDERING AX
ITEMS
AXSZ
C5X9
W4X13
W16X50
W12X58
W14X90
W10X100
--INCH 4
3.560000
5.460000
81.000000
78.000000
143.000000
112.000000
- 43 -
Rev U
EXAMPLE 4.2
GTTABLE
*****************************
* TABLE OUTPUT TRIAL
*
*****************************
HEADINGS
WEIGHT
AX
YD
IZ
IY
SZ
LB
INCH
INCH
INCH
INCH
INCH
1
2
1
4
4
3
INCH
-1
TABLE DATA
W14X90
W12X58
W4X13
W10X100
W16X50
C5X9
WEIGHT
7.916700
4.833300
1.083300
8.333300
4.166700
0.750000
AX
26.500000
17.000000
3.820000
29.400000
14.700000
2.640000
DEPTH
14.020000
12.190000
4.160000
11.100000
16.250000
5.000000
IZ
IY
SZ
999.000000 362.000000 143.000000
475.000000 107.000000 78.000000
11.300000
3.860000
5.460000
623.000000 207.000000 112.000000
659.000000 37.020000 81.000000
8.900000
0.632000
3.560000
Rev U
- 44 -
GTTABLE
EXAMPLE 4.2
LB
INCH
INCH
INCH
INCH
INCH
1
2
1
4
4
3
INCH
-1
TABLE DATA
W14X90
W12X58
W4X13
W10X100
W16X50
WEIGHT
7.916700
4.833300
1.083300
8.333300
4.166700
AX
26.500000
17.000000
3.820000
29.400000
14.700000
DEPTH
14.020000
12.190000
4.160000
11.100000
16.250000
IZ
IY
SZ
999.000000 362.000000 143.000000
475.000000 107.000000 78.000000
11.300000
3.860000
5.460000
623.000000 207.000000 112.000000
659.000000 37.020000 81.000000
- 45 -
Rev U
EXAMPLE 5.1
GTTABLE
Rev U
- 46 -
GTTABLE
Example 5.2
W14X342
W14X202
W14X142
W14X95
W14X53
W14X665
W14X314
W14X193
W14X320
W14X87
W14X48
W14X550
W14X264
W14X184
W14X136
W14X84
W14X48
W14X500
W14X246
W14X176
W14X127
W14X78
W14X38
W14X426
W14X237
W14X167
W14X119
W14X74
W14X34
W14X398
W14X228
W14X158
W14X111
W14X68
W14X30
W14X370
W14X211
W14X150
W14X103
W14X61
W14X26
W14X22
Rev U
Example 5.2
GTTABLE
*****************************
* TABLE OUTPUT WSECT
*
*****************************
HEADINGS
AX INCH 2 SY INCH 3 RY
INCH
AY INCH 2 SZ INCH 3 RZ
INCH
AZ INCH 2 YD INCH 1 EY
INCH
IX INCH 4 ZD INCH 1 EZ
INCH
IY INCH 4 YC INCH 1 FLTK INCH
IZ INCH 4 ZC INCH 1 WBTK INCH
1
1
1
1
1
1
YD/AFL
COMP
WEIGHT
ZZ
ZY
INTYD
INCH -1
RT
INCH 1
BF/2TF
LB
1 INCH -1 D/TW
INCH 3
GRPNUM
INCH 3
SHAPE
INCH 1
TABLE DATA
AX
SZ
EY
ZZ
SHAPE
W14X730
W12X665
W14X550
W10X500
215.000000
1280.000000
0.000000
1660.000000
1.000000
196.000000
1150.000000
0.000000
1480.000000
1.000000
162.000000
933.000000
0.000000
1180.000000
1.000000
147.000000
840.000000
0.000000
1050.000000
1.000000
Rev U
AY
YD
EZ
ZY
AZ
ZD
FLTK
INTYD
IX
YC
WBTK
RT
IY
ZC
YD/AFL
BF/2TF
IZ
RY
COMP
D/TW
SY
RZ
WEIGHT
GRPNUM
87.589996
17.205999
3.818000
12.624000
670.000000 3260.000000
10.130000
8.603000
2.386000
0.308000
5.000000
2.250000
9450.000000 378.000000
4.490000
7.640000
1.000000 45.833000
8.490000
4.000000
42.950001
19.629999
0.000000
522.000000
79.392998
17.007999
3.501000
12.628000
514.000000 2880.000000
9.815000
8.504000
2.188000
0.330000
4.920000
2.430000
8250.000000 339.000000
4.430000
7.490000
1.000000 41.667000
8.970000
4.000000
- 48 -
GTTABLE
W16X426
W14X398
