This document describes a new type of nano-photonic detector for detecting radiation. It overcomes drawbacks of traditional scintillation and solid-state detectors by using a composite scintillation material developed from gadolinium, cerium bromide, silica, and alumina suspended in a glass matrix. This material works by absorbing gamma ray energy with gadolinium and transmitting it to cerium bromide, which releases the energy as visible light detectable by the detector. The new detector could increase nuclear surveillance and prevent smuggling of radioactive materials.
This document describes a new type of nano-photonic detector for detecting radiation. It overcomes drawbacks of traditional scintillation and solid-state detectors by using a composite scintillation material developed from gadolinium, cerium bromide, silica, and alumina suspended in a glass matrix. This material works by absorbing gamma ray energy with gadolinium and transmitting it to cerium bromide, which releases the energy as visible light detectable by the detector. The new detector could increase nuclear surveillance and prevent smuggling of radioactive materials.
This document describes a new type of nano-photonic detector for detecting radiation. It overcomes drawbacks of traditional scintillation and solid-state detectors by using a composite scintillation material developed from gadolinium, cerium bromide, silica, and alumina suspended in a glass matrix. This material works by absorbing gamma ray energy with gadolinium and transmitting it to cerium bromide, which releases the energy as visible light detectable by the detector. The new detector could increase nuclear surveillance and prevent smuggling of radioactive materials.
will increase nuclear surveillance preventing smuggling of radioactive materials. Two common radiation detectors: i. Scintillation detectors ii. Solid-state detectors But they have their drawbacks
The
drawbacks we overcome by the use of
Nano-photonic Composite Scintillation Detector Figure 1. Examples of scintillators from molten glass. The wormlike blue structure is an artifact from the glassmolding process.
Figure 2. Georgia Tech Research Institute
researchers using novel materials and nanotechnology techniques to develop improved radiation detection.
Working methodology The
scintillation material has been developed
using gadolinium and cerium bromide combined with silica and alumina which suspended on glass matrix. Gadolinium is important material in scintillating detectors because its an absorber. Whenever, the gamma ray energy absorbed by gadolinium is not sufficiently converted into visible light. Instead, the gadolinium absorbs the energy and transmits it to the cerium bromide, which releases the energy in the visible spectrum. http://www.photonics.com/Article.aspx?