W16X370
W14X342
W16X314
W14X264
W16X246
W14X237
125.000000 35.043999
707.000000 18.690001
0.000000
0.000000
869.000000 434.000000
1.000000
117.000000 32.409000
657.000000 18.309999
0.000000
0.000000
802.000000 401.000000
1.000000
109.000000 29.691000
608.000000 17.940001
0.000000
0.000000
737.000000 370.000000
1.000000
101.000000 27.129999
559.000000 17.559999
0.000000
0.000000
673.000000 338.000000
1.000000
92.300003 24.323999
512.000000 17.190001
0.000000
0.000000
611.000000 307.000000
1.000000
77.5999980 19.882000
427.000000 16.500000
0.000000
0.000000
502.000000 254.000000
1.000000
72.300003 18.281000
397.000000 16.250000
0.000000
0.000000
464.000000 235.000000
1.000000
69.699997 17.570999
382.000000 16.120001
0.000000
0.000000
445.000000 225.000000
1.000000
Example 5.2
67.514000
16.695000
3.033000
12.624000
330.000000 2360.000000
9.345000
8.347000
1.875000
0.369000
4.810000
2.750000
6610.000000 283.000000
4.340000
7.260000
1.000000 35.500000
9.970000
4.000000
62.887001
16.590000
2.843000
12.624000
272.000000 2170.000000
9.155000
8.295000
1.770000
0.388000
4.760000
2.920000
6010.000000 262.000000
4.310000
7.170000
1.000000 33.167000
10.300000
4.000000
58.387001
16.475000
2.658000
12.624000
220.000000 1990.000000
8.970000
8.237000
1.655000
0.410000
4.720000
3.100000
5450.000000 241.000000
4.270000
7.080000
1.000000 30.833000
10.800000
4.000000
53.852001
16.365000
2.468000
12.624000
178.000000 1810.000000
8.780000
8.182000
1.545000
0.435000
4.680000
3.320000
4910.000000 221.000000
4.240000
6.990000
1.000000 28.500000
11.400000
4.000000
49.418999
16.235001
2.283000
12.624000
140.000000 1630.000000
8.595000
8.117000
1.415000
0.464000
4.630000
3.560000
4400.000000 201.000000
4.200000
6.900000
1.000000 26.167000
12.100000
4.000000
41.409001
16.025000
1.938000
12.624000
85.300003 1330.000000
8.250000
8.012000
1.205000
0.531000
4.540000
4.130000
3530.000000 166.000000
4.140000
6.740000
1.000000 22.000000
13.700000
4.000000
38.543999
15.945000
1.813000
12.624000
69.699997 1230.000000
8.125000
7.972000
1.125000
0.562000
4.510000
4.400000
3230.000000 154.000000
4.120000
6.680000
1.000000 20.500000
14.400000
4.000000
37.081001
15.910000
1.748000
12.624000
62.599998 1170.000000
8.060000
7.955000
1.090000
0.585000
4.500000
4.550000
3080.000000 148.000000
4.110000
6.650000
1.000000 19.750000
14.800000
4.000000
- 49 -
Rev U
Example 5.2
W16X228
W14X211
W16X202
W14X193
W16X184
W14X176
W16X167
W14X158
67.099998
368.000000
0.000000
427.000000
1.000000
62.099998
339.000000
0.000000
391.000000
1.000000
59.400002
325.000000
0.000000
373.000000
1.000000
56.700001
310.000000
0.000000
355.000000
1.000000
54.099998
296.000000
0.000000
338.000000
1.000000
51.700001
282.000000
0.000000
321.000000
1.000000
49.099998
267.000000
0.000000
303.000000
1.000000
46.500000
253.000000
0.000000
286.000000
1.000000
Rev U
GTTABLE
16.719999
16.000000
0.000000
216.000000
35.707001
15.865000
1.688000
12.624000
56.200001 1120.00000
8.000000
7.932000
1.045000
0.597000
4.480000
4.700000
2940.000000 142.000000
4.100000
6.620000
1.000000 19.000000
15.300000
4.000000
15.435000
15.750000
0.000000
198.000000
32.926998
15.800000
1.563000
12.624000
44.799999
7.875000
0.980000
4.460000
103.000000
7.900000
0.638000
5.050000
2670.000000 130.000000
4.070000
6.560000
1.000000 17.583000
16.100000
3.000000
14.536000
15.630000
0.000000
189.000000
31.563000
15.750000
1.503000
12.624000
39.599998
7.815000
0.930000
4.440000
980.000000
7.875000
0.660000
5.240000
2540.000000 124.000000
4.060000
6.540000
1.000000 16.833000
16.799999
3.000000
13.795000
15.500000
0.000000
180.000000
30.121000
15.710000
1.438000
12.624000
34.700001
7.750000
0.890000
4.420000
930.000000
7.855000
0.686000
5.460000
2400.000000 118.000000
4.050000
6.510000
1.000000 16.083000
17.400000
3.000000
12.919000
15.380000
0.000000
171.000000
28.773001
15.660000
1.378000
12.624000
30.299999
7.690000
0.840000
4.410000
883.000000
7.830000
0.713000
5.680000
2270.000000 113.000000
4.040000
6.490000
1.000000 15.333000
18.299999
3.000000
12.505000
15.250000
0.000000
163.000000
27.379999
15.640000
1.313000
12.624000
26.500000
7.625000
0.820000
4.390000
838.000000
7.820000
0.743000
5.960000
2150.000000 107.000000
4.020000
6.450000
1.000000 14.667000
18.600000
3.000000
11.794000
15.120000
0.000000
154.000000
25.958000
15.600000
1.248000
12.624000
22.799999
7.560000
0.780000
4.380000
790.000000
7.800000
0.777000
6.250000
2020.000000 101.000000
4.010000
6.420000
1.000000 13.917000
19.400000
3.000000
10.950000
15.000000
0.000000
145.000000
24.631001
15.550000
1.188000
12.624000
19.500000
7.500000
0.730000
4.360000
745.000000
7.775000
0.812000
6.540000
1900.000000
4.000000
1.000000
20.500000
- 50 -
95.800003
6.400000
13.167000
3.000000
GTTABLE
W16X150
W14X142
W16X320
W14X136
W16X127
W14X119
W16X111
W14X103
44.099998
240.000000
0.000000
270.000000
1.000000
41.799999
227.000000
0.000000
255.000000
1.000000
94.099998
493.000000
0.000000
592.000000
1.000000
40.000000
216.000000
0.000000
243.000000
1.000000
37.299999
202.000000
0.000000
226.000000
1.000000
35.000000
189.000000
0.000000
211.000000
1.000000
32.700001
176.000000
0.000000
196.000000
1.000000
30.299999
164.000000
0.000000
181.000000
1.000000
Example 5.2
10.342000
14.880000
0.000000
137.000000
23.334999
15.515000
1.128000
12.624000
16.700001
7.440000
0.695000
4.350000
703.00000
7.757000
0.850000
6.880000
1790.000000
3.990000
1.000000
21.400000
90.599998
6.370000
12.500000
3.000000
10.030000
14.750000
0.000000
129.000000
21.969000
15.500000
1.063000
12.624000
14.200000
7.375000
0.680000
4.330000
660.000000
7.750000
0.895000
7.290000
1670.000000
3.970000
1.000000
21.700001
85.199997
6.320000
11.833000
3.000000
31.771000
16.809999
0.000000
304.000000
46.632000
16.709999
2.093000
12.624000
9.735000
14.750000
0.000000
117.000000
20.891001
14.740000
1.063000
12.624000
13.500000
7.375000
0.660000
4.120000
568.000000
7.370000
0.941000
6.930000
1590.000000
3.770000
1.000000
22.299999
77.000000
6.310000
11.333000
2.000000
8.918000
14.620000
0.000000
109.000000
19.547001
14.690000
0.998000
12.624000
11.100000
7.310000
0.610000
4.100000
528.000000
7.345000
0.997000
7.360000
1480.000000
3.760000
1.000000
24.000000
71.800003
6.290000
10.583000
2.000000
8.265000
14.500000
0.000000
102.000000
18.322001
14.650000
0.938000
12.624000
9.200000
7.250000
0.570000
4.080000
492.000000
7.325000
1.055000
7.810000
1370.000000
3.750000
3.000000
25.400000
67.099998
6.260000
9.917000
2.000000
7.760000
14.370000
0.000000
94.300003
17.018000
14.620000
0.873000
12.624000
7.480000
7.185000
0.540000
4.070000
455.000000
7.310000
1.126000
8.370000
1270.000000
3.730000
3.000000
26.600000
62.200001
6.230000
9.250000
2.000000
7.054000
14.250000
0.000000
87.199997
15.799000
14.575000
0.813000
12.624000
6.020000
7.125000
0.495000
4.050000
420.000000
7.287000
1.203000
8.960000
1170.000000
3.720000
2.000000
28.799999
57.599998
6.210000
8.583000
2.000000
137.000000 1640.000000
8.405000
8.355000
1.890000
0.481000
4.730000
3.990000
- 51 -
4140.000000 196.000000
4.170000
6.630000
1.000000 26.667000
8.890000
4.000000
Rev U
Example 5.2
GTTABLE
W14X95
27.900000
151.000000
0.000000
166.000000
1.000000
6.566000
14.120000
0.000000
79.900002
14.506000
14.545000
0.748000
12.624000
4.740000
7.060000
0.465000
4.040000
384.000000
7.272000
1.298000
9.720000
1060.000000
3.710000
2.000000
30.400000
52.799999
6.170000
7.917000
2.000000
W16X87
25.600000
138.000000
0.000000
151.000000
1.000000
24.700001
131.000000
0.000000
145.000000
1.000000
22.900000
121.000000
0.000000
134.000000
1.000000
21.799999
112.000000
0.000000
126.000000
1.000000
20.000000
103.000000
0.000000
115.000000
1.000000
17.900000
92.199997
0.000000
102.000000
1.000000
15.600000
77.800003
0.000000
87.099998
1.000000
5.880000
14.000000
0.000000
73.000000
13.301000
14.500000
0.688000
12.624000
3.680000
7.000000
0.420000
4.020000
350.000000
7.250000
1.403000
10.500000
967.000000
3.700000
2.000000
33.299999
48.200001
6.150000
7.250000
2.000000
6.395000
14.180000
0.000000
57.000000
12.472000
12.023000
0.778000
12.624000
4.410000
7.090000
0.451000
3.320000
225.000000
6.011000
1.516000
7.730000
928.000000
3.020000
3.000000
31.400000
37.500000
6.130000
7.000000
2.000000
6.018000
14.060000
0.000000
52.400002
11.488000
12.000000
0.718000
12.624000
3.520000
7.030000
0.428000
3.310000
207.000000
6.000000
1.632000
8.360000
851.000000
3.000000
3.000000
32.900002
34.500000
6.090000
6.500000
2.000000
6.385000
14.190000
0.000000
40.500000
10.515000
10.072000
0.783000
12.624000
3.860000
7.095000
0.450000
2.760000
133.000000
5.036000
1.799000
6.430000
797.000000
2.480000
1.000000
31.500000
26.500000
6.050000
6.167000
2.000000
5.877000
14.060000
0.000000
36.799999
9.612000
10.040000
0.718000
12.624000
3.010000
7.030000
0.418000
2.740000
121.000000
5.020000
1.950000
6.990000
724.000000
2.460000
1.000000
33.599998
24.100000
6.020000
5.667000
2.000000
5.258000
13.910000
0.000000
32.700001
8.573000
10.000000
0.643000
12.624000
2.190000
6.955000
0.378000
2.730000
107.000000
5.000000
2.163000
7.780000
641.000000
2.450000
3.000000
36.799999
21.500000
5.980000
5.083000
2.000000
5.158000
13.940000
0.000000
21.900000
7.073000
8.062000
0.658000
12.624000
1.930000
6.970000
0.370000
2.180000
57.50000
4.031000
2.628000
6.130000
542.000000
1.920000
1.000000
37.700001
14.300000
5.900000
4.417000
1.000000
W14X84
W16X78
W14X74
W16X68
W14X61
W16X53
Rev U
- 52 -
GTTABLE
W14X48
W16X43
W14X38
W16X34
W14X30
W16X26
W14X22
14.100000
70.199997
0.000000
78.400002
1.000000
12.600000
62.700001
0.000000
69.699997
1.000000
11.200000
54.700001
0.000000
61.599998
1.000000
10.000000
48.599998
0.000000
54.599998
1.000000
8.830000
41.900002
0.000000
47.200001
1.000000
7.670000
35.099998
0.000000
40.000000
1.000000
6.490000
28.900000
0.000000
33.099998
Example 5.2
4.682000
13.810000
0.000000
19.600000
6.350000
8.031000
0.593000
12.624000
1.440000
6.905000
0.339000
2.160000
51.299999
4.015000
2.900000
6.770000
485.000000
1.910000
1.000000
40.700001
12.800000
5.860000
4.000000
1.000000
4.213000
13.680000
0.000000
17.299999
5.632000
8.000000
0.528000
12.624000
1.050000
6.840000
0.308000
2.140000
45.099998
4.000000
3.239000
7.580000
429.000000
1.890000
3.000000
44.400002
11.300000
5.820000
3.583000
1.000000
4.420000
14.120000
0.000000
12.100000
4.635000
6.776000
0.513000
13.094000
0.796000
7.060000
0.313000
1.800000
26.600000
3.388000
4.062000
6.600000
386.000000
1.540000
1.000000
45.099998
7.860000
5.880000
3.167000
1.000000
4.018000
14.000000
0.000000
10.600000
4.077000
6.750000
0.453000
13.094000
0.567000
7.000000
0.287000
1.780000
23.299999
3.375000
4.579000
7.450000
340.000000
1.520000
3.000000
48.799999
6.890000
5.830000
2.833000
1.000000
3.742000
13.860000
0.000000
8.950000
3.438000
6.733000
0.383000
13.094000
0.376000
6.930000
0.270000
1.750000
19.500000
3.366000
5.375000
8.790000
290.000000
1.490000
3.000000
51.299999
5.800000
5.740000
2.500000
1.000000
3.542000
13.890000
0.000000
5.520000
2.801000
5.025000
0.418000
13.054000
0.355000
6.945000
0.255000
1.290000
8.860000
2.512000
6.613000
6.010000
244.000000
1.080000
1.000000
54.500000
3.530000
5.640000
2.167000
1.000000
3.156000
13.720000
0.000000
4.390000
2.233000
5.000000
0.335000
13.050000
0.208000
6.860000
0.230000
1.260000
7.000000
2.500000
8.191000
7.460000
198.000000
1.040000
3.000000
59.700001
2.800000
5.530000
1.833000
1.000000
FINISH
- 53 -
Rev U
Example 5.2
GTTABLE
End of Document.
Rev U
- 54 -